Used Edge Sanding Machine for sale (84,033)

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm Fjdpfxov N I Hlj Afnoft workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Ffodpfx Afsxy Tm Isnot

Condition: like new (used), Edge milling machine for deburring/beveling of various internal and external contours Bevel size adjustable up to max. 10 mm at 45° Ffodpfx Afetwcn Rjnjt Cutter 45° / 8 blades double row – KIF/MF. For steel, light metal, stainless steel, cast iron, non-ferrous metals Includes 21 packages of 10 indexable inserts X11.30.35.45 P25 BS TiCN Includes 7 packages of 10 fastening screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Ex works, excl. VAT.

Condition: excellent (used), functionality: fully functional, total length: 9,400 mm, overall weight: 4,000 kg, Feed rate infinitely variable from 18 - 24 m/min For edge material from rolls or strips up to 20 mm edge thickness Fsdpfx Aow Sdlmofneft Transport chain 80 mm wide with rubber padding Workpiece support in scissor design, extendable up to 1000 mm Infeed extension 500 mm Feeding unit with two driven, angled rollers Processing units: Jointing milling unit with 2 motors, each 3 kW A20 gluing unit HL83 end trimming unit, beveled/straight, with 2 motors each 0.5 kW Pre-milling unit with 2 motors each 1.5 kW FK 8-fold automatic contour trimming unit with 2 motors each 0.55 kW MN automatic multi scraper unit Glue joint scraper unit Buffing unit, top and bottom, with oscillation Chip conveyor belt Electronic frequency converters for processing units HOMATIC control system with NC21 input unit Machine length 9500 mm. Machine in good condition.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Ffodpfx Afew I Uhqenst Pressure unit 1913, pneumatic End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim

Condition: reconditioned (used), Year of construction: 2014, Advantage 400 single-sided edge banding machine Equipment: - Working length 6700 mm -divider top and bottom - jointing unit 08.380 - Radiator 300 long, 2 x 1.5 kW for preheating the workpiece edge - gluing unit 283.1516 toothed belt drive - Strip control to prevent incorrect gluing. - Rotary capping unit for workpiece leading and trailing edges - Space reserve for lubricant spraying at high-gloss edge - Milling unit 08.0561 - Copy milling unit SKF-L - Profile scraper unit 08.519 - Spray nozzles at top and bottom for application of cleaning agents - Self-feeding scraper unit 08.521 - Buffing unit 08.617-2 - Interior lighting - Electronic height adjustment of top pressure (one-sided) Technical data "workpiece - Workpiece length min.: 150 mm - Workpiece width min.: 65*/ 150 mm (*with max. workpiece thickness of 25 mm) - Workpiece thickness min.: 8 / 12* mm (*with profile scraper) - max. workpiece thickness: 60 mm - Smallest workpiece: 65x380 / 150x380 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm* (*observe max. cutting cross section) - workpiece shape: rectangular - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, foil, veneer - Laterally protruding coating material: 0 mm Technical data "Edge material Roll material without foil*: - Paper edges & plastic edges: 0.3 - 3.0 mm (*foil only with additional equipment) - veneer edges: 0.5 - 3.0 mm Edge cross-section for veneer max.: 150 mm² Edge cross-section for plastic edge max.: 180 mm² Cut-to-length edge strips: strips 3.0 - 12.0 mm Strip cross-section max.: 600 mm² Edge height min.: 12 mm Edge height max.: 65 mm Upper edge protrusion max.: 2 mm Edge profiles: - Paper edge approx. 0.4 mm (chamfer 15°) Ffedpfx Afoitu Easnot - Plastic edge up to 3.0 mm (radius depending on tool) - strip up to 12 mm (flush milling) Technical data "machine working length 6700 mm Feed speed 20 m/min for Advantage 400 Constant workpiece protrusion from the chain track: 35 mm + Edge thickness max. cross section: 520 mm² Throughfeed width min. (with 35 mm projection): 65 mm Workpiece length in feed direction min.: 150 mm basic height (upper edge of chain track): 900 mm Unit side: In feed direction left Control voltage: 24 V DC / 230 V AC Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5% (FI protection circuit not applicable) Machine control ICOS Expert Features: - PC-based control system with integrated PLC and electronic draw frame control - Simple, machining-related program creation - Navigation and operation via touch screen - Program memory for max. 1000 programs - Program number 3-digit numeric - Control system prepared for service portal Technical data control system:* - Panel PC with integrated 15" TFT display, with touch screen - USB connection - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 in the switchboard - Operating system: Windows with TwinCat system for real-time control Note: The technical data and descriptions are a copy of the order confirmation at that time. Data are for information only and are not binding. Condition: - Machine completely overhauled - upper pressure belt new - Feed chain new - Feeler wheels and tools of finishing new

Condition: new, machine/vehicle number: 7-KZM2, Edge gluing machine for gluing ABS and PVC edges to straight surfaces. It has an automatic panel feed and applies the glue directly to the panels. For edge thicknesses of 0.4 to 3 mm and panel thicknesses of 10 to 45 mm. It automatically cuts off the excess edge length at both panel edges and mills the excess edge of the panel flat or round at the top and bottom. Mechanical digital display for panel thickness, edge thickness and the milling units as standard. Electronic control of the glue temperature with digital thermometer. Table extension for wider panels included in the price. Machine is controlled by compressed air. Granules for the gluing device are liquefied in the melting tank. Control panel on top for convenient operation. Technical data: Table dimensions 1400 x 600 mm Table extension up to 500 mm Veneer roll carrier diameter 600 mm Panel thickness 10 - 45 mm Workpiece dimensions min. LxW 300 x 90 mm Ffedpfevw Ea Eox Afnst Feed speed 5 m/min Extraction nozzle diameter 120 mm Total motor output 3.2 kW S6 (2.4 Kw S1) Heating output 1260 W Compressed air connection 6.5 bar Weight 410 kg Accessories Optional: Roll carrier with 800 mm diameter Transport device

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Ffjdpfsxzi S Nex Afnet Working height / feed table height: 880 mm Location: Supplier

Condition: good (used), Year of construction: 2013, Edge Banding Machine Ffsdpfxjwmby Ss Afnet Manufacturer: Brandt Type: KDF 440 Year of Manufacture: 2013 Edge Thickness: 0.4 - 3 mm Workpiece Thickness: 8 - 60 mm Feed Rate: 8 - 14 m/min, Vario Joining Unit: Yes Pre-melting Unit: Yes Cross-Cut Saw Unit: Yes Radius Flush Trimming Unit: Yes Corner Rounding Unit: Yes Radius Scraper: Yes Surface Scraper: Yes Buffing Unit: Yes

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with rolling block chain (instead of standard chain), enhanced mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Includes: Edge banding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / feed table HOMAG POWER TBL100/30/30/S Ffsdpswvlhlefx Afnet Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F Edge bonding with PUR and EVA adhesives.

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, General Data Machine weight 23000 kg Main Drive Number of axis 3 Movement X-Axis Movement 15900 mm Z-Axis Movement 790 mm Ffjdpfxex I S Rqs Afnet Y-Axis Movement 500 mm This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Weight 1055 kg Fsdsx I Sgrjpfx Afneft

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Ffjdpfswzzivsx Afnet Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description Ffjdpfx Afoxfh Tmjnot With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: new, Machine stand in a torsion- and vibration-free design, extremely stable. Grinding unit adjustable up to 45° using a handwheel. Grinding belt oscillation with separate gear motor. Height-adjustable grinding table to utilize the entire belt width. Standard veneer edge grinding device with fine adjustment, contact shoe, relief rollers and stops. Height-adjustable additional table with suction for grinding radii. With spring-loaded belt tension. With table extension and feed console. 100% Made in EU (developed, built, quality tested) Ffjdpfx Afovrvctsnot Technical data: Table size 960 x 350 mm Table height adjustment 230 mm Belt length 3000 mm Belt width 200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor power 0.25 kW Main motor output 3.8 kW S6 400V (3 kW S1) Weight 400 kg Optional equipment: Miter stop

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Ffjdpfx Afjxq Apgonet

Condition: used, Storage location: Sonnefeld Ffodpfxsway Dco Afnot

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Fedpfxovvkdte Afnoft

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Ffodpfjvvkd Tsx Afnst Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fjdjvvkfdopfx Afnjft

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Ffsdpfx Afjvvkfqonjt Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Ffodevvkfwjpfx Afnst Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Ffedpfjxyiiljx Afnot Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Ffodevvkg Ijpfx Afnjt

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Fjdjw Aig Sspfx Afnoft