Used Ecomill 600 V for sale (41,962)

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-63-410-PPV-A -Stroke: 410mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 605/75/H75 mm Bdedpfx Ajqa I Iljmyef -Weight: 4,6 kg

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm Bodjd Tk Stspfx Amysdf -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Condition: good (used), starter Bdodpfsb A Nw Sex Amysf -Voltage: 24 V -81466 - 002 - 24 V 008 -Weight: 20 kg

Condition: good (used), pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-50-600 PPV-A -stroke: 600 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Pmax: 10 bar -Quantity: 2 pieces -Price: per piece -Dimensions: 780/145/H50 mm Bodpfxovq Igze Amyjdf -Weight: 7.4 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-63-600-PPV-A Bdedpfxjqa I H Sj Amyjf -Stroke: 600mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Max. Pressure: 12 bars -Dimensions: 790/75/H110 mm -Weight: 6,2 kg

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel Bdsdedahcvepfx Amyof -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-40-600-PPV -Piston: Ø 40 mm -Stroke: 600 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece Bedpfxodkzvqo Amyodf -Dimensions: 55/55/H785 mm -Weight: 3.45 kg

Condition: ready for operation (used), Year of construction: 2007, Make: MIKRON / GF AGIECHARMILLES Type of machine: UCP 600 Vario Year of manufacture: 2007 Control system: Heidenhain iTNC 530 Machine's weight: 7.700 kg Tool holder: HSK-A63 spindel speed: 20.000 1/min x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm Speed range: 20.000 1/min max. Table load: 200 kg Spindle lock: HSK-A63 Max. workpiece weight: 200 kg Operating time: 57.098 h Chip removal device: Ja Cooling system: Ja Spindle operating time: 3.003 h Tailstock: Nein Overall dimensions: 6.820 × 4.800 × 2.810 mm Traverse Z-axis: 450 mm Table dimensions: Ø 450 mm Number of tools in the magazine: 30 Internal coolant supply: Ja Clamping assembly: HSK-A63 Bedpfx Amjzkr Tnoyedf 3D Measuring probe: Ja (Blum) : Ja : Nein

Condition: excellent (used), Year of construction: 2018, operating hours: 15,854 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, workpiece weight (max.): 500 kg, total height: 3,060 mm, total length: 3,075 mm, rotational speed (max.): 12,000 rpm, overall weight: 11,000 kg, spindle nose: SK40, number of slots in tool magazine: 30, chuck outer diameter: 3,325 mm, Equipment: chip conveyor, fume extraction, CNC 5-Axis Machining Center MAZAK Variaxis J600, 2018 You are welcome to inspect the machine in our workshop while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK Variaxis J600 is a powerful vertical 5-axis machining center for the precise and efficient complete machining of complex milling parts. It features a tilting A-axis (-120° to +90°) and a continuously rotating C-axis (±360°), allowing even complex geometries to be completed in a single setup – ideal for general mechanical engineering as well as series and single-part production. Bdsdpszkmaiefx Amyef The robust design with travels of 850 mm in the X-axis, 550 mm in the Y-axis, and 510 mm in the Z-axis offers ample working space. The rotary table with Ø600 × 500 mm can accommodate workpieces with a maximum diameter of approximately 730 mm and a maximum height of 450 mm – with a maximum table load of 500 kg. The distance from the spindle nose to the table surface can be adjusted between 70 and 580 mm, enabling flexible accommodation of various workpiece geometries. The powerful milling spindle with speeds up to 12,000 rpm and the SK40 tool holder (DIN 69871) ensure high cutting performance and precision. The tool magazine (ATC) with 30 tool positions ensures short non-cutting times and flexible machining processes, even for complex manufacturing tasks. The machine is controlled via the modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. Comprehensive features ensure optimal machining conditions: internal coolant supply (IKZ), automatic tool length measurement, synchronous thread drilling, cylindrical interpolation, and the high-speed functions High Speed, Super High Speed, “G00 slope constant,” a KSS mist extraction system from LNS, a chip conveyor from Mayfran, and a Renishaw measuring system. With a machine weight of approximately 11,000 kg and dimensions of 3,075 × 3,325 × 3,060 mm (L × W × H), the model offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile 5-axis machining center that guarantees high precision, performance, and reliability in industrial production. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG

Condition: ready for operation (used), functionality: fully functional, The Stephan VM.MC.600.20 cutter is designed for high-capacity processing facilities that are looking for an efficient solution for chopping, mixing, and emulsifying food products. It ensures homogeneous and controlled processing, which helps maintain consistent quality with high volumes. As a result, recipes remain reproducible, and manufacturing variations are reduced. Furthermore, the Stephan design guarantees high process stability, even in demanding applications. This cutter integrates into structured industrial lines, as its architecture is designed for continuous operation. In addition, the large-volume tank allows for processing significant batches while maintaining high precision. Moreover, the powerful motor ensures effective cutting action, which improves the final texture of the products. Therefore, productivity increases without compromising quality. The stainless steel construction facilitates compliance with hygiene requirements and daily maintenance. As a result, cleaning operations are performed more quickly, and downtime is limited. Furthermore, speed control allows the operation to be adapted to different types of preparations. Consequently, this cutter meets the needs of versatile workshops focused on performance and consistency. Bdsdpfx Aex Hyp Ssmyef Offered as a used unit by Europ’Équipement, the Stephan VM.MC.600.20 cutter is inspected before being put back into service. This ensures that the user has a machine that is ready to be integrated into their production line. Moreover, purchasing used equipment allows for cost control while maintaining a high level of performance. Therefore, this cutter is a relevant choice for securing the industrial process on a large scale. Technical specifications: Tank capacity: 600 L Batch capacity: approximately 150 to 400 kg Dimensions (L × W × H): ≈ 3,200 × 2,400 × 2,800 mm Machine weight: ≈ 3,500 to 4,000 kg Maximum operating temperature: 95 °C Electrical supply: 400 V – three-phase – 50 Hz Motor: high power, multi-speed Year of manufacture: 1994

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Bdjdszkivtspfx Amyof Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 92cm Width: 164cm Height: 150cm Bdsdpfx Amed Tacreyof Electric power: 1.5kW Delivery time: After the payment, from the stock

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Bedpfx Aji Uli Eomysdf

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Bsdpfxswk Nm Io Amyodf

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Bsdpfx Amezdi Ivsyjdf Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Bridgeport VMC 600 22 CNC machining center with Heidenhain TNC 410 / 426 control system -Travel X-axis: 600mm -Travel Y-axis: 410mm -Travel Z-axis: 520mm -Table load capacity: 500 kg -Spindle taper: SK 40 ISO/BT -Spindle power: 8.5 kW -Speed range: 40 to 6000 RPM -Tool changer: 22 positions Bdsdozhg Riepfx Amyof -Number of controlled axes: 3 -Year of manufacture: 2000 -Length: 2800 mm -Width: 2050 mm -Height: 2300 mm -Weight: Approx. 2500 kg

Condition: new, INA x M-rail + V-rail + needle cage SN 42369-134 SET M6535x600 F-325147 87 K1203, unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Bdsdpfxjx Dw D Ss Amyef

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Bsdpforv Ta Rex Amyedf

Condition: new, INA x M-rail + V-rail + needle cage SN 42369-133 SET M6535x600 F-325147 87 K1203, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Bdsdpfx Ameqm Srxjyof

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit, Model 1A, E04809-045-019D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Bjdpfxsi Eca Ie Amyedf

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit, Model 1A, E04809-045-071, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Bsdei Eca Sspfx Amysdf

Condition: ready for operation (used), Bosch 104-914 600 / B2.030.060-00.000 Brushless servomotor, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Bdodpfx Aji D E N Eemyof

Condition: ready for operation (used), Bosch NT 600 power supply, used, in good condition, 100% functional. Bodpfx Aei D Uansmysdf

Condition: used, functionality: fully functional, machine/vehicle number: H2X392J01741, Year of construction: 2018, operating hours: 7,150 h, load capacity: 2,000 kg, lifting height: 3,270 mm, free lift: 1,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,210 mm, fork length: 1,200 mm, empty load weight: 3,635 kg, drive type: Diesel, Diesel forklift Chassis number: H2X392J01741 Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Workshop-inspected with UVV approval Side shifter, Bdsdozgpb Uopfx Amysf 3rd valve, rear work light, front work light, half cabin, CE certificate, interior mirror, windshield wiper, single-pedal operation, 4 headlights in front, 1 headlight in the rear, BlueSpot in the rear, door on the right, flashing beacon

Year of construction: 2009, condition: ready for operation (used), overall weight: 900 kg, number of axes: 2, Optical measurement machine manufactured in 2009. This Zoller Venturion 600/8 features a maximum tool length of 800 mm and a maximum tool diameter of 440 mm. It is equipped with a tool holder for SK50 and SK40. With a maintenance contract in place and annual calibration performed, this machine is in good condition. If you are looking to get high-quality optical measurement capabilities, consider the Zoller Venturion 600/8 machine we have for sale. Contact us for further details. Bdjdpoy A Nxhjfx Amyef • Condition: Good • Maintenance: Annual calibration performed • Maintenance contract: Yes • Operating shifts: 2 • Tool holder: SK50 and SK40 • Max tool length: 800 mm • Max tool diameter: 440 mm • Venturion 600/8 Pilot 3.0 CNC • CNC-Based Joystick Control • Max Tool Length Z = 800 Mm • Max Tool Diameter D = 440 Mm • Measuring Diameter D = 200 Mm • Power Supply 230 V • High Precision Spindle A.C.E. (I) • Runout Accuracy 0.002 Mm • Universal Tool Clamping For Steep Taper/ANSI/CAT/MAS-BT/HSK/Capto/KM • Autofocus System For Venturion 600 • Rotary Encoder For Venturion 600 • Presetter For Shrinking Devices (SK 50) • Presetter For Shrinking Devices (SK 40) • ZOLLER Insert D 78/VSH Size 1 • IPC Electronics 2-Axis Pilot 3.0 CNC Version • Operating System Windows XP • Control Unit Cockpit Pilot 3.0 With 17" TFT Color Display Touchscreen Keyboard Mouse Storage For Labels And • Laser PrinterStandard Functions Pilot 3.0 • Tool Management Standard • Data Output DNC With 3 Selectable Output Formats Included • Output Format Siemens 840D • Output Format Heidenhain TNC (TNC 407/410/415/415B/426/430/530/124) • Automatic Read/Write Station With Height Adjustment • NC1 Read/Write System Software • Automatic Positioning WZI Autofocus And Edge Detection Required • NC1 Drawing System Standard Data Interface • Manual Venturion/Pilot 3.0 • Electrical Connection 230 V 50/60 Hz • Pneumatic Connection 6 Bar • Complies With DIN EN 61010 Safety Standards