Used E Press for sale (31,902)

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Dedpfx Abowttrge Tocr Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Front tire type: Pneumatic Front tire size: 27x10-12 Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this HT5KU. P.S.: Our master workshop specializes in the repair, maintenance, overhaul, and custom manufacturing of forklifts from 8 tons upwards. We can also offer your vehicle for sale with us on consignment. 1x NIVO fork; telescopic forks 1360 / 2360 mm Heater, full cabin, Platform height: 820 mm

Condition: used, functionality: fully functional, KEB F4 frequency inverter. Used condition. Fully functional. 2 units available. Dcodpfexu N Uwex Ab Tsr

Condition: good (used), Year of construction: 1978, functionality: fully functional, pressing force: 2,000 t, table length: 1,650 mm, table width: 2,000 mm, overall weight: 144,500 kg, stroke length: 1,400 mm, Equipment: documentation/manual, 25/11/2025 2000 tons press hydraulic Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Dcodpfx Abow R Ecds Tor Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 144.5 tons YOM: 1986

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm Dcjdpfx Ajvuukneb Tsr capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Metal strip unwinding - wrapping machine for the production of fencing strips. Specification: Model: Clark's press equipment Maximum sheet thickness: 0.5 mm Other: speed is not adjustable Made in: England Available in two units. If you have any further questions, we will be happy to answer them. Djdpfxsqla Uue Ab Tocr

Condition: used, With this offer, you are purchasing a used ‘Xerox Versant 80 Press’ colour production system. Item for sale: 1 x Xerox Versant 80 Press with the following equipment: Includes Fiery Server Pro 80 Includes Paper Deck A-CF01 Includes Booklet Finisher LFN-7 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,178,231 pages Colour: Approx. 840,272 pages Black: Approx. 337,959 pages Condition: Dcedpfx Ajxnx Elsb Tsr This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, machine/vehicle number: 1591, Industrial flatbed heat press COMAS Tipo 85, suitable for sublimation printing, lamination, or thermal transfer on textiles, films, and composite materials. Djdpjxryylsfx Ab Tecr The machine was purchased but never put into operation. It has been stored in a dry environment and is in good physical condition. Equipped with VAHLE KEK 5/60 power feed system (industrial conductor rail). Heavy-duty construction, ideal for workshops or small production facilities needing reliable thermal pressing capacity.

Condition: used, functionality: fully functional, KEB F4 frequency inverter. Used condition. Fully functional. 2 units available. Djdpfxjxu N Uks Ab Tocr

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 25/11/2025 2000 tons press hydraulic Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Dsdpfx Ajw Hridob Tjcr Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 144.5 tons YOM: 1986

Condition: new, Mori Seiki MV 40 E main spindle MV40SPU080ADA01 NEW GM4021244-009 from stock (traces of storage) Please refer to the pictures for further technical information Scope of delivery as shown Auction price is without 19% VAT and invoice The invoice will be enclosed with the shipment. The invoice will be enclosed with the shipment. Cj2Gdlmgos Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. Payment method Paypal bank Pick up by yourself You will receive information about bank details, payment methods, etc. by email Request more information PROVIDER Schneider Technik CNC 74423 Obersontheim, Germany +49 7973 ... show Last online: Last week Registered since: 2018 16 ads online Please call me back Show more SEND INQUIRY EN I am a dealer Receive offers for similar machines Send inquiry Privacy policy TELEPHONE & FAX Dcjdpjuxnwaefx Ab Tjr +49 7973 ... show +49 7973 ... show print view Share Manage advertisement edit

Condition: good (used), Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA Dsdpfx Abow D E Uns Tecr 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Dcodpfxexp Ibxe Ab Tor Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: good (used), Spindle / Spindle 3.5 - 16 - 10 kVA 2750 - 14660 - 23660 rpm Dsdpfx Asp I T Rqsb Tecr Inspection is possible by prior appointment at my warehouse!

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Dedjwd Sh Uepfx Ab Tscr Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Jaws: 250mm x 150mm Up to 30 programmable products

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 5,600 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,500 mm, fork length: 1,400 mm, drive type: Elektro, Electric side loader Load center: 600 Dcjdpfxju Ac Afo Ab Ter Mast type: Standard Technical condition: good Fork positioner, Hydraulic extendable forks 3rd valve, 4th valve,

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm Dcsdpfx Aeh Rkhnsb Tjr YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Djdpsit Rrvefx Ab Tscr

Condition: excellent (used), REF: MM6222 Dsdpfexiw A Sjx Ab Tscr 1 X  J&E Hall Fusion 40ft Chiller/Freezer Container. The J&E Hall Fusion 40ft Container is a high-specification, industrial-grade refrigerated unit designed for flexible, large-volume cold storage and transportation. As a versatile solution, it operates as both a chiller and a freezer, offering exceptional reliability, precise temperature control, and superior energy efficiency. This 40ft unit is built into a standard ISO shipping container frame, making it robust, stackable, and easily transportable globally. It is an ideal asset for logistics, food processing, pharmaceuticals, and any business requiring high-capacity, critical temperature management. Key Features and Benefits Dual Functionality: Operates efficiently as both a chiller (for fresh produce, dairy, etc.) and a deep freezer (for frozen goods) -25 degrees, offering maximum versatility. Fusion Technology: The cooling system is engineered for reliable, uniform air distribution and temperature stability, which is crucial for maintaining product integrity across the entire 40ft length. Robust Construction: Built on an ISO standard frame, ensuring structural integrity and suitability for harsh outdoor conditions and intermodal transport (sea, rail, road). High Capacity: The 40-foot length provides significant volume, making it perfect for bulk storage or large-scale temporary temperature control requirements. Hygienic Interior: Features smooth, non-corrosive internal finishes that facilitate easy cleaning and compliance with food safety standards.

Year of construction: 2013, condition: ready for operation (used), 10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, effective mains current I₁ eff: 18A. They are in good condition. An on-site inspection is possible. Dcedpfx Asxdc U Asb Tor

Condition: used, Pujolas Ham Press Dsdpfx Aswd Nufob Tscr Model PF 4004

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,080 mm, fork length: 1,400 mm, drive type: Elektro, Electric sideloader Load center: 600 Mast type: Standard Dcjdpfxsu Acz Ij Ab Tjr Technical condition: good Battery year of construction: 2021 Description: Battery year 2017 Hydraulic extension forks 1400/2450 mm Fork positioner, Hydraulic extension forks 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, Fork positioner Djdpfjw Sp Dhsx Ab Tscr Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Technical condition: New Description: Brand-new fork positioner, frame width 1,200 mm, opening center/center 270 to 1,120 mm, brackets for standard forks, with sideshift valve.

Year of construction: 2022, operating hours: 2 h, condition: as good as new (ex-display), machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Dcedpfx Abowtc Ane Tsr Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Dodpfsw Sp Dbsx Ab Tecr Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Description: Brand new fork positioner, frame width 1,150 mm, opening center/center 250 to 1,050 mm, brackets for standard forks, with sideshift valve.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Load center: 500 Dedpjw Sp A Rsfx Ab Tscr ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Description: Brand new fork positioner, build width 1,050 mm, opening center-to-center 250 to 950 mm, brackets for standard forks, with sideshift valve.