Used E Press for sale (31,776)

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Knsdpfx Aotx E Rqofioc Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Knodpfxju Dal Ho Afiec

Condition: excellent (used), safe to handle, with new UVV test: Power 50 to lifting speed 115 /min throat depth 250 mm ram stroke 8 - 120 mm ram adjustment approx. 70 mm Kjdpfxjw Dqfrj Afionc , Table, WxD approx. 650 x 500 mm Drop-through hole approx. 250 x 180 mm Max. Max. installation height approx. 380 mm . .

Condition: new, Year of construction: 2024, Further variants on request - 4 tiers - clamping depth 1050 mm - 2 pressure beams -1200 mm long, 60 mm high, per tier - 2 straight, infinitely adjustable counter bearings, 1200 mm long, per tier - 6 hold-downs with handwheel, per tier - 6 support arms, per shelf - all support arms with plastic supports (glue-repellent) Knodpfx Afegqu Aleioc - maximum pressing length 2600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: excellent (used), Year of construction: 2003, operating hours: 500 h, functionality: fully functional, machine/vehicle number: BV26E.257, installation height: 920 mm, table width: 980 mm, table length: 850 mm, table load: 4,000 kg, overall weight: 3,600 kg, stroke length: 620 mm, pressing force: 30 t, Hardly used, in excellent condition. Kjdjw Av Hxjpfx Afionc

Condition: good (used), Year of construction: 2009, functionality: fully functional, Weight 4950 kg, total weight 12000 kg Kjdpfswpmckex Afisnc 5.5 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, distance between stands: 3,400 mm, pressing force: 400 t, working length: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Bending length: 4,050 mm Width between columns: 3,400 mm Speed: 37.5 rpm Motor power: 37 kW Kjdpfx Aewd Nguefionc Axes and control system Axes: Y1 / Y2, X, R Crowning: CNC-controlled Backgauge: CNC-controlled Crowning device: Motor-adjustable via CNC control system Tooling Upper tool: 1010/A/75°, split offset Die: Multi-V die MACHINE DETAILS Dimensions (L × W × H): 5,750 × 2,110 × 3,440 mm Weight: approx. 25,000 kg Safety and handling equipment Laser protection device: on the upper beam Sheet metal support arms: 2 units on linear guides EQUIPMENT - CNC-controlled crowning - CNC backgauge - 2 sheet support arms on linear guides - Laser protection device on the upper beam - Offset, split upper tool - Multi-V die - Y1/Y2, X, and R-axis control - Operating instructions

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS pressure: 160 t folding length: 4100 mm column width: 3100 mm Control: DELEM DA66W table width: 120 mm Stroke: max. 800 mm Speed downwards: 80 mm/sec Speed upwards: 80 mm/sec Speed under load: 8 mm/sec Kjdpjlp Iq Rofx Afijnc MACHINE DETAILS oil capacity: 185 l total power requirement: 24 kW machine weight: approx. 13 t space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Knodpeimdx Tofx Afisc Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, working width: 3,060 mm, distance between stands: 3,060 mm, total width: 3,100 mm, pressing force: 100 t, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS Available with WILA or AMADA tooling system Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. Knodpfjv Edu Dox Afiec - Servo-electric drive - 100 T pressure - 3060 mm bending length - 300 mm stroke - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - rear stop controlled in 4 CNC axes - X / R / Z1 / Z2 - 2D graphic control - EC20 model - light curtain - programmable - WILA tooling system - upper clamp or AMADA - (to choose) - WILA tooling system - lower clamp possible 4V / 2V / 1V / T-type matrices with a base of 60 mm - lower table compensation

Condition: used, Year of construction: 1989, pressure 20 t total power requirement 20 kW weight of the machine ca. 5 t Knjdpfsvr Hkzsx Afioc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5276678, ram adjustment: 70 mm, stroke adjustment: 100 mm, pressing force: 35 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Nominal force: 35 t Stroke adjustment: 8 - 100 mm Ram adjustment: 70 mm Stroke rate: 130 / min Motor power: 3 HP Knsdswhdh Iepfx Afisc Other auctions from the same location: Further information according to the manufacturer - no guarantees given Ram surface: approx. 350 x 180 mm Space required: approx. 1.0 x 1.6 x 2.3 m

Year of construction: 1962, condition: used, pressure 10 t throat 170 mm stroke 6-60 mm no. of strokes 160 Hub/min ram - range of adjustment 40 mm table surface area 420x320 mm ram surface 180x140 mm hole in the table Ø 120 mm table height 850 mm tool hole in ram Ø 32 mm weight of the machine ca. 1 t dimensions of the machine ca. 1200x1200x1900 mm Kjdelp U Nbopfx Afijnc

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Knodpfx Aoxl Dz Tjfijc Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Kjdpjvcmirofx Afienc Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: used, Hydraulic operation via foot switch Profile height max. 120 mm Abutment stroke 100 mm Punching stroke 50 mm Press force 38 kN Ksdpfx Afjw U Slgeisnc Engine power: 3 kW Weight approx. 500 kg

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding fume extractor, extractor fan, pressure fan, vacuum fan -Motor power: 0.12 KW -Speed: 2780 rpm -Volume output: 252 m³/h -Pressure increase: 240 PA Kjdpfx Ajd D Ri Nofienc -Connection input: Ø 142 mm -Connection output: 56 x 52 mm -Number: 1x fan available -Price: per piece -Dimensions: 270/180/H160 mm -Weight: 4.8 kg

Condition: used, Year of construction: 2015, total width: 1,800 mm, total length: 3,600 mm, total height: 2,100 mm, Empty weight: 3.750 kg Veneer press Steton P 70 E Year of construction 2015 Press size 3100x1300mm Opening 450mm Knodjwnh R Tjpfx Afiec Number of cylinders 6pcs. Cylinder diameter 70mm Electric heating 19.6kW, max. 120 degrees Max. pressing pressure 70 tons Pressure 2 KG/cm² Dimensions. 3600 x 1730 x 2060mm, weight 3750kg - Year: 2015 - Documentation available: Yes - Transport dimensions: 3600mm x 1800mm x 2100mm (l x w x h) - Transport weight [kg]: 3750kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), operating hours: 4,251 h, functionality: fully functional, machine/vehicle number: G40800101, operating pressure: 2,000 bar, Listing: Falch Wheel Jet 30 2000-8-0-e – High-Pressure Cleaner Technical specifications: Model: Falch Wheel Jet 30 2000-8-0-e Year of manufacture: not specified (comprehensively overhauled by Falch in 11/2022) Operating hours: 4,251 h (only 25 h in current operation since overhaul) Condition: as-new, inspected & immediately ready for use Drive: Electric, 30 kW Pressure range: 50 – 2,000 bar Flow rate: 4 – 8 l/min Sound level: approx. 86 dB (LpA), 103 dB (LwA) Dimensions: approx. 1,273 × 987 × 1,066 mm Operating voltage: 460 V, 63 A Cold water operation, mobile design Scope of delivery: - High-pressure unit Falch Wheel Jet 30 2000-8-0-e - Accessories (lance, gun, hose package, etc.) Kodpfx Afowynu Nsienc - Operating manual / documentation (upon request) Special features: - Directly from certified specialist dealer - Original Falch factory overhaul (11/2022) - Only 25 operating hours under our ownership - Ideal for industrial applications, paint removal, concrete removal, etc. - Condition close to new, immediately available

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood Knjdoud H Tnspfx Afiec - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Kjdegw Dqpepfx Afijnc Delivery volume 4760 l min 9 bar operating pressure KW 30

Condition: excellent (used), Year of construction: 2018, KAESER DC169E Dryer Capacity: 16.88 m3/min Year of manufacture: 2018 Kodpfsw Nh Akex Afionc The dryer is fully operational; service provided. Net price: 8,200 PLN Gross price: 10,086 PLN

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 100 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HDS 801 E HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long, trouble-free operation. A highly efficient three-phase motor ensures stable operation even after prolonged use. With operating parameters of 150 bar and 740 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Fully electric water heating allows for operation in areas where exhaust emissions are prohibited. Each device we offer is individually photographed; you're buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 740 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 85 Heater power [kW]: 24 Connection power [kW]: 29.6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW durable pressure gun from the German brand R+M Kjdpfjw I Dacex Afisnc NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine User-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Year of construction: 1989, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Knedpsval Smefx Afioc -Manufacturer: Piller, radial fan double -Type: 2 E 10 1800 -Engine power: 11 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 62 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 1150/890/H1280 mm -Weight: 410 kg

Year of construction: 2021, condition: used, Exhibition compressor Year of manufacture 2021 Suction capacity approx. 105 l/min. Number of cylinders 2 Compressor speed 1450 rpm Maximum pressure 8 bar Knedpfx Aekwhwhofioc Filling capacity approx. 54 l/min. Tank capacity 6 l Scahll power level Lw 59 dB(A) Weight approx. 15.5 kg availability: short term storage location: Hochheim