Used E Press for sale (77,356)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Redpfxjzk Eqmo Ahcecf Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: A92W021000486, color channels: 4, resolution (max.): 1,200 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (max.): 330 mm, paper height (max.): 1,300 mm, number of feeding trays: 3, counter reading (black): 283,179, counter reading (color): 4,825,446, type of input current: three-phase, input current: 25 A, input voltage: 230 V, Equipment: auto duplex, documentation/manual, Konica Minolta AccurioPress C6100 digital printing system, manufactured in 2018, in well-maintained condition. The machine is fully functional and currently in production-ready condition. All maintenance has been performed regularly by the service partner Faber. Rodpfx Ahjziz Eqjcecf From a non-smoking environment. Equipment: - Fiery IC-315H controller - IQ-501 Intelligent Quality Optimizer - PF-707m large-capacity paper feeder with 3 trays - RU-518 relay unit - FS-532 finisher - LS-506 large-capacity stacker - Duplex printing - Print resolution up to 1,200 dpi - Paper weights from 52 to 400 g/m² Counter readings as shown in the photo: - Total counter: 5,108,625 - Full-color counter: 4,825,446 - Black and white counter: 283,179 - Printer total counter: 5,095,930 For sale due to insufficient utilization, as a second machine is also in use. The machine can be inspected and tested in Düsseldorf by appointment. Product photos and videos are available. For sale to commercial buyers only. Disassembly, collection, and transport are the responsibility of the buyer. Payment required before loading.

Condition: used, machine/vehicle number: ...98, mileage: 670,481 km, power: 340 kW (462.27 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, air conditioning, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, low noise, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, traction control, DAF XF 460 FT *SuperSpaceCab* Euro6 - INTARDER - STAND-UP AIR CONDITIONING - FULL SPOILER with SIDE FAIRING - - PTO (Power Take-Off) - COMPRESSOR PREPARATION * Vehicle had a DAF MAINTENANCE CONTRACT * Equipment: - PTO - COMPRESSOR PREPARATION - SlimCool STAND-UP AIR CONDITIONING SYSTEM - ZF-INTARDER - SIDE FAIRING - Luxury Air driver's seat - Seat heating - ATC air conditioning system - DPA Driver Performance Assistant - Axle load monitoring SAFETY ASSISTANCE ACC Adaptive Cruise Control FCW Forward Collision Warning/Distance Cruise Control AEBS Extended Emergency Braking System Lane Change Warning System - Euro6 - Automatic transmission - ZF-Intarder - Super-Space-Cab cab - 2 beds - DAF original REFRIGERATOR - ATC air conditioning system - Auxiliary heater - On-board computer - Cruise control - Central locking Rcsdek R U Umjpfx Ahcsf - Additional headlights/high beam/wide beam - Differential lock - Aluminum tank - Front tire size: 385/65R22.5 - Rear tire size: 315/80R22.5 - etc. ..... + SILO COMPRESSOR available upon request for an extra charge! Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will take care of all customs matters for you. What to do with your used vehicle? We will gladly accept it as part of a trade-in. For export outside the EU, the statutory VAT must be deposited as a security. This offer is non-binding and subject to change. Errors and prior sale are reserved.

Condition: new, Mori Seiki MV 40 E main spindle MV40SPU080ADA01 NEW GM4021244-009 from stock (traces of storage) Please refer to the pictures for further technical information Scope of delivery as shown Rcsdeuxnwaspfx Ahcof Auction price is without 19% VAT and invoice The invoice will be enclosed with the shipment. The invoice will be enclosed with the shipment. Cj2Gdlmgos Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. Payment method Paypal bank Pick up by yourself You will receive information about bank details, payment methods, etc. by email Request more information PROVIDER Schneider Technik CNC 74423 Obersontheim, Germany +49 7973 ... show Last online: Last week Registered since: 2018 16 ads online Please call me back Show more SEND INQUIRY EN I am a dealer Receive offers for similar machines Send inquiry Privacy policy TELEPHONE & FAX +49 7973 ... show +49 7973 ... show print view Share Manage advertisement edit

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm Rcjdpfxowqr R As Ahcof External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, mileage: 261,500 km, power: 390 kW (530.25 HP), first registration: 05/2022, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale are subject to change. No liability for printing and typographical errors. Sale is made with the exclusion of statutory warranty. Redpfx Ahsxl Nghococf

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Redpfsyk Tuuox Ahcscf Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Rcjdpfx Ahoxrb Nbjcof Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t Rcedjfxyigepfx Ahcjf distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Year of construction: 2020, condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Rsdpfxjxg Ux Ee Ahcocf Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2019, machine/vehicle number: DF0362, pressing force: 250 t, pressure:250 t passage width:1800 mm stroke:600 mm total power requirement:22 kW weight of the machine ca.:24 t dimensions:ca. 3390 x 3400 x 3800 mm column diameter:160 mm return capacity:25 t max. working heidht:800 mm Table dimensions:1800 x 1600 mm :2350 x 1600 mm table height over floor:900 mm hydraulic table shift:25 mm/sec table load:5 t pre-running speed:10 mm/sec pressure speed:10 Return Speed:25 mm/sec speed rapid traverse:10 mm/sec :600 l Oil cooling (electric):1,5 kW (max) Rsdpfxefxyino Ahcjcf :46er / 10 my Monitor SIEMENS:10 Zoll

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Rcsdeh Agnujpfx Ahcjf Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 135 t, It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm Rodpeigg E Hefx Ahcocf weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar Rjdpfxjfhmuve Ahcjcf closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Rsdjfhcc Ujpfx Ahcscf Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, table width: 600 mm, table length: 600 mm, total length: 1,869 mm, total width: 850 mm, total height: 2,620 mm, overall weight: 2,900 kg, Hidrobrasil Single-Column Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a hydraulic single-column press (C-frame type) manufactured by Hidrobrasil, featuring 30 t pressing force and a compact design. The machine is equipped with a table size of 600 × 600 mm, making it ideal for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. ==== Technical Data & Information: Hydraulic Single-Column Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Design: C-frame press - Machine type: Assembly press - Pressing force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downward speed: 10 mm/sec - Upward speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Rcodpfx Ahjvhcykecef Assembly operations, press-fitting operations, straightening work, workshop applications, small series production Hydraulic press, single-column press, C-frame press, assembly press, industrial press

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm Rodpefhcc Hefx Ahcocf motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) Rodpfx Ahex Ik D Aocecf - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: used, mileage: 26,450 km, power: 96 kW (130.52 HP), first registration: 02/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,785 mm, loading space length: 3,395 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1365. RS05812 ----EQUIPMENT - 2 batteries - Airline ceiling rail with LED - Tow bar, electrical pre-installation kit - 256° twin rear doors, without windows - Load compartment floor – wood - Package: Technology Package 6P - Exterior mirrors electrically adjustable, heated and automatically folding - Blind spot assist including Cross Traffic Alert - Audio system 3 incl. navigation - Fog lights - LED downlight Pre-Collision Assist, camera and radar based - Rear emergency braking assist - Lane keeping assist with lane departure warning - Advanced traffic sign recognition system - Front and rear Park Pilot system - Adaptive cruise control - 360-degree camera - Reversing warning signal - SVO: Express Line Package - Headlights with static cornering lights - Front mud flaps - Side wall panelling up to roof height - 12-volt socket in load compartment - Digital tachograph – pre-installation - Partition wall (metal) - Central locking with remote control - Transmission: 6-speed manual - ABS, EBD and DRIVER ASSIST - Driver airbag - Exterior mirrors electrically adjustable and heated - Battery: Extended battery life - On-board computer - High roof - Headliner in driver’s cab - Twin rear doors/180° (without windows) - Tachometer - Third brake light - Electric front windows - Electronic parking brake - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delay function - Automatic climate control - 70L fuel tank - Paintwork: Solid colour - Load compartment lighting - Emergency call assistant - Package: Technology Package 2 - Particulate filter: Diesel particulate filter - Radio: 12" multi-function display & Ford SYNC 4 - Tire pressure monitoring system - Windscreen wipers with rain sensor - Sliding door: sliding door, right - Rear mud flaps - Side protective strips - Power steering - Seat belts - Seats: Seat Package 18A - Start-stop system - Front bumper - Partition wall (plastic) at B-pillar height - Rear entry step - Recirculation control - Lashing eyes - Immobilizer - Tinted heat-insulating glazing - Central locking with remote control - Overhead storage compartment in the front ... and much more. ----Vehicle is in unprepared condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. Rcodpfszp Awusx Ahcjf We are happy to accept your vehicle as a trade-in. Financing / leasing possible even without down payment! Do you have any questions? We will be glad to advise you!

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications Redpezbqk Uofx Ahcjcf • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Rodpszq Tz Tefx Ahcecf Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Rcsdpfx Ajx A A E Ejhcsf Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Clamping unit Clamping force: 3500 kN Rodjziukgepfx Ahcjcf Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Rsdpfx Aozdgnbjhcecf Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland. Rjdpeq Ru Amofx Ahcecf