Used Dry Stove for sale (2,640)

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm Fgedpfx Alszv Tdxebjg - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm Fgjdpozv Tchjfx Albsg - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2013, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A Fgjdpezv Tb Rsfx Albeg - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 260 mm, total length: 420 mm, total height: 390 mm, air demand: 1.5 m³/h, overall weight: 17 kg, pressure: 10 bar, warranty duration: 12 months, We offer the Schimmel Mini-S dry ice blasting machine. Blasting media: Dry ice pellets: 1.5mm - 2.2mm Dry ice hopper capacity: 3.5 kg Dry ice consumption: 6-25 kg/h Inlet air pressure: max. 10 bar Inlet air volume: 500 - 1500 l/min Power supply: pneumatic (compressed air only) Pressure regulation: Yes Air volume regulation: Yes Fjdpfezxq T Njx Albsgg Delivery time: 3-4 weeks Warranty: 1 year Shipping: Not included in the price

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 400 mm, total length: 640 mm, total height: 990 mm, air demand: 4 m³/h, overall weight: 68 kg, pressure: 10 bar, input voltage: 220 V, warranty duration: 12 months, operating pressure: 10 bar, input current: 2 A, hopper volume: 20 l, We offer this new HORECO2 Ares 50ZT dry ice blasting machine, manufactured in 2026. Model: Ares 50ZT Blasting medium: dry ice pellets, 1.6mm - 3mm Dry ice hopper capacity: 20 kg Dry ice consumption: 0-72 kg/h Required air inlet flow: 2-4 m3/min Required air inlet pressure: 5-10 bar - The blasting machine includes an internal air system. - The blasting machine includes a system for emptying residual ice. Power: 0.5 kW Current: 2.5 A Voltage: 220 V Frequency: 50 Hz Weight: 68 kg Dimensions: 640x400x990 mm Fgsdpfx Aozxpf Dslbog Included in the package: - Air hose, 8m (3/4'') - Blasting hose, 6m (3/4'') Delivery time: 3-4 weeks Shipping costs are not included in the price! If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2015, operating hours: 355 h, Cold Jet Aero 75 DX Machine We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including both small and very large projects. An advantage of this machine is that it does not rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, complete with the following equipment: COLD JET AERO 75 DX DRY ICE (335 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator Fodpjzkq N Iefx Albegg 2 x Nozzles (NEW) This is one of the best machines in the world. It has no electronics, which is why it is reliable and not expensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance services for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) Fjdjydpy Topfx Albjgg With this machine, you can also use loose 3mm pellets! And, of course, blocks. As good as new, 1-year warranty. Includes hoses and nozzle. We have various new parts in stock for Cold Jet machines. The COLD JET machine is suitable for industrial cleaning, both small and very large projects. The advantage of this machine is that it doesn't use new-generation electronics. It is one of the most aggressive machines on the market. This machine is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Blasting complete with the following equipment: COLD JET i3 Microclean (47 HOURS OF USE) 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle One of the best machines in the world. No electronics. That’s why it’s reliable. And it’s inexpensive to maintain. For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance are available for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including small and very large projects. One advantage of this machine is that it doesn’t rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: Fgsdpfx Alewg R Rmobjg COLDJET AERO 30 DRY ICE (151 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Cold Jet Applicator 2 x Nozzles – NEW One of the best machines in the world. It has no electronics, which is why it is so reliable. Furthermore, maintenance costs are relatively low. For inquiries or to arrange a viewing, please contact us at Dr. Dryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, ASCO C500 Parts. We have various parts for these machines, both new and used. Fjdpfx Ajzv Idmslbegg Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. New price: €35,000. Excludes applicator nozzles and hoses. This machine is suitable for industrial cleaning, including large-scale projects. An advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Fgjdpfx Aljznnyxobsg Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose 1 x Coldjet applicator 2 x nozzles We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which makes it reliable and cost-effective to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance of Cold Jet machines are also available. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Cold Jet Foot Switch Microclean Series. Eliminates the need for a handheld control switch. Allows the nozzle to be attached directly to the blasting hose for improved ergonomics. Fgjdpfx Alozv Hx Nobsg “Deadman style” safety foot pedal. We have various new parts in stock for Cold Jet machines.

Condition: new, Cold Jet Foot Switch Fodpfszv Hx Aox Albogg Eliminates the need for a handheld control switch. Allows the nozzle to be attached directly to the blast hose for improved ergonomics. “Deadman” style safety foot pedal. We have various new parts in stock for Cold Jet machines.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 Fedpfx Asp S Tlhjlbjgg The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Laboratory drying oven, heating cabinet, and incubator Shelves adjustable in height at multiple levels Fsdpjyk Emisfx Albogg Several shelf inserts available Temperature range: 0-250 °C Internal dimensions LxWxH: 500 x 500 x 480 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3514, functionality: fully functional, power: 25 kW (33.99 HP), input voltage: 400 V, total length: 5,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 3,000 kg, KOCH CKT-300 Granulate Drying System - including piping and 6 associated containers Note: The item must be picked up on a fixed date between September 1st and September 3rd, 2026; the exact date will be confirmed. Fedpfozvl H Sex Albegg FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, CARRIER 09VE 1064 WATER DRY COOLER – YEAR 2025 Industrial Carrier dry cooler featuring a V-shaped coil, two independent water circuits and axial fans. Supplied with a steel support frame, electrical control panel and DN 65 hydraulic connections. TECHNICAL DATA Manufacturer: Carrier Model: 09VE 1064 UI 1270A9B 12A1V1 CU Product reference: 7416018.702174 Serial number: 04136261/0001 Year of manufacture: 2025 Working fluid: Water Number of circuits: 2 Volume per circuit: 120 litres Fgjdpfozvf Ebsx Albeg Maximum working pressure: 13 bar Maximum temperature: 110 °C Hydraulic connections: DN 65 Power supply: 400 V / 3-phase + N / 50 Hz Electrical power input: 35 kW Rated current: 46.8 A Weight: 1,340 kg PED: 2014/68/EU PED classification: Article 4.3, Group 2 liquid Certifications: CE, UKCA and EAC The unit is installed outdoors and available for inspection. The scope of supply includes the dry cooler and its electrical control panel.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Fgjdpfxozunvaj Albsg Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: used, IL 2 control unit for ILSA Multimatic. Fgodpfx Alsy Uv Uaobsg

Condition: used, Year of construction: 2021, - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Final moisture content: 10 +/- 2% Drying chamber Manufacturer: BigonDry Type: Mod.LEM96.73.41 Year of manufacture: 2021 Technical data - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Overall chamber dimensions: 10.2x7.5x5.4 m - Type of hardwood - Final moisture content: 10 +/- 2% - Drying package: 4.5x1.2x1.2 m - Substructure: Aluminum - Wall insulation: Aluminum cassettes plus 100 mm glass wool - Sliding door: Aluminum plus 100 mm mineral wool - Front unloading - Ventilation: 900 mm - Ventilation power: 3 kW - Nominal air volume: 36000 m3/h - Hot water temperature: 90-95 C - Heating capacity: 380000-190000 kcal/h - Roof fans: 2+2 - Spray water pressure: 80 bar - Intermediate ceiling: Aluminum - Inspection doors Fedpfx Aszu Amaelbjgg - Wind resistance: 110 km/h - Snow load: 200 kg/m2 - Control system: Fully automatic control unit VENUS 2500-24F-PRO - Noise level: 68-70 dBA - Digital sensors - Total power: 18.5 kW - Power supply: 400v/50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Fgjdpfjw Ttxfjx Albjg Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 3,000 mm, space requirement length: 3,000 mm, space requirement height: 18,000 mm, Solex cooler conditioner dryer Height: 18 meters, entirely made of stainless steel 316, designed for cooling, drying, and conditioning granules of food, fertilizer, or plastics. Capacity: 18 tons per hour. Fgjdpfjxw D Nhox Albsg

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, 12 months warranty, in-stock item, new unit -Model on wheels -Maximum temperature: 300 °C -Oven chamber volume: 1050 liters -External dimensions: 1470 x 970 x 1920 mm (W x D x H) -Oven chamber dimensions: 1200 x 670 x 1400 mm (W x D x H) -Controller B510 (5 programs, each with 4 steps), also available with C550 (10 programs, each with 20 segments) -Horizontal, forced air circulation results in a temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with closed exhaust flap) -Permissible batch weight: 250 kg with distributed load Fjdpfx Asiqkr Islbegg -Load per grid shelf: 30 kg with distributed load -Reinforced floors and rails for 80 kg distributed load available upon request -Grid shelves included: 4 pcs -Maximum number of grid shelves: 14 pcs, available for short-term delivery -Connection power: max. 9.3 kW -Fan capacity: approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Weight: 450 kg -Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg The oven is not to be used for materials containing solvents or for heating food, animals, wood, grain, etc. Oven, industrial oven, heating cabinet, heating oven, laboratory oven, drying oven, temperature oven, testing cabinet

Condition: new, Year of construction: 2026, CORMAK DI329 – Compact Dry Ice Cleaning Machine The CORMAK DI329 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI329 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–5.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI329 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI329 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI329 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Fgodpfxszwfu Ss Albsg Technical Specifications Technical specification Value Power < 1100 W Power supply 230 V AC, 50 Hz Air consumption 1.0–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–3.2 kg/min (adjustable) Dry ice hopper capacity 7.5 kg Weight 65 kg Dry ice pellet size 3.0–5.0 mm Drive system Direct drive Machine dimensions (L × W × H) 670 × 460 × 900 mm

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, Fgjdpfxozwfuls Albeg effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: good (used), SAT heating cabinet, oven, drying cabinet, up to 185 °C Fgjdezwddrspfx Albog Interior dimensions: depth 1.75 m, width 2.10 m, height 2.28 m.