Used Drilling Frame for sale (13,293)

Condition: good (used), Year of construction: 2000, Hettich Blue Max 8 hardware drilling machine Make Hettich Type Blue Max 8 FS Number of spindles in row 5 pieces Press-in die Workpiece clamping cylinder 2 x pneumatic Pneumatic drilling feed Stop rulers Pendulum stops Foot control Space requirement approx. 1200 mm x 700 mm x 1500 mm Weight approx. 150 kg Crodjr Igt Depfx Ab Tek Some drill bits included The stops cannot be seen in the photos, but are included Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 22 mm throat 180 mm bore stroke 120 mm total power requirement 0,75 kW weight of the machine ca. 70 kg Features: Crsdpfx Aoxyln Djb Tok V-belt drive via aluminum pulleys Safety switch according to IP 54 Drilling depth stop Drilling table ± 45° tiltable Height-adjustable drilling table via rack and pinion with diagonal T-slots and surrounding cooling water channel 400 V version

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm Crsdpfxjxyf E No Ab Tsk • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21850 Specifications: 2020 model 4908 Hours (I want a little) 1602 Stroke hours (I want a little) Chassis (see pictures) About 14000 kg Winch Remote control Rod shifter Carousel Services performed continuously Vacuum cleaner Light Protective cage Pendant on base Support paws Ready for delivery Cedpfx Aoxydkkjb Terk   Description: We have a 2020 Atlas Epiroc T30 drilling rig for sale. The rig has recently had service and maintenance. Everything works as it should according to the owner. The number of hours will increase slightly as the rig is in weekly operation. Ready for delivery Own weight: 14000 Engine hours: 4908

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm Cjdpfjwid Uwjx Ab Tork dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: reconditioned (used), Year of construction: 1992, With VE 320 electronic Year of manufacture: 1992 Drilling capacity in steel: 32 mm Cedjxc Iw Hepfx Ab Terk Thread cutting device Mechanical feed infinitely variable via potentiometer Clamping surface table: 500 mm x 360 mm Drilling depth adjustment with digital display Protective device Drilling depth: 150 mm Spindle taper: MK 3 Spindle speeds 140 rpm – 1400 rpm stepless with digital display Drill table illumination

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Cedpfx Abed Hx Uqj Tjrk

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Csdpfxeq Rdqnj Ab Tjrk

Condition: new, Special offer price €7,700 instead of €9,500, excl. VAT. Cjdpfx Absw A Ac He Terk - Drill head is 360° swiveling around the column and height adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made of fiber-reinforced steel ensure high efficiency, low noise levels, long service life, and virtually maintenance-free operation - Spindle made of steel – adjustable tapered roller bearings (ball bearing design) guarantee optimal tool concentricity - Adjustable spindle return spring – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox features automatic overload protection and can also be manually disengaged) - Electromagnetic feed and automatic tapping device (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height adjustable and 360° swiveling around the column - Drill column made of steel – guarantees long-term machine stability as well as high precision and angular accuracy between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release, and emergency stop switch Optional equipment: - LED work light - Tool set for MT4 - Machine vice, 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4 / MT3 - Reducing sleeve MT4 / MT2 - Reducing sleeve MT4 / MT1 - Automatic tapping device - Complete coolant system - Swivel device for table 400 x 500 mm - Foot-operated spindle motor on/off switch - Spindle nose with thread for tool holder - Lower spindle speeds 60 – 980 rpm - Higher spindle speeds 180 – 3,000 rpm - Handwheel cross handle with 3 levers - Cross table FB102, 584 x 242 mm, longitudinal travel 415 mm, cross travel 155 mm - Milling chuck ER, MT4, 5, collet sizes 6, 8, 10, 12, and 20 mm - Drill chuck 0 – 13 mm with arbor MT4 - Drill chuck 3 – 16 mm with arbor MT4 - Special paint finish Technical specifications: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M24 / M28 - Spindle taper: MT4 - Spindle speed: 90 – 1,500 rpm - Gear steps: 8 - Max. distance spindle/table: 830 mm - Max. distance spindle/base plate: 1,210 mm - Throat depth: 330 mm - Table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 2,120 x 750 mm - Weight: 310 kg

Year of construction: 2012, condition: used, Used machine Year of manufacture: 2012 Equipment and technical data: Crodpfx Absxya Rge Tjk Axes: X-axis: - Max. workpiece length: unlimited - Min. workpiece length: 250 mm - Traverse speed: 0-25 m/min Y-axis: - Max. workpiece width: 1,000 mm - Min. workpiece width: 80 mm - Traverse speed: 0-50 m/min Z-axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 10 mm - Traverse speed: 0-20 m/min Minimum and maximum workpiece sizes depend on the weight and on the length-to-width ratio! Units: 16-fold drilling head: - Vertical spindles in X direction: 5 pcs. - Vertical spindles in Y direction: 5 pcs. - Horizontal double drilling spindle in X direction: 2+2 pcs. - Horizontal double drilling spindle in Y direction: 1+1 pcs. - Spindle spacing: 32 mm - Spindle speed: 4,000 rpm - Motor: 1.7 kW Grooving saw: - In X direction - Speed: 4,000 rpm - Max. saw blade diameter: 125 mm - Motor: 1.7 kW (Grooving saw is integrated in drilling head) Milling unit: - Speed: 1,000 to 18,000 rpm - Motor (frequency-controlled): 3.3 kW - Collet chuck: max. 25 mm - Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Extraction: - Volume: 2,000 m³/h - Air velocity: 25 - 30 m/sec - Extraction nozzle: 1 x 150 mm Software: MASTERWORK-MACHINE VERSION Required air pressure: 8 bar Air consumption: max. 750 l/min Air tables in the working area Roller table at infeed and outfeed Additional foldable roller table at infeed Panel measuring sensor Ball screw spindle and linear guides Rack and pinion drive Central lubrication DXF file import Dimensions: 1,990 x 2,410 x 1,510 mm Weight: 1,300 kg Availability: short-term Location: Röllbach

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm Crjdpfjwid Auex Ab Tek distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 Crjdpfsq Ulucjx Ab Tek With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Crjdpfxjvvi I Rj Ab Tsk

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 40 mm throat 230 mm bore stroke 130 mm taper MK 4 MK table-size 400 x 315 mm turning speeds 105 - 1257 U/min total power requirement 2,55 KW weight of the machine ca. 0,35 t Cjdpfx Absxz Hg Rs Tsrk dimensions 0,8 x 0,6 x 1,95 m

Condition: new, Special price €2,800 instead of €3,340 excl. VAT - Precise drilling depth adjustment - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Spindle stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle mount: MT3 - Spindle speed: 129 - 1498 rpm - Gear ratios: 4 - Max. spindle/table distance: 730 mm - Throat depth: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions W x H x D: 500 x 1720 x 500 mm - Weight: 185 kg Cedpfou Tq Stox Ab Tork

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, The machine is in very good technical condition, connected and available for testing. Control system: Heidenhain iTNC 530. Accessories: tools, clamping angles, workpiece probe. Crjdpfx Ajxz E N Djb Tjk

Condition: excellent (used), Year of construction: 2016, operating hours: 40,000 h, functionality: fully functional, Technical data: 3 x drilling spindles Boring method: BTA Minimum drilling diameter: 18 mm Maximum drilling diameter: 30 mm Maximum drilling depth: 1800 mm Rotating tailstock, hydraulic with counter-rotation, stroke 45-50 mm Spindle distance: 210 mm Feed rate: 1-4000 mm/min Position display with 1-axis PLC deep hole drilling control and monitoring Gear motor with holding brake for counter-rotation of workpieces, 160 rpm Chip conveyor Oil trough with extraction pump Crsdpfx Aboxyarwj Tsk

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Cjdpfsxc It Iox Ab Terk Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Csdpfx Aewkir Dob Tork Storage location: Nattheim

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 25 mm throat 270 mm bore stroke 130 mm Csdpfjxz Hgwox Ab Tork taper MK 3 MK table-size 500 x 350 mm turning speeds 100 - 2750 U/min connected load frequency 400 V total power requirement 1,1 KW weight of the machine ca. 0,22 t dimensions 0,8 x 0,6 x 1,8 m

Condition: new, Special offer €5,250 instead of €5,850 excl. VAT Solberga SE2035 – Geared Pillar Drill - Drill head can be swivelled 360° around the column and height-adjusted - Gearbox built with traditional and proven technology for maximum torque – helical-toothed gears made from fibre-reinforced steel offer high efficiency, low noise levels, a long service life and an almost maintenance-free gearbox - Spindle made of steel – optimised tool concentricity thanks to adjustable tapered roller bearings - Adjustable return spring for the spindle – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox is equipped with automatic overload protection and can also be disengaged manually) - Electromagnetic feed and automatic tapping function (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height-adjustable and 360° swivelling around the column - Drill column made of steel – guarantees permanent machine stability as well as maximum precision and squareness between drill bit and table Crjdpfx Abjuzhx Ao Tek - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release and emergency stop switch Optional equipment - LED work light - Tool kit for MK4 - Machine vice 150 mm jaw width - 2 x T-slot nuts - Drill chuck 1 – 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant system - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool mounting - Cross table FB102 584x242 mm, longitudinal movement 415 mm, cross movement 155 mm - Drill chuck 0 – 13 mm with arbor MK4 - Drill chuck 3 – 16 mm with arbor MK4 - Special paint finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (Steel / Cast iron): M 18 / M 22 - Spindle taper: MK4 - Spindle speed: 85 – 3160 rpm - Number of speeds: 8 - Max. distance spindle/table: 820 mm - Max. distance spindle/base plate: 1150 mm - Throat: 320 mm - Table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 1785 x 700 mm - Weight: 290 kg

Condition: used, Year of construction: 2006, functionality: fully functional, Refurbished, repainted glass drilling machine. Tested together with Bentele manufacturer. Currently disassembled and stored in the warehouse. Crjdpjxz Ez Hofx Ab Tsk

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Codpfxovvkmbo Ab Tork

Condition: used, Year of construction: 2019, bore capacity in steel (diameter) 50 mm throat 360 mm bore stroke 240 mm taper MK 5 MK table-size 580 x 460 mm feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds 52 - 1400 U/min total power requirement 3,0 KW weight of the machine ca. 0,75 t dimensions 0,8 x 1,2 x 2,2 m Pillar drilling machine: - Feed rate 0.1 to 0.4 mm/rev - Tapping attachment - Digital speed display - Coolant pump - Motorized table height adjustment - Rotating and swiveling table Cjdpfsxz Hgkjx Ab Terk - Machine light

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Credjvvi Aujpfx Ab Tek