Used Drill Tap Machine for sale (65,799)

Condition: new, 40 mm M 24 M 30 MK 3 bore stroke 120 mm throat 293 mm column diameter 115 mm 514x360 mm 2 x 14 x 224 mm 117/701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160-2.250 UpM total power requirement 1,45/1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: Pedpfx Ajyvvnvohvogi - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW Podsyvvm Sopfx Ahvsgi height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Pjdpfxjyvvmxs Ahvegi Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm spindle stroke 120 mm Pjdpfxeyvvmro Ahvjgi Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: good (used), heads set: right/left/top/top Podpfx Ahoyxc Dvovogi spindles span 32mm motors 1,1kW heads with 5 spindles max heads span 2,5m pneumatic clamps regulation of drilling speed

Condition: good (used), pneumatic clamps automatic material feeding angle regulation Pgedpfxeyxczuo Ahvji pneumatic movement of heads material support slot length regulation slot distance regulation

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic strip feed aggregate angle adjustment pneumatic spindle movement Pgsdpfx Ahoyxczbsvei strip supports oscillating drill movement adjustment feed stroke adjustment 380V power supply

Condition: good (used), functionality: fully functional, 4-speed gearbox speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment Pjdpjyxcu Isfx Ahvjgi vice available at extra cost

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm Pgedpfxeyvuh Io Ahvoi X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: refurbished (used), Year of construction: 2014, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 625 rpm, spindle diameter: 200 mm, Schiess AR-601/142 – completely overhauled in 2014 Main data: X (longitudinal travel of column): 12,000 mm Y (vertical travel): 4,050 mm Drilling spindle travel: 1,600 mm Milling spindle travel: 900 mm Spindle diameter: 200 mm Spindle power: 91 kW Spindle speed: 1.18 – 625 rpm Capacity: Max. drilling diameter: 1,600 mm Max. machining diameter: 3,000 mm Lifting capacity: 120 tons Rotary table: Diameter: 3,000 mm Max. load: 100 tons Accessories included: Steadies Clamping plates: • 2 units – 8 x 5 m • 1 unit – 6 x 3 m Angle plates Pgedjyxa E Repfx Ahvei

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Pgjdoxwaz Hspfx Ahvji

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. Pedpfjxnlflex Ahvogi - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Empty weight: 4.200 kg Pgedewnifrepfx Ahvsi - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Pgjdoqa Txqopfx Ahvei Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm Pgsdpfx Ahoihmwtevei pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Pgodpfx Asyvrrqehvsi Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # Podod Supgopfx Ahvjgi distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: excellent (used), Control: Heidenhain TNC 124 Travel paths X/Y/Z: 500/250/160 mm Travel path W: 480 mm Clamping area (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Pgsdpfx Aoyvrfdohvoi Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm Pjdpfx Ajxyf E Nehvsgi • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Psdpfx Aswkba Hehvsgi Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Pgsdpfsw I Uy Tex Ahvei Location: Röllbach

Year of construction: 2013, condition: excellent (used), Technidrill 'GD-100-5-160 BTA-Ejector-Gundrill' Deep Hole Drilling Machine with Heidenhain 320 CNC Control (2013) 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012); S/No. 7351-03/13. Pgsdpoyw Tgxsfx Ahvei Automatic Steady; Schunk Approx 300mm Capacity Hydraulic Clamp; Allen Bradley Safe 4 Receiver Guard Shield; 480 Volt Power Supply, 3-Phase; Lista Steel 5-Drawer Cabinet (700mm x 720mm x 900mm High) with Assorted Guides, Steady Rests & Assorted Gun Drills

Condition: like new (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Offering an as-new DMG MORI bar guide with 2000 operating hours, including an IEMCA BOSS 338 Type 32LL bar feeder. Psdpfx Asyw S Emshvogi

Condition: used, machine/vehicle number: 12400, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 25 mm, spindle mount: MK 4, drilling depth: 120 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 590 mm, total length: 700 mm, total height: 2,050 mm, throat depth: 315 mm, table width: 590 mm, table length: 700 mm, overall weight: 1,000 kg, VEB BK 25 AI Column Drilling Machine – Robust Industrial Version For sale is a stable and durable column drilling machine, model BK 25 AI, manufactured by VEB Werkzeugmaschinenfabrik Saalfeld (GDR). This machine features a heavy-duty cast iron design, making it ideal for use in workshops, mechanical engineering, maintenance, or training facilities. The machine provides a drilling capacity of up to 25 mm in steel and is equipped with an MK4 spindle taper. It offers a total of 12 mechanical speed settings, ensuring high torque and optimal adjustment for various materials. The quill stroke is 120 mm, with a throat depth of 315 mm. The generous worktable (700 × 590 mm) with T-slots offers versatile clamping options. Both drill head and table are adjustable, allowing for flexible operation. Power is supplied by a 2.4 kW motor (380 V, 3-phase, 50 Hz). The spindle speeds range from 63 to 1000 rpm. Technical Highlights: • Drilling capacity in steel: 25 mm • Spindle taper: MK4 • Speed range: 63 – 1000 rpm • 12 mechanical speed settings • Quill stroke: 120 mm • Throat depth: 315 mm Pgedpsyw Rpwefx Ahvsi • Table size: 700 × 590 mm • Total weight: approx. 1000 kg • Connection: 380 V / 3-phase Equipment: • Height-adjustable worktable • Mechanical speed selection • Solid cast iron construction • Industrial-grade design • Made in Germany (GDR) The machine is in good used condition and ready for immediate operation. Inspection under power is possible.

Condition: new, Year of construction: 2024, functionality: fully functional, NEW MACHINE! CNC SCM Startech CN PLUS ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW Pgsdpfx Ajip Dh Iohvji - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm