Used Drill Tap Machine for sale (92,467)

Condition: like new (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, workpiece weight (max.): 180 kg, total height: 1,967 mm, type of input current: AC, total width: 981 mm, total length: 1,047 mm, travel distance X-axis: 410 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 310 mm, overall weight: 410 kg, input voltage: 230 V, table width: 624 mm, table length: 805 mm, table load: 180 kg, compressed air connection: 4 bar, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, Mitutoyo Crysta-Plus M443 Coordinate Measuring Machine with HP workstation and monitor Year of manufacture: 2011 Very little used, excellent condition Thanks to its integrated thermal error compensation, the Crysta-Plus M443 can also be used outside of a thermally stable measuring room within a temperature range of 15 to 30 °C. X-axis: 400 mm Y-axis: 400 mm Z-axis: 300 mm Bsdpfx Aoxmhw Iscyeww Accuracy (ISO 10360): E = 3 + 0.4 L/100 µm within a temperature range of 15 to 30 °C Resolution: 0.0005 mm Probe head: Renishaw MH 20i + PS12R Measuring table: Granite 624 mm x 805 mm Pneumatic axis clamping for each axis, additionally operable via foot switch Workpiece clamping: threaded insert M8, 13 positions Distance between columns: 625 mm Maximum workpiece height: 400 mm Maximum workpiece weight: 180 kg Machine weight: 480 kg Recommended installation area (incl. PC): 2.5 x 2.5 m Extensive accessories, e.g. probe heads, master ball The machine is operational and can be inspected and tested on site. Packaging costs: Wooden crate, suitable for international shipping €800.00

Condition: new, Bore diameter variabel mm Bsdod Ih Hqepfx Acyeww Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: MT1212_38, warranty duration: 36 months, Multitapper 1212 automatic threading machine Bwsdoxd U R Nspfx Acysw CoastOne - Made in Finland New machine Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5kW Speed range: 300 - 4000 rpm Speed steps: stepless spindle mounting: MK-3 Drilling stroke: approx. 105 mm spindle throat: 200 mm Bwsdpfehpmbbex Acyjw Weight: 152 kg

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight. Bjdpfx Acsq Nn Hcjyoww

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm Bwedpfjxbtrgex Acysw continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: used, Year of construction: 2012, operating hours: 10,000 h, Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this format for its reliability. Additionally, the machine rotates clockwise, aligning with standard bottling line layouts and reducing the need for costly modifications. Its compact design, moreover, integrates smoothly into existing production environments, even when space is tight.  Safety Features and User-Friendly Maintenance The used capping machine AVE 6T up to 7000 bp enhances safety by incorporating advanced protective features. For instance, these systems shield operators from potential risks, reducing accidents and improving workplace safety. Furthermore, the safety mechanisms allow operators to access and maintain them quickly, ensuring consistent compliance with industry standards. The technical manuals of Stelvin Lux, in addition, offer clear instructions for installation, maintenance, and troubleshooting. These guides, therefore, enable operators to resolve issues efficiently, minimizing downtime and preserving productivity. Additionally, the machine’s modular design allows technicians to replace components quickly, streamlining maintenance tasks and lowering repair costs. Current State and Electrical Requirements The machine for Stelvin Lux currently remains in storage, ready for immediate installation on a new production line. Moreover, it operates at 400 V, with a power requirement of 3 kW and a frequency of 5 Hz. Therefore, users should verify these specifications to confirm compatibility with their existing electrical systems. Furthermore, the machine’s low energy consumption supports production facilities in reducing operational costs without compromising performance. Bjdpfxovgvabo Acyjww Robust Performance and Durability of Stelvin Lux Thi machine withstands demanding production environments with its durable construction. Notably, its six capping heads ensure consistent quality in every operation, maintaining high production standards. Consequently, businesses rely on this machine to meet ambitious production goals while preserving the integrity of their products. Moreover, its precision and efficiency make it a valuable asset for any bottling operation.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 Bwodpfx Acsd Ih Hysyow 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2025_23, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Bwedpsxd U Rvjfx Acysw Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Condition: like new (used), Year of construction: 1991, machine/vehicle number: 176063, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Bsdpfx Ajvfmiwjcyoww Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: new, Year of construction: 2010, Center of spindle to wall or column 235 mm Column diameter 60 mm Size of table plate 290 x 290 mm Motor output 1 kW Bwodpew Spc Refx Acysw Speed 50 - 4000 U/min. weight of the machine ca. 72 kg

Condition: excellent (used), Year of construction: 2007, BEMA MG1050 Radial Arm Drilling Machine Year of Manufacture 2007 1000mm Radial Arm Spindle Centre to column min/max 300 - 1000mm Spindle Taper 4MT Spindle Motor 2.2kW Speeds 32 - 2500rpm Spindle Stroke 280mm Box Table 600 x 450 x 450mm Base Plate 1700 x 800mm LWH - 1760 x 800 x 2050 Weight 1600Kgs *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78995 Machine Serial Number: 710080 Cost: £5,950.00 + VAT (£7,140). Bwedpfxexawcmj Acyow Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Bodpfx Acew Rhk Rjyeww Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 46930311, measuring range X-axis: 550 mm, measuring range Y-axis: 750 mm, measuring range Z-axis: 400 mm, table width: 880 mm, table length: 830 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range X-axis: 550 mm Measuring range Y-axis: 750 mm Bwjdpfxjw Nguls Acyew Measuring range Z-axis: 400 mm Measuring table: Granite table, dimensions: 880 x 830 mm Software: MCOSMOS MACHINE DETAILS Overall height: 2,400 mm Overall width: 1,300 mm Overall length: 1,400 mm Total weight: 1,000 kg

Condition: good (used), Durselen Corta PB-01 STE Automatic paper drill The device is in very good condition, ready to work. This is one of the newest Durselen models, the most advanced model. Bwjdpou Ul Hnjfx Acysw Production Germany. 6 drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system and lubrication. A programmer for controlling the table that allows you to approach programmed distances. Smooth regulation of spindle speeds and smooth regulation of the speed of lowering the heads. Waste disposal compressor Sliding column system on a tape. Technical data: Drill diameter: 2-10 mm, Stack height: 60 mm, weight: 400 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Waste is directed to the external pocket. The set includes operating tools, instructions, drills and sharpener.

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Bjdpeuyk Rljfx Acyeww

Condition: good (used), Year of construction: 2015, We offer you: Foam cushion packaging machine Manufacturer: Sealed Air Model: Instapak 901 Bwodow Ra Ihjpfx Acyew Year of manufacture: 2015 Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2012, The device is in very good condition. Purchased after the factory was closed down. Currently it is still located in Germany. Planned dismantling on 14/10/2024. The service will be performed by a professional company. The price includes dismantling, securing and loading. Bsdour N N Nepfx Acysww

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 650 mm, insertion depth: 610 mm, insertion height: 80 mm, table height: 940 mm, cutting length (max.): 650 mm, stack height: 80 mm, overall weight: 302 kg, total width: 992 mm, total height: 1,293 mm, total length: 1,220 mm, input voltage: 230 V, input frequency: 50 Hz, Equipment: safety light barrier, Used, fully operational ELECTRIC STACK PAPER CUTTER INCLUDING FREE SHIPPING WITHIN AUSTRIA & GERMANY is offered for sale here (free shipping to other countries may also be available on request). Purchase date: 17.08.2020 (new) Purchase price: €8,699 excl. VAT The IDEAL 6655 is an electric precision stack paper cutter designed for professional requirements up to DIN A2. With its generous cutting length of 650 mm and cutting height of 80 mm, this model is ideal for use in digital printing, print finishing, and technical offices with regular cutting needs for larger paper formats. HIGHLIGHTS - Sturdy all-metal construction - User-friendly cutting initiation via patented 2-step control elements EASY-CUT - Optical cutting line indicator with LEDs - High safety due to Safety Cutting System SCS (electronically controlled safety device on front table and safety cover on rear table) - Manual back gauge positioning (electronic hand wheel, infinitely adjustable from fast to slow) - Two side lays each on front and rear tables - 99 programs with up to 99 program steps each (automatic program sequence for cutting) - Direct measurement input via numeric keypad (integrated calculator) - Pre-programmed standard DIN format sizes - Memory buttons for fixed sizes (freely programmable) - Electrically operated back gauge with touchpad - Blade depth adjustment from outside - Safe blade change - Disc brake for immediate blade stop - Automatic return of blade and clamp from any position Bwedswyn Nmopfx Acyew - Ergonomic operation due to optimal table height of 940mm TECHNICAL DATA - Dimensions (D x W x H): 1220 x 992 x 1293 mm - Cutting length: 650 mm - Cutting height: 80 mm - Narrow cut: 25 mm - Feeding depth: 610 mm - Electrical connections: 230V / 50Hz - Weight: 302 kg INCLUDED ACCESSORIES - Stand/base frame - Paper tray shelf - Removable tool holder at rear table - Stack angle - Spare cutting sticks - 2 high-quality knives made of premium knife steel SHIPPING Free and insured shipping to Austria or Germany is included in the purchase price! Shipping to other countries may also be possible free of charge upon request. ITEM CONDITION The machine has already been used but shows no signs of wear, is in very good condition, and fully functional. VIEWING The machine can be inspected by appointment in 8700 Leoben. Upon request, we are happy to produce and send a video demonstrating the cutting process to confirm its functionality. WARRANTY The sale is made under exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller’s obligations, or for any injury to life, body, or health. The above article has been described to the best of our knowledge and belief, and all potential defects, insofar as known to the seller, have been disclosed. Subject to prior sale.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Equipment: compressor, STC-Ref:G-012-3707 MBO T800 - 6/4, Year: 1999 format: 820x1150 mm equipped: - delivery - with integrated pressing device - noise hoods - pressing station in delivery DESTA - Control system MC-control - compressor - batch counter - MBO counter - NEW rollers in 2012 - type: MBO T-800-6/4 - Delivery DESTA - rotary feeder /continous feeder R-800 - 1st folding unit: 6 buckle plates - 2nd folding unit: 4 buckle plates Bedpfeuta S Rsx Acyoww - knife shaft at cross fold

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Technical data Maximum 6,000 sheets/hour (A4 landscape with 1 crease) 80 - 400 g/m² Sheet format: 36 x 65 cm maximum to 8 x 10 cm minimum, 36 x 85 cm (optional table extension) Integrated suction and blowing air Specially coated suction roller prevents marking Control panel Weight 116kg, 140 x 65 x 116cm, 230V power supply Bwsdpfx Aswxm Urscyew

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Bodpfx Acswvuuboyeww Equipment: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Condition: good (used), In good technical condition and fully functional. (Like new) Type: Crysta Plus M544 Bwsdpfx Acjwi H S Ejyew Manufacturer: Mitutoyo MCOSMOS manual version V4.

Condition: new, Optimum OPTIdrill DM 50V magnetic core drilling machine High-quality machine with infinitely variable speed control and maximum functionality. TECHNICAL DATA Dimensions and weights Length (product) approx. 250mm Bwedpfx Acet Ifidsyow Width/depth (product) approx. 220mm Height (product) approx. 300 - 470mm Weight (net) approx. 11kg Drive power Input power 1.7kW Mounting Spindle holder fixed Drill holder Weldon 3/4 " Speed range Speed(s) at idle (clockwise rotation)100 - 810 min¯¹ Infinitely variable speed control Electrical data Supply voltage 230V Mains frequency 50Hz Standards and approvals EMC class C2 Standard DIN EN 55011 Protection class IP 42 Magnet Magnet holding force 15.6kN Magnetic base length 166mm Magnetic base width 80mm Core drill Max. core drill diameter with manual feed 50mm Drilling depth max. core drilling with manual feed 50mm Solid drill Drill diameter max. solid drill directly mounted 13mm SCOPE OF DELIVERY Carrying case Operating tool Safety belt Quick-change chuck EQUIPMENT Vario drive ✔ Manual quill feed

Condition: new, Optimum OPTIdrill DH 40G Universal column gear drilling machine 3034356 TECHNICAL DATA Dimensions and weights Length (product) approx. 590mm Width/depth (product) approx. 700mm Height (product) approx. 2050mm Weight (net) approx. 320kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 Drilling table Drilling table work surface length 500mm Drilling table work surface width 460mm Drilling table T-slot size 14mm Load capacity drilling table 50kg Bjdpfxet N Ri Eo Acyeww Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Spindle Quill stroke 120mm Spindle holder MK 4 throat 280mm Drill head rotation 45° Drill head inclination 360 Manual quill feed Drill head height adjustment 265mm SCOPE OF DELIVERY Gear rim drill chuck 1-13 mm/B16 Tapered arbor for drill chuck MK4/B16 Tightening rod M 16 Adapter MK4-MK3 Operating tool