Used Drill Tap Machine for sale (84,966)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm Kodexn Hzbepfx Affsfa CE standard

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 32 mm Kfjdpfxowz Rvfo Affoa throat 300 mm bore stroke 150 mm MK 4 480 x 480 mm 0,1 - 0,2 mm/U M 22 (St 60) 35 mm 80-1170 U/min 2,3 kW 350 kg 800 x 1000 x 2000 mm Accessories: - Automatic feed - Coolant device in the base - Automatic thread cutting reversal - Stepless speed adjustment - Machine light - Spindle guard

Condition: new, Year of construction: 2024, functionality: fully functional, - Single-head drilling machine for drilling from 0 – 90 ° - Pneumatically adjustable head angle - Cast iron spindles - High-speed spindles - Pneumatic material clamps - Cast iron worktable - Quick and precise setup - Accurate drilling STANDARD MACHINE EQUIPMENT: - 2 aluminium rulers, each 1.5 m long (right and left) with two stops - 5 quick-release drill chucks Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic presses: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 – 7 bar Rotation speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm Pickup: Almelo, Netherlands Kedpfexwcbcox Affofa Mobile: +31634707163

Condition: new, Year of construction: 2024, - BX 40 with a drilling capacity of 40mm in steel - throat 350mm - drilling stroke 180mm Ksdpfoibwq Nsx Affsfa - column diameter 150mm - turnable and tiltable table - 2,2kW drive - gearbox with hardened and ground gears - 9 speeds between 132 - 1850 rpm - 3 feeds

Condition: like new (used), Year of construction: 2021, Like-new drill press from Arodrill (Denmark) Ksdpswc Nhiofx Affjfa Capacity up to: 25 mm Mounting: MC 3 RPM: 220 - 1680 Year of manufacture: 2021

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm Ksdpfx Afjfg U Tusfefa threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: excellent (used), number of spindles: 35 Kedpow U Aiiefx Affsfa pneumatic head inclination

Condition: used, Year of construction: 2018, bore capacity in steel (diameter) 32 mm Kfjdpjxcuwmjfx Affoa throat 300 mm bore stroke 150 mm MK 4 480 x 480 mm 0,1 - 0,2 mm/U M 22 (St 60) 35 mm 80-1170 U/min 1,45 kW 0,34 t 0,8 x 1,0 x 2,0 m Accessories: - Automatic feed - Coolant device in the base - Automatic thread cutting reversal - Stepless speed adjustment - Machine light - Spindle guard - Drill chuck - Emergency stop switch - CE marking

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Kodjnvdtcspfx Affjfa Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: new, Year of construction: 2024, - AZ 34 with 34mm drilling capacity in steel - throat 300mm - drilling stroke 150mm - spindle mounting MK 4 - speed infinitely variable 100 - 2000 rpm Kedpsibwrmsfx Affsfa - feeds 0,1 // 0,2 // 0,3 - weight 360 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 601264, Technical specifications: Kjdpstrn Rysfx Affofa -spindles 21 -center distance between spindles 32 mm -width of the drilling head 640 -maximum hole depth 70 -maximum dimensions of drilled parts 800x3000 -spindle revolutions per minute 2800 -motor power 2 kW -normal pressure 6 - 8 bar -weight of machine 295 -machine size 1070x890x1240

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm Kfjdpfx Ajfg U Ttjffea spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Year of construction: 1995, condition: ready for operation (used), 1 brought threading machine Manufacturer: Microtap Type: Megatap II Year of manufacture: 1995 Technical data: - Operating voltage, machine standard 230 V ± 10 % version microtap II - Frequency 50/60 Hz - Power consumption - Version G8/ 230 V 16 A / T (slow) - Compressed air unlubricated (ZAP - operation) min. 200 kPa (2 bar) max. 800 kPa (8 bar) - Compressed air unlubricated (MMS - operation) min. 400 kPa (4 bar) max. 800 kPa (8 bar) - Torque - Version G8 50 to 700 Ncm - Rotational speed - Version G8 300 up to 3.000 min-1 Kfodpfsim Iqqex Affsa - Spindle stroke version Version G8 max. 85 mm - achievable thread depth version G8 max. 75 mm - achievable accuracy of depth measurement 0,1 mm (without consideration of the tolerance of the tool holder) Operating instructions Dimensions, weights - Dimensions over all approx.: (L (depth) x W x H in mm) Version G8/14/16 - with column 750 mm at max. adjustment travel 544 x 312 x 1047 - With a higher column, the height dimension increases by the difference of the column height. - Machine type Spindle Tool holder Version G8 Taper B12 SZS / Quick change system SWS1 Working ranges - Adjustment travel of the columns in Z-direction (without tool) Column type Version G5 Version G8 Version G14 /16 750 mm approx. 430 mm approx. 400 mm approx. 388 mm - Thread capacity (cutting) - Version G8 M 2.5 - M 8 (X5CrNi189) (Metric ISO standard thread; M 2.5 - M 10 (9SMn28)

Condition: new, sweeping width 1750 mm Kfodpfx Afeu H N Tlofja weight of the machine ca. 300 kg dimensions of the machine ca. 2100 x 1450 x 1000 mm Sweeper for forklifts, wheel loaders, Hoftrac, working width 1750 mm, dirt collection tray 250 liters, with level compensation and front support wheel, PPN sweeping roller 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilt adjustment, height-adjustable support wheels with metal rims, hydraulic drive, hoses, and couplings. Extra bearing on hydraulic motor, drive pockets W/H: 200x70 mm. - Made in Germany

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm Kodpfx Afjw Ad Tmjfsfa magazine feeding manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch Kfodpfet U Scwjx Affea - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: excellent (used), bottom heads 2x 22 spindles side head 21 spindles spindles span 32mm 3 pneumatic clamps pneumatic setting of heads working dimensions 2400x1200mm Kedow Ad Taepfx Affofa

Condition: new, Year of construction: 2023, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m Column drilling machines - V-belt drive with foot switch Kodpfot U Sc Rex Affofa - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U Kfsdpfx Ajn Ea Twjffea spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Condition: new, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system Kodpfx Ast U Scqoffjfa - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Kfsdpfx Afoun Um Eefsa * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, bore capacity in steel (diameter) 25 mm bore stroke 120 mm MK 3 10 manuell 245 – 4.100 U/min manuell über Griffkreuz 300 x 270 mm 100 mm 250 mm 0,71 / 1,35 kW 0,23 t 700 x 500 x 1400 mm Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth - automatic tool ejector - Movable intermediate table, fixed drill head - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) Kjdpfx Asn Ea Tzeffofa - CE conformity and marking - Documentation, operation and maintenance manual

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm Kedpfxoq Nrmrj Affefa - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING) Kfsdpfx Afst U Sc Djfsa

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, hydraulic drive, hoses and couplings. Extra storage on the hydraulic motor, Kfsdpfx Afjulnbqefja Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive