Used Drill Press Machine for sale (100,166)

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Djdpfor D T U Dex Afzsku Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V Djdpfx Afjupxdqjzoku weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Year of construction: 1992, condition: good (used), machine/vehicle number: 92-2083, Twist drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 machine no.: 92-2083 Year of construction: 1992 Technical data: - simple service - Grinding process by means of gear motor - Twist drill dimensions 3 - 50 mm - acute angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - Geared motor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg Dkjdpofhy N Sefx Afzsu - with - Clamping device - Presetting device

Condition: good (used), Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 300 kg, table width: 400 mm, overall weight: 870 kg, table length: 300 mm, Electrode diameter 0.1 - 3 mm Electrodes available in brass, copper, or carbide Suitable for starter hole drilling in steel, aluminum, hard metal for wire EDM or for precise, deep, narrow boreholes Manual or CNC-controlled programming cycle Approach cycles Includes pump and collection tank on castors Dkjdpjw Dqdnjfx Afzsu Includes drill chuck and seal for 1.5 mm electrodes Machine can be inspected or tested under power at any time.

Condition: excellent (used), REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Djdpfx Afot Uim Hozeku Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Dkjdpfxsv N Uyrs Afzou Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: used, Column drilling machine INFRATIREA - ORADEA Type PH - 031 Serial no. Year of manufacture 1975 Djdotrpifspfx Afzsku Drilling capacity 40 mm Spindle taper MK 4 – short quill Throat 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 – 1500 rpm, 6 gear stages Motor output 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed via 6 gearbox stages - Right and left-hand rotation - Automatic feed 0.10 – 0.16 – 0.25 – 0.4 mm/rev - Swiveling drilling table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump in machine base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg Good condition

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max working pressure: 150 bar - Extraction nozzle: 90 mm - Filter bag opening diameter: 500 mm - Max bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Italian manufacturing – Possibility of direct connection to sawdust extraction – Used briquetting machine – DTR documentation – Very good condition Net price: 29,900 PLN Dkedpfx Afsxa Ephszeu Net price: 7,050 EUR (exchange rate: 4.25 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2024, DEWATERING PLASTIC FLAKES LDPE, HDPE, PP Dkodexcx R Rspfx Afzsu CAPACITY: 1500 kg/h

Condition: used, drill diameter 3.0 - 40.0 mm turning speeds 2800 U/min lip angle 40 - 180 ° grinding wheel size 200 x 30 x 40 mm face stroke 80.0 mm longitudinal stroke 70.0 mm voltage 380 V total power requirement 1.18 kW weight of the machine ca. 225 kg. range L-W-H 750 x 1200 x 500 mm Description: Djdpfx Asxabidefzoku The 1/BM grinding machine is capable of grinding standard twist drills, diamond and avyac drills with any drilling angle, taps, end mills, step drills, reamers, and countersinks, and of producing step drills. It also allows the regrinding of most workshop tools. Furthermore, thanks to its ease of use, no specialized personnel are required. The 1/BM machines all consist of a cross-shaped head housing the grinding unit and a swivel head with a tool spindle, as well as a flag-like device for core- pointing the drills. The swivel head is equipped with a six-position chuck, which, together with the positioning plate, ensures easy and precise clamping of the tool to be ground. It can be rotated to produce drills with any drilling angle. Furthermore, its cam mechanism allows for machining tools with up to twelve cutting edges (six with the included cams). Includes coolant system.

Condition: excellent (used), Description to follow! Dodpfx Aew U U Ikefzoku

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Dodpfxeu Ng Hno Afzsku Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Dkodpfxjw A Srwj Afzou Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Condition: ready for operation (used), machine/vehicle number: 153556, drilling capacity: in St 60 6 mm Djdpfx Afsfnbglszjku spindle taper: B 12 MK throat: 165 mm table size: 290 x 300 mm spindle turning speed range: 400 - 4000 rpm engine: 380 V, 0,34 kW space needed: 450 x 300 x 680 mm weight: ca. 50 kg

Condition: reconditioned (used), Fortuna roll press / dough mixer size 3 up to 85 gram the machine is overhauled and new painted with 3 operating plates Djdpfx Ajc Utkaofzsku 4x16 Ah connection the machine works great and can be put into operation immediately. for further questions, please contact us, thank you very much.

Condition: used, functionality: unexamined, machine/vehicle number: ET18, Milling/drilling machine with movable table, manual/semi-automatic travel, 380V three-phase power supply Dsdpfx Aoxbhmxsfzjku

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Dkedpfxsw Tc Hfo Afzeu Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: new, Year of construction: 2025, Standard equipment: Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electric. Protection Connection cable with Schuko plug 3-year guarantee for single-shift operationContinuous/normal drilling performance (mm) 6/8 (in E335/ST60) Thread cutting performance (depending on pitch) M5 Spindle B12 drilling depth (mm) 60 Thrust (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), distance (mm), width dimension (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drill depth stop stop ring (positive locking) Drill depth display digital Speed display digital Motor three-phase - frequency-controlled, mains connection 230 V (kW) 0.54 Spindle speeds continuously variable (1/min) 100 – 10000 Spindle/work surface (mm) 140 – 315 Machine dimensions with packaging (mm) 452 x 700 x 1,130 Machine dimensions without packaging (mm) 320 x 520 x 820 Weight (kg) 44 Optional accessories: Precision keyless chuck for Turbo Dril (0.5-6 mm), B 12: €160 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? Dsdpfxsvupt De Afzoku WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit - electric foot switch Dkedpsttc Uajfx Afzeu weight 3000 kg good condition

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg Dkjdpfsfnbgqjx Afzou

Condition: used, Year of construction: 1996, drill diameter 3 - 50 mm drilling length 500 mm lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Serial-No.: 76658 Dkjdpfx Aop Raizefzsu

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Dkjdew Rcrpspfx Afzou Format: A4 Number of Colors: 1

Condition: new, Year of construction: 2025, total height: 5,000 mm, table width: 1,000 mm, table length: 900 mm, total width: 2,000 mm, total length: 2,300 mm, pressing force: 350 t, stroke adjustment: 270 mm, warranty duration: 24 months, stroke length: 270 mm, Equipment: safety light barrier, IMMEDIATE DELIVERY FROM STOCK STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • Additional T-slotted bolsters • 8 guided ram • Adjustable stroke with single connecting rod • Ram with counterbalance piston • Fully automatic micro oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Overload hydraulic safety device • Motorized ram adjustment mechanism • Light curtain (photoelectric safety barrier) • Enclosed gear unit in oil reservoir • Double-solenoid safety valve • CE conformity • 24-month warranty against manufacturing defects • Country of origin and manufacturing: Turkey TECHNICAL SPECIFICATIONS: PRESSURE (TON): 350 STROKE (MM): 270 RPM (CYCLES/MIN): 30/45 MAXIMUM OPEN DIE HEIGHT (MM): 770 MAXIMUM CLOSED DIE HEIGHT (MM): 500 USABLE TABLE DIMENSIONS (MM): 1000x900 ADJUSTMENT DISTANCE (MM): 150 Dodpfxjw N Ruvj Afzoku SIDE WINDOW WIDTH (MM): 600 MOTOR POWER (KW): 37 WEIGHT (KG): 30,000 MACHINE DIMENSIONS (MM): 2300X5000X2000

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Dsdsw Iq Ugepfx Afzsku Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Year of construction: 1955, machine/vehicle number: 104 678 N, Format: A4 Number of Colors: 1 Dkodpfx Afjw Rb U Nezsu