Used Drill Grinding for sale (8,612)

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t Cedpfjx H Andsx Ailerd In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m Cjdsxq R Haopfx Ailerd In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Crjdpfxexp R D Ne Ailsd Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm threading in St 60 M 24 threading in GG 20 M 30 Short spindle MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm Codpfoyvvptex Ailord feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: used, Year of construction: 2022, width of the strips 150 mm band length 2000 mm turning speeds 1500x3000 U/min Cjdjzip Ndjpfx Ailsrd total power requirement 2,6/3,1 kW weight of the machine ca. 200 kg

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 40 mm throat 345 mm Csdpozip I Hefx Ailerd bore stroke 220 mm tool adaptor MK 4 machine weight ab. 400 kg

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm Codpjyvvq Dofx Ailsrd throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: good (used), Code: 0431 Brand: GRIGGIO Model: GF 27 - CE Standard Multiple boring machine with 27 spindles for furniture, custom-made furniture, kitchens, joinery, panels, bathroom furniture and various – CE Standard Technical specifications: N° 27 quick-change spindles Crjdpfx Aijzipq Isled Centre-to-centre distance between each spindle 32 mm Total centre-to-centre distance between the first and last spindle 832 mm Max drilling depth 85 mm Table dimensions 1050 x 380 mm Motor 2 Hp N°2 pneumatic workpiece clamps Squares on the worktable Drill bit holder Pneumatic head tilting from 0 to 90°, allowing drilling in any position Extension rods for stop holders Quick Dept Overall dimensions mm 1200 x 780 x 1300 h Weight kg 360

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Csdszinz Sjpfx Ailjrd Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm Credpjzinzxjfx Ailjd - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Crodpeziny Isfx Ailed Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 179-000-000000-000, functionality: unexamined, Machine data Designation: IMI Installation dimensions: approx. 2000 × 1200 × 2300 mm Weight: approx. 1500 kg Csdpfxozim R Ej Ailjrd

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Codpfxjzimx Aj Ailsrd Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Technical details grinding length 800 mm grinding width 400 mm workpiece height 375 mm weight of the machine ca. 3,5 t Additional information CNC Precision Surface and Profile Grinding Machine Crsdpfx Ajzimvnoilsd This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: ready for operation (used), functionality: fully functional, grinding length: 800 mm, grinding width: 350 mm, Magnet, 800 x 350 mm. Crsdpfx Aijzimmmoled

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, The machine is in good working order. See the video. Crodpfx Aszimhweiled

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The machine is in good working order. See the video. Crsdpfx Aszimgyjilsd

Condition: used, machine/vehicle number: 32396, overall weight: 1,000 kg, total length: 1,820 mm, total width: 1,300 mm, total height: 1,250 mm, Year of construction: 2023, Machine Data Dimensions (W × H × D): 1300 × 1820 × 1250 mm Weight: approx. 1000 kg Drive & Performance Main drive: 15 kW, continuous operation Connection power: 30 kVA Crodpfozilwqsx Ailjd Cutting Disc Diameter of cutting disc: up to Ø 508 mm / 20" Cutting disc mounting: Ø 32/40 mm Speed: continuously adjustable 1000–2800 / 1000–2400 min⁻¹ Processing Data Max. sample size: Ø 190 mm Feed rate: 0.001–50 mm/s Positioning accuracy of the Z-axis: 0.1 mm Axes X-axis (cross-section): 420 mm, automatic Y-axis (cross-section): 280 mm, automatic Z-axis (parallel cut): 200 mm, automatic (optional) Table Data Table size with Z-axis: 550 × 500 mm Table size without Z-axis: 700 × 500 mm T-slot width: 12 mm

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Cjdpfxoyqxxrj Ailsrd Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Scharmann drilling machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Csdjzilmropfx Ailjrd Vertical (Y): 1,200 mm Transverse (Z): 1,150 mm Spindle speed: 20 – 6,000 rpm Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Credezill Ujpfx Ailed Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Credpfoziligex Ailod Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details grinding length 600 mm grinding width 300 mm workpiece height - mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 2800x2200x1890 mm Additional information Horizontal surface grinder in excellent condition The machine has been in operation for only a few hours. Work area • Travelling distance X-axis: 765 mm • Travelling distance Y-axis: 340 mm • Table dimensions: 300 x 630 mm • Scale ring division Y-axis: 0.02 mm • Scale ring division Z-axis: 0.005 mm • Autom. transverse infeed: 0.1-8 mm • Autom. vertical infeed: 0.005-0.05 mm Csdpfjzild Rsx Ailsrd Drive unit ratings • Motor rating main drive: 5.5 kW • Motor rating servo-drive: 0.5 kW Dimensions and weights • Total weight: 2,700 kg • Dimensions: 800 x 2200 x 1890 mm • Grinding wheel dimensions: 350 x 40 x 127 mm Accessories: 2-axis position display Knuth Xpos 3.1 Grinding wheel, Grinding wheel flange, Balancing arbor, Balancing stand, Halogen work light, Magnetic chuck 600 x 300 mm Leveling screws, Operating tools,

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Codpszilaxjfx Ailjrd Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Csdpfox Afpasx Ailsrd Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *