Pillar drilling machine

Rogi RD32

Condition: new, Year of construction: 2025, operating hours: 1 h, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Working pressure hydraulic system: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Rotation range: 360°, with a rotation speed of 13 rpm kink boom joystick control adjustable chassis Technical data: Manufacturer: HZC Power GmbH Model: DKB991 Engine: Buy diesel engine with 9.5 HP/7 KW Cooling: Hydraulic oil cooler Max. torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: Up to 150 kg Fuel tank capacity: 5.5 litres Electric starter: 12 volts Maximum climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Crawler chassis dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 litres (HLP46) Pump type: gear pump Slewing radius: 360° Slewing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Breaking force on the bucket: approx. 650 kg Hydraulic output: 30 litres per minute Digging depth: 1650 mm Overload height: 2150 mm Reach on the ground: 3000 mm Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lifting capacity: 600 kg Rsdpfx Aevz Ih Tsdaon Product/shipping weight: 940 kg Special features: Excavator arm with articulation (120°), hydraulically adjustable chassis from 90 cm - 110 cm, additional hydraulic connection on the excavator arm for hydraulic accessories

Condition: good (used), 1 x Drilling - tapping machine Redpfx Adjipyiweaen Wörner BG 16 with pneumatic feed (drilling by hand also possible) Coolant device Technical data: spindle speeds : 95 - 3.500 rpm (24 steps via pulley 2 via motor) mounting: MK 2 Drilling capacity in steel: 16 mm Threading in steel: M 8 The machine can be inspected under power.

Condition: new, Variable-speed ISO 40, Motorized cross table on all axes. 3-axis viewer included. Base with chip tank. Refrigeration system. Led lamp. Mechanical speed indicator. Variable speed motorized axes with rapids. Rail lubrication system with manual pump. Milling capacity with insert cutter : mm 100. Milling capacity : mm 35. Drilling capacity on cast iron with pre-hole : mm 60. Max drilling capacity on steel with pre-hole (s235jr) : mm 24. Spindle taper : ISO40 DIN2080. Spindle sleeve : mm 86. Spindle stroke : 120 mm. Head inclination : +/- 45°. Vertical head rotation : +/- 90°. Head body rotation : +/- 180°. Vertical spindle speed : (2) 60 ÷ 500 |500 ÷ 3600 rpm. Motor : 400 V 50 Hz 2.25 kW. Distance between machine nose and table : Rodpsh Im H Ssfx Adaen 45 - 395 mm. Spindle-column axis distance : 215-450 mm. Table size : 1246 x 230 mm. Longitudinal table displacement : 850 mm. Transverse table displacement : 310 mm. Maximum load capacity : 400 kg. Dimensions : 1680 x 1500 x 2100 h mm. Net weight : 1000 kg.

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Redpfxoc Uydas Adaen Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), Ansemi parallel lathe, Mono FAP 325 ES type, distance between centres mm1500, centre height mm 325, bar passage mm65, motor power kw18, dimensions mm: 3300x1200x1700h weight kg3260 Redpjwcd Hmjfx Adasn

Condition: good (used), Digital read-out Rodpfx Adsw Nnuteaen With milling and drilling head Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Spindle diameter ----- 360 mm Rjdjga Ty Ejpfx Adasn Main spindle passage ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 KW Weight ----- 1000 kg INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 pockets * 3 Chuck 200 mm * 4 Chuck 200 mm * Clamping plate 250 mm * LED working light and cooling system * Fixed and moving glasses HEAVY DUTY VERSION WITH CAST IRON FRAME

Condition: excellent (used), SK 50 holders (28627) Various manufacturers: Bilz Kelch Sandvik Rodpfxewl U Tcs Adaon Clarkson Approx. 90 pieces

Condition: used, Details on request Rjdpfob E Evbjx Adajn

Condition: new, Type DC9030 Air delivery 3900 m³/h Inlet diameter 3x100 mm Fan diameter 300 mm Bag capacity 307 l Collector bag ø 480 × 4 3 phases Motor power 2.2 kW Rodjfiiwujpfx Adasn Weight 63 kg