Used Dowel Inserting Machine for sale (91,878)

Condition: used, Year of construction: 2025, functionality: unexamined, Envelope inserting machine / inserting system 0 KAS Mailmaster 465HS-4 – Year of manufacture 11/2016 / Location: 24589 Dätgen (Schleswig-Holstein) LSV1208 We are offering for sale an inserting system, as per the following: 0 KAS Mailmaster 465HS-4 from 11/2016. The inserting system has been dismantled and placed into storage. It was purchased on 17.12.2020 for a then price of €107,880.00. The machine is located in 24589 Dätgen (near Hamburg). Shipping within Germany is possible. Additional photos are available upon request. You are welcome to submit a price proposal. Reasonable counter-offers will be considered. When inquiring, please provide your complete contact details! Delivery can potentially be arranged for an additional fee. You are also welcome to inspect the unit onsite. Simply call to arrange an appointment. This item comes from insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. The sale takes place without any warranty. Liability, reduction, rescission are expressly excluded. Laodpfx Asw Urvrjb Ush We recommend an inspection prior to purchase, as the item is sold as seen. All information is given without guarantee. Subject to errors and changes. The item is sold as inspected onsite, in used condition, under retention of title, and with the exclusion of any warranty for visible and hidden defects, in particular defects of a technical, qualitative, or functional nature as well as usability. Due to time constraints, we will only respond to serious inquiries and price offers! This is an advertisement for informational purposes only. Viewing is only possible by appointment! Best regards

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2676, warranty duration: 6 months, year of last overhaul: 2024, Our refurbished SIMA 220 from PALAMIDES collects, counts, sorts, checks and packs your bulk mailings cost-effectively and reliably. At a speed of up to 28,000 items per hour, letters are transferred directly from an upstream inserting or addressing machine and deposited fully automatically into letter containers in accordance with postal regulations. The letter containers are automatically taken from a magazine, which can be preloaded with around 10 containers. Ledpfst A A Tpex Ab Ueah Save money with every operating hour Mail processing machines could often run faster if manual picking and sorting into letter containers were smoother and faster. With the SIMA 220, you have the opportunity to significantly speed up the entire processing and thus achieve a higher level of operational efficiency. Flexibly combined with any pre-machine The SIMA 220 can be quickly and easily adjusted to the height of your pre-machine and, in the event of a malfunction, the entire line can be stopped via a corresponding signal exchange. The integrated belt turner also ensures that letters from different pre-machines can be transferred and deposited in the letter container in accordance with postal regulations. Only the good ones get through Incidentally, the SIMA 220 also checks every single letter for the correct format and specifically rejects any that do not comply. This ensures that no incorrectly addressed envelopes or the like go through the post. Top quality at an affordable price The CUPASO price-performance promise also applies to this SIMA 220. Just because you choose a used machine does not mean you have to compromise on quality and reliability. Used machines refurbished by CUPASO are the only ones that come with a warranty. That's our promise to you Our full 6-month warranty promise also applies to this SIMA 220, of course. That means you're on the safe side. If anything breaks during this period, we will replace the defective part and install it at our expense (except for wear and tear, machine control and travel costs). Product size: DIN C6 - long Speed: 28,000 pcs/h Year of manufacture: 2013 Machine number: 2676 Condition: Workshop refurbished with warranty Warranty period: 6 months Machine location: CUPASO Showroom, DE-38110 Braunschweig Equipment: • Belt turner • Alignment section • 2 x defective product ejection • Total product counter and counter per container • Programme control via touchscreen • Magazine for approx. 10 DPAG letter containers • Display for four filled letter containers • Height adjustment of the machine • Mobile machine

Condition: used, Used machine Lsdpew I Uh Djfx Ab Usah Condition: Functionally tested Technical data: Fully automatic pneumatic sequence control (clamping-drilling-unclamping) by means of for each program separate start button for each program Drilling chip distance (hole center) min. 32 mm max 800 mm Distance between stop and drill hole row min. 10 mm max 550 mm Drill head 6 pieces Number of drilling spindles of the drilling head 2 pieces 2 motors 1.5 kW each Spindle speed 3000 rpm For horizontal and vertical construction drilling For vertical hole line drilling in 32 mm increments Vertical drilling unit with double spindle drilling heads freely positionable on index shaft 1.5 kW motor with 1400 rpm 1.5 kW motor with 2800 rpm Drill heads with pneumatic stroke Pneumatic material clamps Passage width approx. 850 mm Incl. various stops and drill bits Location: Röllbach Availability: short term

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Lasdpeqpdkcsfx Ab Ueh - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Condition: used, No. 3238 Dowel drilling machine Gannomat Combi RB 110 Used Precision universal dowel drilling machine for drilling holes in carcasses, frames, fittings and rows of holes in system 32 The table can be pneumatically swiveled 90° together with the drill beam Short workpieces can be inserted upright Easy drilling of pot hinges and connecting fittings Drilling of miter and flat frames Drilling from below Drilling of longitudinal and transverse friezes at the center stop Fully automatic pneumatic control with control panel Working width 800 mm Drill beam 23 spindles, Pitch 32 mm Drilling stroke 75 mm Position adjustment of drilling unit 0 - 60 or 110 mm Spindle speed 2800 rpm Shank diameter of drill bit 10 mm Maximum clamping height of workpieces 80 mm Motor 1.5 kW, 380 V Compressed air connection 6 bar Weight approx. 450 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Ljdpfew Id T Nex Ab Ujah Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Vitap Alfa35T dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction and for precise joints in interior design. It includes a stop for miter joints. drilling spindles: 35 division: 32 mm Lasdpfx Abow Ektlo Ujh Spindle distance: max. 1,090 mm drilling depth: adjustable up to approx. 65 mm Pivot: pneumatic

Condition: like new (used), Year of construction: 2016, We have a Pitney Bowes DI500/DI600 envelope inserting machine available. Year is 2016 and this machine has two A4 document feeders and one bookletfeeder. It can process from DL up to C5 envelopes. Of course you can multiple feed more documents per feeder per envelope. the machine is in excellent configuration and state. The original counter is 7.025 envelopes processed. So like new!! Laedpfx Abeflrc Rs Ush

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 6671C/6975C/6822C/6989D/6815C, warranty duration: 6 months, year of last overhaul: 2024, Müller online channel for connection to an inserting machine - collect, fold A4 single sheets - Condition: completely overhauled with guarantee (6 months) Consisting of: Laodpfx Absvdrx Ie Uoh - 1 x 6798 Autoloader (S/N: 64580) - 1 x 6686D-30K Feeder single sheet vacuum (P/N: 67159) - 1 x 6995 transfer unit incl. 6815 reading unit with large reading area (P/N: 69016) - 1 x 6671C Collecting tray straight ahead 11"-12" (P/N: 69695) - 1 x 6975C Distance module for RU100 (P/N: 69215) - 1 x 6822C Double folding machine upwards (P/N: 69755) - 1 x 6989D Transfer unit (P/N: 69086) - 1 x 6815C STOP function for transfer unit with blower (P/N: 69208) +++Refurbished appliance with 6 months warranty according to our enclosed warranty conditions +++ +++Installment purchase and rental possible on request+++

Condition: used, Used machine For drilling dowels into flat or end faces With roller-bearing drill shaft and conical claw coupling Driven by any hand drill Working width 650 mm With 7 drill shafts Pivoting drill beam 0° - 45° - 90° Clamping height 80 mm Lodow Nacijpfx Ab Uoah Minimum drill hole spacing 30 mm Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Ledpfxedi R R Rj Ab Usah Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_30, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Side holder with color boxes Lajdpowym S Hofx Ab Ujh TC12 touchscreen control 36 month guarantee

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Laodpfet Ndznox Ab Ujh Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing .

Condition: used, Year of construction: 2011, functionality: fully functional, We have here a Plockmatic DMI4000 envelope inserter module available. Year 2011 and counter is just 311.014 Laodpfx Abswzam Tj Ujh We do not have possible extra modules, like collating tower etc, which can be installed at this inserter module.

Year of construction: 2004, condition: used, Book mark inserting machine Sigloch LEH-3 Year: 2004 Description: - Inline production - Right hand infeed - Bookmark insert: 2 - Scissor - Delivery to the right - Bypass-system - Delivery to the right Sigloch: LEH-3 Book block format (max): 350 x 240 x 70 mm Max. mechanical speed: 60 cycles/min Lodpfx Aswutrcjb Uoah Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Laodpow Naa Uofx Ab Ueh Universal dowel drilling machine with drilling from below heavy cast iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any miter angle Drilling unit with digital positioning for 0-edge transfer, touch stops are used which transfer the tool thickness to the vertical bore during horizontal drilling to the vertical bore for hole line drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal passage max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles pitch 32 mm Spindle distance min. 32 mm Spindle distance max. 640 mm Space requirement L X W x H 960 x 630 x1140 mm Weight approx. 300 kg Availability: short term Storage location: Flörsheim

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 Lajdpfx Aegwbbqsb Ujh N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: good (used), functionality: fully functional, drilling depth: 45 mm, rotational speed (max.): 18,000 rpm, rotational speed (min.): 9,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 9,000 rpm, compressed air connection: 7 bar, input voltage: 400 V, working width: 1,200 mm, stroke length: 50 mm, height adjustment type: electric, input frequency: 50 Hz, mount diameter: 10 mm, power: 1.5 kW (2.04 HP), Dowel Hole Drilling and Insertion Machine SCHEER BS 5102 Lasdpfx Abewrnn Tj Ujh The BS 5102 is a high-quality, electronically controlled drilling and dowel insertion machine designed for precise end-face drilling operations and powerful dowel insertion. It is ideally suited for continuous industrial use in joineries, furniture, and cabinet manufacturing. Condition & Service: Condition: Completely overhauled & freshly painted Functionality: Fully operational Warranty: 12 months CE-compliant / dust tested Key Technical Data & Features: Workpiece width: 60 – 1200 mm (pendulum mode up to 600 mm) Workpiece thickness: 15 – 60 mm Vertical stroke: 7.5 – 50 mm Drilling depth: max. 45 mm Drill motor: 1.5 kW, adjustable 9,000 – 18,000 rpm Drilling system: M10 external (Scheer system) Clamping cylinders: 4 short-stroke angled clamping cylinders (Ø 63 mm) Voltage: 400 V, 50 Hz Glue system: 1:1 membrane pump, max. 7 bar Extraction connection: Ø 80 mm | Airflow: 540 m³/h Equipment & Operating Comfort: Drilling, dowel insertion, or both simultaneously—for maximum flexibility PLC-controlled glue quantity—precisely adjustable Controlled X-axis with linear guide, rack-and-pinion drive, and servomotor Drill motor, glue unit, and dowel insertion unit integrated as standard Adjustable drilling depth & dowel projection directly at the support Clamping portal with 4 adjustable clamping cylinders—for exact workpiece fixation Stop rulers on the left, right, and middle of the machine table Large support surface for safe and flexible workpiece guidance Control & Programming: Siemens PLC control with PC and WP-Studio software Operating system: Windows 10 Display: 17" color screen Dialog-oriented operation, graphically supported Automatic mirroring of workpiece programs (left/right) Programmable workpiece and glue data Optional Features: Electronic glue monitoring Inspection mirror for visual monitoring of the spiral conveyor Additional drill motor for face drilling upon request Warranty & Reliability: We are convinced of the quality and durability of our machines—that’s why you receive a 7-year warranty on the machine construction, particularly on the design and guide mechanisms. Electrical supply parts and wear parts are excluded. Summary: This machine combines precision, modern control engineering, and high build quality. Perfectly suited for operations prioritizing reliability, efficiency, and operator convenience. 📞 Contact us for an individual offer or to schedule a demonstration. Machine available from stock. Delivery, commissioning, and training available as options.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm Ledpfxsh U Damo Ab Uoah spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Used machine Laedpfow Nabxsx Ab Uoh Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Ledpfjd Nuwiox Ab Usah Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Lajdounvg Tepfx Ab Uoh Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Ledpfx Aev Nptmob Uoah Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual side adjustment

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION 21 drilling spindles with quick-change system; five quick-change chucks included in delivery Heavy-duty steel worktable; five quick-change chucks included in delivery Patented system for fast and easy adjustment of drilling depth via spiral disc Pneumatic drill head swiveling, allowing drilling in any position between 0° and 90° Fold-down cast iron side stops with round bar guide Side stops easily adjustable and lockable to millimeter scale using magnifier Height adjustment of drill head via counter Two positionable pneumatic clamping cylinders With a spindle center distance of 640 mm, it is possible to process two workpieces of 316 mm width each SCOPE OF DELIVERY Two pneumatic pressure cylinders Five quick-change chucks Two stop rails, each 1.5 m long Laedpfx Abew I Uqlo Ush Four fold-down stops for the stop rails One setting gauge for fine adjustment of the fold-down stops on the stop rails TECHNICAL DATA Dimensions and Weights Worktable length 885 mm Worktable width 332 mm Product length approx. 1015 mm Product width/depth approx. 990 mm Product height approx. 1270 mm Net weight approx. 260 kg Electrical Data Rated input power 1.5 kW Delivered power 1.1 kW Motor duty cycle S3 Connection voltage 400 V Mains frequency 50 Hz Noise Emission Sound pressure level 78.3 dB(A) Pneumatic Connection Working pressure 6 – 8 bar Spindle Maximum drilling width 640 mm Maximum drilling depth at 90°: 65 mm Number of spindles: 21 Spindle distance 32 mm Center distance first to last spindle: 640 mm Spindle spacing sufficient for two workpieces of 316 mm each Spindle speed: 2800 rpm Drill head swivel range: 0 – 90° Maximum workpiece height: 130 mm Extraction Extraction nozzle diameter: 80 mm Including optional accessories: 2 pcs. Additional pneumatic pressure cylinders for MDB 21/23/29 PRO 17 pcs. Quick-change chucks for MDB 21/23/29 PRO 1 pc. Setting gauge for rear fence distance for MDB 21/23/29 PRO 1 pc. Reference pin for line drilling for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Drill beam: 19 spindles Working width: 630 mm Gantry passage: 710 mm Lodjw Nac Nopfx Ab Ueah Drilling stroke: 120 mm Position adjustment drilling unit: 0-45 mm Hole row position adjustment: 0-150 mm Spindle speed: 2800 rpm Shank diameter of the drill: ø10 mm Clamping height of the workpieces max. 100 mm Motor: 1.5 kW, 380 V, 50 Hz Working height: 850 mm Compressed air connection: 6 bar Weight: approx. 310 kg Availability: short term Storage location: Baden-Württemberg

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Ljdpslk R Epofx Ab Uoah Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim