Used Double Circular Saw Waves for sale (17,676)

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service Dcjdpfx Aber Ikvue Ter - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Djdpfx Aboxnlgce Tjcr Storage location: Garbsen

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Double-shaft multirip saw Rema DMJB-200 Year of production: 2004 The machine is in very good condition, little used, complete with a chip extractor mounted from above. DTR documentation included. Technical data: - saw blade diameter: 350 mm - cutting height of wood: 25–200 mm - minimum thickness of finished slats: 8 mm - maximum spacing of outer saws: 280 mm - minimum length of material: 800 mm - main motor power: 2 × 45 kW - spindle speed: 3300 rpm - conveyor width: 300 mm - feed drive motor power: 3 kW - pressure roller drive motor power: 2 × 0.75 kW - extraction nozzle diameter: 2 × 200 mm - required extraction air volume: 2 × 3400 m³/h Dedpfsxyq Naox Ab Tjcr - table height: 850 mm - machine weight: 5500 kg

Condition: good (used), construction circular saw, circular saw Dedpfxjd R N Ine Ab Tscr -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm -Weight: 42 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Dsdoxwmckopfx Ab Tjcr Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1150 kg Dedpfx Ajxwfmneb Tjcr This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Application Types Sawing

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps Dodpetqmmdofx Ab Tscr - automatic disc covers - delivery device for long elements - safety gates

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm Dcodpfjwvl E Rjx Ab Tsr capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: excellent (used), Year of construction: 2000, Feed unit, circular saw feed device for panel saws For cutting slats, window scantlings, trimming ABS edging strips, etc. Mounting on the panel saw fence Motor 0.14 kW, 380 Volts Two feed speeds: 13 and 26 m/min Integrated electric safety magnet system secures the feed unit to the saw table via an electromagnet Quick adjustment of workpiece height via handwheel Rubber-coated feed rollers Maximum workpiece height approx. 80 mm Minimum workpiece length approx. 200 mm Dust extraction port Largely newly repainted CE mark Mounting rail dimensions: 41x21 mm, inner dimensions 31x11 mm, slot width approx. 14 mm Rail fits Altendorf, but also adaptable to many other panel saw manufacturers; additional adapter rails available from Panhans Weight approx. 30 kg Dsdoxlywwepfx Ab Tocr The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'more offers from this dealer.'

Condition: excellent (used), power: 4 kW (5.44 HP), Felder K 500 Professional – Professional Quality Panel Saw from Private First Ownership Manufacturer: Felder Group (Austria) Model: K 500 Professional Condition: Very good, from private use Operating hours: Max. approx. 10 hours Technical Specifications Motor power: 4 kW, 400 V three-phase Saw blade diameter: max. 315 mm Cutting height: up to 102 mm (at 90°) Dcodpfoxn Rvpox Ab Tor Cutting width with rip fence: 800 mm (full table width) Sliding table length: 2,050 mm Saw blade tilting: 0 – 45° Scoring unit: Pre-fitted / optional electric Ø 120 mm Working height: approx. 890 mm Extraction ports: Ø 120 mm (housing) + Ø 80 mm (saw blade guard) Weight: approx. 420 kg Dimensions: approx. 2,050 × 2,800 × 1,300 mm (with outrigger) ⚙️ Features & Highlights +Precise X-Roll sliding table – maintenance-free +Sturdy rip fence with fine adjustment +Robust cast saw unit for low-vibration operation +High-quality Felder construction – made in Austria +Very clean, well-maintained machine – nearly as new +Includes various tools and accessories Delivery & Condition +Machine is fully functional and ready for immediate use +Collection preferred; transport possible by arrangement +Inspection by appointment Summary: Solid, precise, and durable panel saw from a private owner – ideal for joiners, ambitious hobby woodworkers, or small workshops. VAT margin scheme applied.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Behringer Eisele VMS 350 Metal Circular Saw Manufacturer: Behringer Eisele Model: VMS 350 Metal Circular Saw Year of manufacture: 2023 Condition: used, very good. Maximum processing diameter (round) at 90°: 120 mm Maximum processing section (rectangular) at 90°: 170 x 100 mm Maximum processing diameter (round) at 45°: 120 mm Maximum processing section (rectangular) at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade thickness: 3 mm Bore diameter: 40 mm Adjustable saw blade speed: 17 rpm / 34 rpm Machine head swivels: 45-90-45-30° Total motor power: 1.4/1.9 kW Width: 900 mm Dimensions (L x W x H): 1050 x 900 x 1900 mm Dedpexwl Rtofx Ab Tscr Scope of delivery: - Documentation

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm Dcsdpoxycy Rjfx Ab Tor 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale First head fixed Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Dcjdpfx Abjxv Dfas Tor Weight kg 1550

Condition: used, Year of construction: 2010, saw blade diameter 315 mm dimensions of saw-blade 350 x 40 x 2,5 mm cutting diameter 90 mm capacity 90 degrees: flat 150 x 90 mm capacity 45 degrees: round rechts & links 90 mm capacity 45 degrees: flat rechts & links 105 x 90 mm Dedpfxjv Td Hve Ab Tjcr capacity 60 degrees: round 90 mm capacity 60 degrees: flat 75 x 70 mm cutting speed 33 / 66 m/min total power requirement 1,8 kW weight of the machine ca. 340 kg dimensions of the machine ca. 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions

Condition: ready for operation (used), REMA RESZEL CROSSCUT SAW, horizontal adjustment, swiveling arm up/down with counterweight, cutting assistance with power cable, ready for operation, 2.2 kW motor. Important: blade diameter 350 mm, table equipped with one roller at front and rear, very good condition, capable of cutting at virtually 4 angles. Radial arm saw DMNE 650/35. - CE certificate - Warranty and post-warranty service - Brand new machine TECHNICAL PARAMETERS: - Saw blade diameter: 350 mm - Max. cutting height: 95 mm Dedpfx Ajxx U Azob Tscr - Max. cutting width: 580 mm - Arm swivel angle in vertical plane: ±90° - Table swivel angle in horizontal plane: +90° - Table swivel angle in vertical plane: ±90° - Motor power: 2.2 kW - Spindle speed: 2920 rpm - Spindle end diameter: 30 mm - Extraction nozzle diameter: 80 mm - Air demand in extraction system: 550 m³/h - Machine weight: 180 kg

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm Dsdpswz Hygefx Ab Tscr max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: used, Felder K7X circular saw, good condition Subject to price changes, errors, misprints and typographical errors excepted. Dcjdpfx Abowzzico Tsr

Year of construction: 2014, condition: ready for operation (used), This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine. Application Types Sawing Dedpfxexvtyte Ab Tecr

Condition: excellent (used), Year of construction: 2010, Storti TGS 78, year of manufacture 2010 Dcodpfx Aboxx N Edj Ter

Condition: used, Year of construction: 2000, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm Djdpev Rrruefx Ab Tecr capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 / 30 / 45 / 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2449220206, cutting length (max.): 6,000 mm, Machine currently in use, but with very low operating hours. Everything functions properly, but the machine will require servicing to be in perfect condition. Air hoses need replacement, cylinders need to be adjusted, and lubrication should be scheduled. The blades are in good condition. The machine can be disassembled at any time and loaded for transport. A custom-made, closed wooden transport crate can be provided on request at an additional cost. More photos and videos available upon request. Dcjdpfxjxx Ayzo Ab Ter

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Dcodpfxewzzh Es Ab Tsr Subject to price changes, errors, misprints and typographical mistakes excepted.

Condition: used, Year of construction: 1995, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm Dedpovxlpvjfx Ab Tocr cutting speed 15 - 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: used, Format circular saw CMA2000 S315 2.5m, like new, standard equipment, 4 HP, 2500 mm cutting length, approx. 400 kg Dodjwzziiopfx Ab Tjcr Price changes, errors, and typographical mistakes reserved.

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm stroke 250 mm Djdevg R Rnjpfx Ab Tocr turning speeds 40 / 80 U/min capacity 90 degrees: square 75 mm total power requirement 1,0 / 1,4 kW weight of the machine ca. 250 kg dimensions of the machine ca. 600 x 700 x 1600 mm Features: - Coolant system - One-sided miter adjustment - Saw blade 275 x 2.5 x 40 mm - Machine base