Cold Circular Saw

MEP TIGER 350 SX

Year of construction: 1989, condition: used, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Ffsdpfxei Df D Ae Afnjt Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,6 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Ffodpfx Afsvrxnxjnet Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • Bending rail 30 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1991, operating hours: 17,500 h, Operating hours: 17,500, First registration: 26.06.1991_____Operating hours: approx. 17,500, Year of manufacture: 1991, ENGINE Max. output 81/110 kW/hp, Max. torque 373 Nm, 6 cylinders, 6.2 l MWM, 135-litre fuel tank, TRANSMISSION 40 km/h, HYDRAULICS 3 double-acting spool valves, PTO 540 / 750 / 1,000, front PTO, LINKAGE EHR – Electronic hitch control, quick-adjust front linkage, FRONT & REAR AXLE All-wheel drive, BRAKES Dual-circuit air brake system, TYRES 14.9 R26, 520/70 R38, DRIVER'S CAB Standard cab with suspended seat, OTHER Front loader brackets, cab protection bar, Storage location: none Fjdpfxjx Egq Ro Afnjft

Condition: good (used), functionality: fully functional, Year of construction: 2012, Hydraulic Swivel Bending Machine Ffedpfxoxr Eaqe Afnst Make: HOCHSTRATE Model: 3000/6 Year: 2012 Technical Data Manufacturer: HOCHSTRATE Model: 3000 x 6 Year of manufacture: 2012 Sheet width: 3040 mm Bending capacity: 6 mm (400 N/mm²) Stroke: 250 mm Motor power: 7.5 kW Dimensions: approx. L 4.8 x W 3.0 x H 2.20 m Weight: approx. 6.5 t Equipment • Controlled backgauge 100–1000 mm • Pneumatic upper tool clamping • Motorized bending beam adjustment • CNC-controlled crowning • Adjustable clamping pressure • Segmented gooseneck rail, H 130 mm • Bending rail 30 mm • Continuous sharp rail 45° • Operating manual All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2001, Sheet width: 2520 mm Sheet thickness: 4 mm Dimensions (LxWxH): 3150x805x1425 mm Fjdpfex Ift Ejx Afnoft Upper beam stroke: 250 mm Bending beam adjustment: 80 mm Machine weight approx. 3720 kg Accessories: - Foot switch - NC control - Electric backgauge - Sharp rail - Upper beam drive power: 2.2 kW - Bending beam drive power: 3.0 kW

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left Fodpfx Ajxab S Esfnjft - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg Ffodpfx Ajxaa A Nefnst range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: used, Year of construction: 1995, saw blade diameter 350 mm Ffodpevxlpvofx Afnet dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: good (used), Year of construction: 2013, Rectilinear lapping machine for glass polishing, ADELIO LATTUADA, type AL10M, Year 2013 Ffodsvy H H Sjpfx Afnst

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools Ffjdpfx Afexq Dfvonot