Used Dorstener Wire Works for sale (55,621)

Condition: used, Year of construction: 2000, table length 350 mm Ibjdpfsxmk Hlsx Afioc table width 220 mm ampere 18 A Control FANUC 18i

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses). Ibsdpoxn T Nrsfx Afiec

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Automatic paper hole-cutting machine. The device is designed for continuous operation and heavy-duty use. The machine features a 3:1, 4x4 mm square hole perforation tool. Additionally, it comes equipped with eight cutting tools for various hole sizes. After punching, the sheets fall onto a jogger at the end of the machine. Quick and easy change of perforation tools (5 min). Maximum sheet size for perforation: 550x500 mm, minimum: 150x150 mm. Power supply: 1.5 KW, dimensions: 2800x1200x1250 mm, net weight: 950 kg, gross weight: 1350 kg. Iodoxa D N Hepfx Afijbc

Condition: ready for operation (used), Year of construction: 2001, Immediately available from a small toolmaking workshop: Mitsubishi Wire EDM Machine Type FA 20 – S Advance Year of manufacture: 2001 Ibedsxn Rynspfx Afiec Table load / workpiece weight up to 1,500 kg Travel X/Y/Z: 500/350/300 mm Submerged (water bath) machine Automatic wire threading Complete accessories Price: EUR 4,000.— plus VAT ex location

Year of construction: 2007, operating hours: 37,000 h, condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2080 mm Machine weight 4450 kg Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Ijdpfx Afexmbvqjisbc Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 400 mm Workpiece Z 700 mm Workpiece weight 1500 kg Injection Unit Injection pressure 2/4/8/13 bar This 3-axis CHARMILLES Robofil 440 CC was manufactured in 2007 and features a robust design with a total system weight of 4450 kg when filled with dielectric. It can handle workpieces up to 1500 kg, with maximum dimensions of 1200 x 700 x 400 mm. Ideal for precision wire EDM processes, this machine offers a comprehensive control system with a TFT 12" screen. If you are looking to get high-quality EDM capabilities consider the CHARMILLES Robofil 440 CC machine we have for sale. Contact us for more information. Application Types EDM

Condition: like new (used), Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total length: 2,600 mm, total width: 2,340 mm, GF Machining Solutions CUT P550 Pro Year of manufacture: 2022 Ijdpfjxl Suujx Afisbc Uniqua Control Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Integrated Collision Protection (ICP) on all 5 axes Cutting speed of 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.10 to 0.33 mm (with WIRE100 option) Including Taper Expert option for 0.25 mm wire Including AC-Setup 3D option Including wire chopper option Including horizontal manual annealing option Including automatic central lubrication option Including active thermal stabilization option Including SparkTrack option Including iWire option Including kit for 0.10 mm wire Overall system dimensions: 2,600 x 2,600 x 2,340 mm Total system weight: 3,300 kg The machine will be cleaned, serviced, and fully tested for all functions by us upon order placement. You will receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 15 h, chain length: 71,000 mm, power: 2.2 kW (2.99 HP), INDUSTRIA 2 t, FEM/ISO 1Am/M4 - 5 m/min, low voltage control with 1 speed. Electric winch 2000 kg. Range of electric winches initially designed to meet the needs of the industrial sector. Applications: All lifting or pulling/hauling tasks Industry Construction and public works Integration into cranes, etc. Pulling/hauling heavy loads Conveyor belt tensioning Opening hatches Lifting sluice gates Ibsdpfxjxbbupe Afijc Stage and event industry...

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm Iedpfxowr Utio Afiobc dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Machinetype: wire nail press Make: WAFIOS Type: N41 Constr. year: 1987 diameter range: 1,8-3,4 mm Ibodpfjxnykpjx Afiec nail length: 13-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Ibjdpfxexnx Its Afisc Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test the machine under power. The price is ex works, without disassembly. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 Model: MV4800 Operating hours: approx. 7,166 hrs Application type: EDM wire cutting Machine type: Wire EDM machine Technical Data – Mitsubishi MV4800 General Information Isdsxnxmcepfx Afiobc Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over carriage: 1,020 mm Workpiece diameter: 505 mm Max. table load: 3,000 kg Worktable Outer length: 1,080 mm Outer width: 780 mm Price significantly reduced.

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg U+V-Axis +/- 21 mm Misc. accessories Isdpfexl A Aijx Afiobc MARCELS MASCHINEN AG

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Ibsdpswmw I Ssfx Afiec Viewable at our Semsales premises from mid-June.

Condition: used, Year of construction: 2001, Two lines available: Line 1 for hexagonal wire beads Ibsdpsxb U Agjfx Afioc Line 2 for square wire beads One line consists of bead winder, bead extruder and cooling line, carousel and loader robot + coil winding.

Condition: used, Year of construction: 2012, Wire EDM machine Mitsubishi BA 8, year 2012. Technical data available as PDF file. Ijdjxnqdyspfx Afisbc

Condition: used, Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: P0131I146, workpiece weight (max.): 1,000 kg, travel distance X-axis: 520 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, overall weight: 2,600 kg, Wire EDM machine in excellent condition with few operating hours, purchased used and refurbished directly by the official FANUC dealer. The machine is equipped with a chiller to maintain the working water temperature and comes with all the necessary equipment for machine setup. Ijdpfx Afjw N Tbrsijbc

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Ibsdpjxnpmgjfx Afioc

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Ibodpjw Swd Asfx Afioc

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Isdpfew N Tazex Afiobc

Condition: used, 700-1400 creels per line, pneumatic beaks Ibsdsxcnr Rjpfx Afijc

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Ibodpsxnpkxjfx Afioc

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 690 h, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 222 mm, total length: 300 mm, total width: 185 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, type of input current: three-phase, overall weight: 2,850 kg, Equipment: cooling unit, GF CUT E 350, year 2022. Machine like new, only 685 hours of operation (upgradable). Ibsdpfx Aovvld Iofioc Available in our Semsales workshop at the end of February.

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Ibjdpfxev Rbxwe Afijc Viewable at our Semsales premises in Switzerland.

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, empty load weight: 2,450 kg, GF CUT 200 MS, year 2012. Excellent condition, the machine will be cleaned, revised and tested. Iedpfevvlhyox Afiobc Option 0.1 mm. Available in our workshop in Semsales during March.

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Sold as is or revised on request. Isdpfx Afsv Im R Tjisbc Machine visible in our premises in Semsales in Switzerland.