Used Doosan Mega 250 V for sale (322)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Machine weight: 4,750 kg. Ijdpfsx Ryrhox Ah Njht

Condition: new, PUMA 5100XLC (2023. 10) 100% NEW Swing over bed: 870 mm Max. Turning Diameter: 650 mm Max. Turning Length: 3042 mm X axis: 362 mm Ihjdpfx Asx Rxv Sjh Njt Z axis: 3150 mm RPM: 1000 Spindle: 2-step gear type Spindle thru-hole diameter: 275 mm OPTIONS LIST - FANUC i Series + iHMI - SAMCHULLY MH-224 (24") - 1 Set of Hard Jaws - Tailstock Center Type: Dead Center MT5 - S/R Programmable Twin Type D45-310_SLU5Z - Long Boring Bar Holder - Coolant Pump 4.0kW / 1.45MPa - Coolant Pressure Switch - Coolant Chiller - Coolant Gun - Oil Skimmer - Mist Collector 2.2kW - 12-Station Turret - Right-Side Hinged Chip Conveyor - Bucket - Automatic Tool Setter - Air Gun - Air Blower for Chuck - Signal Tower - Auto Power Off - AICC 200 Block - Arbitrary Speed Threading - Re-machining Function - Threading Repair Function - Stored Pitch Error Compensation (Ball Screw Pitch Error Correction)

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Ihjdpfxjt H Nbus Ah Njt Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: good (used), Year of construction: 2008, Year: 2008 FANUC 0i Series Control Swing over saddle: 500 mm Bar capacity: 76 mm Spindle size: 315 mm (12″) Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Swing diameter: 630 mm Tailstock quill diameter: 100 mm Tailstock quill stroke: 100 mm Taper MT #5 Ijdpfxjx Rrf Tj Ah Njht Turret positions: 12 stations Driven turret speed: 5000 rpm Rapid traverse XZ: 20 x 24 m/min Spindle motor power: 22 kW Spindle nose: A2 #8 Spindle speed: 3500 rpm Boring bar holder diameter: 50 mm Tool dimensions: 25 x 25 mm X-axis travel: 242 mm Z-axis travel: 1100 mm Machine dimensions: 3418 x 1670 x 1735 mm Machine weight: 4700 kg

Condition: used, machine/vehicle number: 16786, Year of construction: 2021, operating hours: 1,918 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, construction height: 2,200 mm, fork length: 1,200 mm, overall weight: 4,800 kg, enginetype: Electric, manufacturer: Doosan Ihedpfx Aex Rk Elsh Net

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm Isdpjw Dkflofx Ah Nsht MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: good (used), Year of construction: 2018, THIS MACHINE IS NOW READY FOR SALE. IF YOU HAVE ANY QUESTIONS ABOUT THIS MACHINE, PLEASE CONTACT US BY PHONE (06-54667163). THE TECHNICAL SPECIFICATIONS WILL BE PUBLISHED ON THE WEBSITE BY JANUARY 5TH AT THE LATEST. The Doosan (now DN Solutions) Puma GT3100LM is a robust horizontal CNC turning center, specifically designed for heavy-duty machining and high productivity. The “LM” designation stands for an extended bed (Long) with driven tools (Milling). Why the Doosan Puma GT3100LM? This machine features the most powerful spindle in its class and offers a larger machining envelope than previous models. This makes the GT3100LM the ideal choice for workshops looking to efficiently machine medium to large workpieces with a high surface finish quality. Subject: Doosan Puma GT3100LM CNC Turning Center Year of manufacture: 2018 Machine number: ML0314-000104 Iedpfjx Rg U Ajx Ah Njht Standard accessories: (still being finalized) Fanuc i-series CNC control Options: · Automatic tool setter · Tool load monitoring · Chain-type chip conveyor · High-pressure coolant pump, 5 bar · Programmable tailstock

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, Ihsdpfjx I N Rbsx Ah Njt bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, Year of construction: 2011, operating hours: 6,682 h, 2011 | Doosan DX300LC | Used Tracked Excavator | 6682 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Ihjdpfxsx I Nnge Ah Nst 💰 Buy Now for EUR 52500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 62 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general condition of the excavator for its age. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39626 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Ihjdpfjx N S D Tsx Ah Not

Condition: used, Year of construction: 2017, operating hours: 14,421 h, Type of fuel: Diesel Empty weight: 12.860 kg Dimensions (LxBxH): 405 x 223 x 395 cm Lifting capacity: 9.000 kg Lift height: 510 cm Fork dimensions: 2.440 x 2.200 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes Ihedpfxox Iqcxj Ah Njt - CE certificate present: No - Serial number: FDB0X-2520-00135 - Operating hours: 14421 - Lifting capacity: 9000kg - Lifting height: 5100mm - Overhead clearance: 3920mm - Free lift: 0mm - Fork length: 2440mm - Maximum fork width: 2200mm - Minimum fork width: 570mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights, Heating, Full cabin, Radio, Camera - Mast: Duplex - Drive: Diesel - Motor brand: Doosan - Transport dimensions: 4050mm x 2230mm x 3950mm (l x w x h) - Transport weight [kg]: 12860kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2013, Please contact us for further information. Ijdpfx Ajx Nqg Hsh Noht

Condition: like new (used), Year of construction: 2005, functionality: fully functional, CNC Lathe DAEWOO PUMA 2000 SY. Swing diameter over bed: 600 mm. Maximum turning diameter: 330 mm. Maximum machining length: 510 mm. Bar capacity: 65 mm. X-axis travel: 250 mm. Z-axis travel: 580 mm. Y-axis travel: +50 - 50 mm. B-axis travel: 580 mm. Main spindle: 18.5 kW - A2-6" - 4,500 rpm. Subspindle: 7.5 kW - A2-5" - 6,000 rpm. Driven turret with 12 positions (BMT). FANUC 18iTB control (Manual Guide i). Chip conveyor. Tool presetter. Parts catcher with conveyor belt. In very good condition. Ihedpfx Ahjx I Srnj Net

Condition: used, Upper driven head with Y axis, lower driven head, twin spindles. Max. swing over bed: 300 mm. Max. swing over support: 230 mm. Max. swing over bed with upper head: 230 mm. Max. swing over bed with lower head: 230 mm. Max. turning length: 600 mm. Max. distance between the face of the right and left spindle: 980 mm. Milling range outside the turning axis via Y axis: 100 mm (+/-50 mm). Max. turned bar diameter (left spindle): 65 mm. Max. turned bar diameter (right spindle): 65 mm. Max. permissible workpiece weight without counter spindle (including chuck weight = 23 kg): 12 kg. Total weight: 7800 kg. Accessories: Feeder SS 2500, length 200-1525 mm. Isdpfxex Np U Aj Ah Noht

Condition: new, Year of construction: 2023, operating hours: 14 h, General information Year of manufacture: 2023 Field of application: Construction Technical information Number of cylinders: 6 Type of fuel: Diesel Empty weight: 14.700 kg Dimensions (LxBxH): 800 x 260 x 320 cm Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Damages: none EPA / CE Safety valves Hydraulic quickcoupler 6 cylinder Doosan engine Dozer blade Teethbucket Ihedetk Hg Uspfx Ah Net Reverse camera Airconditioning

Condition: used, Year of construction: 2007, turning length: 510 mm, turning diameter: 250 mm, overall weight: 4,000 kg, controller manufacturer: Fanuc, controller model: I Series, Turning diameter over bed: 250 mm Ihsdpex Nqwljfx Ah Njt Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle bore: 53 mm X-axis travel: 175 mm (160 plus 15 mm) Z-axis: 550 mm Spindle speeds up to 6,000 rpm Tailstock 12-position turret All 12 stations equipped with driven tools

Condition: good (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, controller model: Fanuc, Catalog No. : 7960 Type: DNM 4500 Producer: DOOSAN Made in: 2022 Characteristic: Control system: Fanuc Hours on: 2471 h Iodpfsuxcd Uex Ah Neht Length of the working table: 1000 mm Width of the working table: 450 mm X-Axis travels: 800 mm Y-Axis travels: 450 mm Z-Axis travels: 510 mm Machine weight: 5000 kg

Condition: used, Year of construction: 2017, operating hours: 6,150 h, Year of manufacture: 2017 Empty weight: 23.500 kg Iedpfx Ahettzmno Nsht Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,810 h, Year of manufacture: 2010 Drive: Wheel Empty weight: 5.550 kg Ihjdpfew Afrdsx Ah Nst Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 Iedjx Id D Aspfx Ah Neht FANUC touch control Specification: Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Isdpfxox Hy R Ns Ah Noht Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Ihedpfexxdmijx Ah Nst Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: good (used), Year of construction: 2014, spindle speed (min.): 2,500 rpm, Year of manufacture: 2014 Chuck diameter: 10" Number of axes: 3 Isdpfxex N A Ebo Ah Njht Swing over bed: 250 mm Spindle speed (rpm): 2500 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Ihodpfjxqfb Esx Ah Njt Digging depth: 4.88 m

Condition: used, Year of construction: 2017, operating hours: 7,830 h, Year of manufacture: 2017 Ihodpfxjx Hgtwj Ah Net