Used Doosan Generator for sale (262)

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Lajdoilfltspfx Apmjf Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Laedpfenkcaasx Apmef Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Lajdpfxjzul R Ie Apmof Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,477 h, spindle speed (max.): 3,500 rpm, total height: 1,863 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: I series, number of axes: 3, This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information. Additional equipment • Tool holders Ledpfx Aszvv Aqspmoaf • 2+2 driven tools • Automatic tool measurement • Oil catcher • Oil mist filter (Losma) Machine Benefits Technical Machine Benefits • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Maximum spindle speed: 3500 rpm Extra Information Machine still under power Dimensions Machine Depth 4600 mm

Condition: ready for operation (used), Year of construction: 2006, spindle motor power: 22,000 W, spindle speed (max.): 3,600 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, controller manufacturer: FANUC, number of axes: 6, This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. • Max turning diameter: 330 mm (12.99 in); upper turret: 390 mm • Max turning length: 500 mm (19.6 in) • Bar capacity (main spindle): 76 mm (2.99 in) • Travels: X 250 mm (9.84 in), Y ±50 mm (±1.97 in), Z 580 mm (22.8 in) Ljdpfx Apezvu Ufomoaf • Sub spindle speed: 6000 rpm • Sub spindle motor power: 7.5 / 11 kW • Notes: Series introduced mid-2000s

Condition: used, empty load weight: 3,000 kg, total length: 2,900 mm, lifting height: 5,500 mm, mast type: triplex, construction height: 2,900 mm, fork carriage width: 2,015 mm, load capacity: 10,000 kg, Triplex ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Lasdpfezvtzwsx Apmjf Description: DOOSAN lifting mast - - TRIPLEX free-lift mast with side shifter and fork positioner - - Overall height 2.90m - - Lifting height approx. 5.5m - - Lifting capacity 10 tons - - Fork carriage width 2.15 m - - Fork length 1.80m - - with 3-point hitch - - Own weight approx. 3 tons - - Age approx. 10 years - - Delivery is possible!

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ Lsdpfozvq Dpex Apmsaf --> Jaw pitch: 1/16" × 90°

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Lajdpfx Apjzvlnvsmef Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 762 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 0i-MC, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DOOSAN NM 410 was manufactured in 2007. It features a table size of 920 x 430 mm and impressive X-axis travel of 762 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed range of 20 - 8,000 RPM and a tool changer capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DOOSAN NM 410 vertical machining centre we have for sale. Contact us for further details. - CNC Control Operating Hours: 47,484 h- Automatic/Operating Time: 4,394 h- Feed Time: 10,336 h- Table Size: 920 x 430 mm- Spindle Speed Range: 20 - 8,000 RPM- Spindle Taper: SK 40 / DIN 40- Tool Changer Capacity: 24 positions- Power Connection: AC 220 V, 3-Phase, 50/60 Hz- Rated Power / Apparent Power: 36.87 kVA- Full-Load Current: 101.98 A- Interruption Current: 9000 A Technical Specification Taper Size SK 40 Ledpfozu Rx Dex Apmjaf

Condition: good (used), Year of construction: 2001, operating hours: 4,700 h, lifting height: 3,500 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, power: 115 kW (156.36 HP), motor manufacturer: Volvo, gearing type: mechanical, fork length: 2,400 mm, Weights Empty weight: 18.780 kg Functional Lifting capacity: 15.000 kg Maximum passing height: 390 cm Number of valves: 3 CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Lsdpfezv Hxiex Apmjaf Rear tyres remaining : 95 Forklift weight class: 15000 Fork type: 2400 Fork carriage: Positioner and spread Latest inspection: 2026-04-04 Production country: KR Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - 3rd valve - 4th valve - Heater - Pneumatic shaped solids - Roof window

Condition: excellent (used), Year of construction: 2009, lifting height: 3,540 mm, fuel type: diesel, mast type: duplex, power: 103 kW (140.04 HP), motor manufacturer: Doosan, gearing type: automatic, fork length: 2,300 mm, total height: 3,420 mm, total length: 4,800 mm, total width: 2,540 mm, color: other, Empty weight: 19.398 kg Engine type: Doosan DL06PA Lifting capacity: 16.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Pallet forks - Radio - Side shift - Work lamp(s) = Remarks = Lajdezv Dxgspfx Apmof Drivetrain Stage / Tier: Stage IIIA / Tier III General Country of production: Korea Hydraulic fork positioner with side shift, enclosed cab

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: FANUC, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 9,870 h, number of slots in tool magazine: 30, VC 430 - worked in 1 shift only. Still precise and well maintained over the years. We need space in december so machine has to go out. Lajdpfx Asv Acpuspmof

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, a very stable machine that operates without any issues – it is only used for machining aluminum plates. Laodpfx Apszmzcqsmsf

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW Lasdjvzln Rjpfx Apmjf weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a lifting capacity of 3,000 kg. Side shifter. Cab with 2 doors. Unladen weight 4,600 kg. Lifting height approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, work lights, fork length approx. 1.20 m. Windshield wiper, power steering, suspension seat, reversing warning, 4-cylinder engine. Detailed view of the vehicle // Detailed Walkaround of the Car: ?v=PknDsuzDiCo ==Daily purchase of commercial vehicles, trade-ins also possible== Laodpfx Aey S Ng Dspmjf Price 5,900.00 Euros § 25a UStG.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm Lodpfxoyiu Dns Apmeaf B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Max. turning diameter: 420 mm Max. turning length: 1285 mm Bar diameter: 102 mm Lasdpfxjzc Nzno Apmsf Z-axis travel: 1350 mm Y-axis travel: 130 mm X-axis travel: 293 mm TAILSTOCK Live center: SMW AUTOBLOCK - Chip conveyor included - Documentation

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Lajdpfxjvri I Aj Apmef Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891 Laedpfx Apoy Daf Iomjf

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Lodpfezvh D Tjx Apmsaf Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Laodpfx Aozvhz Ejpmof Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, Laedpfxszt Spno Apmjf 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total length: 2,250 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device Lodpfxevhpr Hs Apmjaf * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • CNC controls available: FANUC 31i-5, HEIDENHAIN iTNC 530, SIEMENS 840Dsl • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm (optional 20,000 rpm); ISO #40 7/24 BIG-PLUS (optional HSK-A63) Lsdpfx Apozt Rwqemeaf • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW; HEIDENHAIN 23.5/18 kW; SIEMENS 30/24 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N Lasdey E I Hijpfx Apmsf • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Technical Specification Counter Spindle No Driven Tools Yes