Used Doosan Hp 6300 for sale (262)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm Lsdpfx Aszh Hpfepmoaf • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, Lasdpfewq Iwxsx Apmef 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Laodex Sq Uvspfx Apmsf Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Lasdpfxevw Uyue Apmef Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For technical data, see images.... Lodpfx Apsy Tl N Romjaf

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: FANUC, spindle speed (max.): 20,000 rpm, spindle motor power: 37,000 W, number of axes: 4, This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details. • Rapid traverses • X/Y/Z: 60 m/min • Cutting feedrate: 1–30,000 mm/min • Ballscrews: Ø45 x P20 • Accuracy • Positioning: ±0.003 mm (full stroke) • Repeatability: ±0.0015 mm • Measurement system Ledpoy Tluaefx Apmoaf • X/Y/Z/B: absolute pulse encoders • Optional linear guides on X, Y, Z • Distances • Spindle nose to table center: 100–980 mm • Spindle center to pallet surface: 80–810 mm • Spindle • Speed: • Standard/high-torque: 15,000 rpm • High‑speed option: 20,000 rpm • Base speed: • Standard: 1,200 rpm • High‑speed option: 1,800 rpm • Motor power: • Standard: 30 / 22 / 18.5 kW • High torque option: 37 / 26 / 22 kW • High‑speed option: 37 / 30 / 26 / 18.5 kW • Max. torque: • Standard: 229.9 / 206.9 / 147.2 / 119.4 Nm • High torque: 303 / 261 / 204 / 147 / 119 Nm • High‑speed option: 221 / 200 / 156 / 98.1 / 79.6 Nm • Tool clamping force: 9.8 kN (15.7 kN with HSK spindle) • Transmission: Integrated drive • Axis motors • X: 5.5 kW (7.37 hp) • Y: 4.5 kW (6.03 hp) • Z: 5.5 kW (7.37 hp) • B indexing motor: 1.4 kW (1.88 hp) • B 0.001° motorized: 2.7 kW (3.62 hp) • B axis / rotary table • Indexing: 1° indexing; 0.001° rotary table • Positioning accuracy: ±3" (±6" for rotary table) • Repeatability: ±1" (±4" for rotary table) • Max rapid rotation: 30 rpm • Clamping force: 93 kN • Clamping torque: 4327 Nm • Pallet • Size: 500 x 500 mm • Type: Threaded pallet; T‑slot pallet • Pattern: 24‑M16 x P2.0; 5‑18H8 • Machine travels reference • X/Y: 28.74" • Z: 34.65" Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i Lasdpfoypb Srsx Apmsf X-axis 850 mm Y-axis 700 mm Z-axis 750 mm B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Lodezul R Iopfx Apmsaf Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,477 h, spindle speed (max.): 3,500 rpm, total height: 1,863 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: I series, number of axes: 3, This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information. Additional equipment • Tool holders • 2+2 driven tools Lasdpfjzvv Aqjx Apmef • Automatic tool measurement • Oil catcher • Oil mist filter (Losma) Machine Benefits Technical Machine Benefits • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Maximum spindle speed: 3500 rpm Extra Information Machine still under power Dimensions Machine Depth 4600 mm

Condition: ready for operation (used), Year of construction: 2006, spindle motor power: 22,000 W, spindle speed (max.): 3,600 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, controller manufacturer: FANUC, number of axes: 6, This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information. • Max turning diameter: 330 mm (12.99 in); upper turret: 390 mm Ljdszvu Ufspfx Apmoaf • Max turning length: 500 mm (19.6 in) • Bar capacity (main spindle): 76 mm (2.99 in) • Travels: X 250 mm (9.84 in), Y ±50 mm (±1.97 in), Z 580 mm (22.8 in) • Sub spindle speed: 6000 rpm • Sub spindle motor power: 7.5 / 11 kW • Notes: Series introduced mid-2000s

Condition: used, empty load weight: 3,000 kg, total length: 2,900 mm, lifting height: 5,500 mm, mast type: triplex, construction height: 2,900 mm, fork carriage width: 2,015 mm, load capacity: 10,000 kg, Triplex ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Ledpfxjzvtzws Apmjaf Description: DOOSAN lifting mast - - TRIPLEX free-lift mast with side shifter and fork positioner - - Overall height 2.90m - - Lifting height approx. 5.5m - - Lifting capacity 10 tons - - Fork carriage width 2.15 m - - Fork length 1.80m - - with 3-point hitch - - Own weight approx. 3 tons - - Age approx. 10 years - - Delivery is possible!

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm Ledpfezvq Dpox Apmjaf --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Lajdpfx Aszvlnvspmef Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 762 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: Series 0i-MC, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DOOSAN NM 410 was manufactured in 2007. It features a table size of 920 x 430 mm and impressive X-axis travel of 762 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed range of 20 - 8,000 RPM and a tool changer capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DOOSAN NM 410 vertical machining centre we have for sale. Contact us for further details. Laedpfx Aozu Rx Depmof - CNC Control Operating Hours: 47,484 h- Automatic/Operating Time: 4,394 h- Feed Time: 10,336 h- Table Size: 920 x 430 mm- Spindle Speed Range: 20 - 8,000 RPM- Spindle Taper: SK 40 / DIN 40- Tool Changer Capacity: 24 positions- Power Connection: AC 220 V, 3-Phase, 50/60 Hz- Rated Power / Apparent Power: 36.87 kVA- Full-Load Current: 101.98 A- Interruption Current: 9000 A Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2001, operating hours: 4,700 h, lifting height: 3,500 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, power: 115 kW (156.36 HP), motor manufacturer: Volvo, gearing type: mechanical, fork length: 2,400 mm, Weights Empty weight: 18.780 kg Functional Lifting capacity: 15.000 kg Maximum passing height: 390 cm Number of valves: 3 CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Forklift weight class: 15000 Lodpfx Aszv Hxiepmoaf Fork type: 2400 Fork carriage: Positioner and spread Latest inspection: 2026-04-04 Production country: KR Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - 3rd valve - 4th valve - Heater - Pneumatic shaped solids - Roof window

Condition: excellent (used), Year of construction: 2009, lifting height: 3,540 mm, fuel type: diesel, mast type: duplex, power: 103 kW (140.04 HP), motor manufacturer: Doosan, gearing type: automatic, fork length: 2,300 mm, total height: 3,420 mm, total length: 4,800 mm, total width: 2,540 mm, color: other, Empty weight: 19.398 kg Engine type: Doosan DL06PA Lifting capacity: 16.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Ledpfjzv Dxgox Apmsaf = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Pallet forks - Radio - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIA / Tier III General Country of production: Korea Hydraulic fork positioner with side shift, enclosed cab

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: FANUC, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 9,870 h, number of slots in tool magazine: 30, VC 430 - worked in 1 shift only. Still precise and well maintained over the years. We need space in december so machine has to go out. Laedpfx Aev Acpujpmsf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, a very stable machine that operates without any issues – it is only used for machining aluminum plates. Ledpfx Apezmzcqsmoaf

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW Lsdpfxsvzln Rj Apmsaf weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a lifting capacity of 3,000 kg. Side shifter. Cab with 2 doors. Unladen weight 4,600 kg. Lifting height approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, work lights, fork length approx. 1.20 m. Windshield wiper, power steering, suspension seat, Lsdpjy S Ng Dofx Apmoaf reversing warning, 4-cylinder engine. Detailed view of the vehicle // Detailed Walkaround of the Car: ?v=PknDsuzDiCo ==Daily purchase of commercial vehicles, trade-ins also possible== Price 5,900.00 Euros § 25a UStG.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Laedpfjyiu Dnox Apmjf Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Max. turning diameter: 420 mm Max. turning length: 1285 mm Bar diameter: 102 mm Z-axis travel: 1350 mm Y-axis travel: 130 mm X-axis travel: 293 mm TAILSTOCK Laedjzc Nznspfx Apmjf Live center: SMW AUTOBLOCK - Chip conveyor included - Documentation

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Lasdpjvri I Aofx Apmof Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system Ljdpfxsy Daf Is Apmsaf * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg Lajdpfozvh D Tex Apmsf A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.