Used Doosan Mega 250 V for sale (285)

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Dusdpfswtg Inox Ah Nou Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Dusdpfxswtg R Aj Ah Nju Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,714 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel Forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Solid rubber Dodpfx Ahoy U A Ndo Nouu Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: DOOSAN D25S diesel forklift - 2.5 ton lifting capacity - year of manufacture: 2012 - side shifter - TRIPLEX free lift mast - overall height: 2.17 m - lifting height: 4.80 m - 12,714 operating hours according to the meter - forklift with 4-cylinder YANMAR diesel engine, 49 HP - mechanical hydraulic levers - solid rubber tires front approx. 70%, rear approx. 50% - LED work lights front and rear - simple, mechanical forklift - good condition - front loader can be inspected on site - affordable delivery options!! Features: Side shifter, 3rd valve, rear work light, front work light, heating, full cab.

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,790 h, Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Dujdpjyn En Uofx Ah Neu Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,630 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Duedpfx Ahsxqfb Es Neu = Additional options and accessories = - Rubber tracks

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,800 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Duodpsx Hgn Usfx Ah Nou Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2023, Key Technical Specifications - Brand / Model: DN Solutions (formerly Doosan) PUMA GT3100L - Year of Manufacture: May 2023 - Serial Number: ML0313-000510 - Power Supply: AC 380V – 3 Phases – 50/60 Hz - Nominal Capacity: 36.11 kVA (Full Load Current: 54.87 A) - Machine Weight: 6,900 kg (Maximum rigidity and stability) - Compliance: CE Certified Duedpozbb Ikjfx Ah Nou What is this machine used for? The PUMA GT3100L is a heavy-duty, computer-numerical-control (CNC) horizontal turning center engineered for intensive machining of medium-to-large components. It excels at high-precision turning, facing, threading, and boring of high-value parts. This is the ideal production tool for demanding industrial sectors such as automotive, energy (oil & gas), hydraulics, and heavy precision mechanical engineering. How does it stand out from other models? - "L" (Long Bed) Configuration: Unlike standard compact variants, this long-bed version offers an extended turning length, allowing you to process long shafts and oversized workpieces without sacrificing structural rigidity. - Ultra-Robust 6.9-Ton Frame: Its massive cast-iron bed perfectly dampens vibration. This guarantees flawless geometric accuracy and significantly extends tool life, even during aggressive roughing cuts on hard alloys. - 2023 DN Solutions Generation: Benefiting from the manufacturer's recent rebranding and latest technological advances (formerly Doosan Machine Tools), this machine integrates modern electronics and high-efficiency motors (36.11 kVA), delivering an exceptional balance between high torque and energy efficiency.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828D, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle and a table size of 1300 × 570 mm, allowing for efficient machining operations. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm • Tool changer: 30 positions • High-pressure cooling • CNC control: Siemens 828D • Condition: Very good; regularly maintained Duodey Uki Sopfx Ah Neu Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Duedpfsyugvaox Ah Neu Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m Djdpfx Aheu U E Edo Nsuu The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST, Year 2012, Location: 78176 Blumberg Turning diameter: 760 mm Dodpfx Aheywax Ie Njuu Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Equipped with sub-spindle, lower turret, driven tools, and 80-position tool magazine. Hydraulic hollow chuck system 12-position lower tool turret with BMT 65 P Chuck air-blow system for spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on the sub-spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-stage clamping pressure for main and sub-spindle Automatic shutdown after production end Hinged belt chip conveyor 2 x power chucks 200 mm 1 x radial AGW 1 x axial AGW Extended high-pressure and paper band coolant system 80-position tool magazine Further information available upon request. Commissioning and training available on request.

Condition: repair required (used), functionality: fully functional, Year of construction: 2006, load capacity: 3,250 kg, lifting height: 3,290 mm, load center: 500 mm, fuel type: gas, construction height: 2,100 mm, power: 43.4 kW (59.01 HP), fork length: 1,400 mm, overall weight: 5,085 kg, Equipment: pallet forks, sideshift, We offer this used Doosan G33P-3 front loader forklift, year of construction 2006. Manufacturer: Doosan Infracore Co., Ltd. Country of manufacture: Korea Model: G33P-3 Serial number: KK-00234 Machine type: LP forklift Rated capacity: 3250 kg Rated load center distance: 500 mm Rated lifting height: 3290 mm Minimum closed mast height: 2100 mm Drive tire tread: 982 mm Capacity without attachment: 3110 kg Load center distance without attachment: 500 mm Maximum lift height without attachment: 4750 mm Capacity with attachment: 2885 kg Duedpfjza Em Iox Ah Nsu Load center distance with attachment: 600 mm Maximum lift height with attachment: 4750 mm Machine weight without attachment: 5085 kg Manufacture year: 2006 Power: 43.4 kW If you have any questions or need more information, feel free to send us a message or give us a call. The forklift truck is fully working and has side shift, however I believe a mast seal is faulty as the central mast lifts our of sync and this will need repairing.

Condition: excellent (used), Year of construction: 2018, operating hours: 10,500 h, functionality: fully functional, Control system Siemens 828D. Cooling threw spindle. Dsdpfx Aey Udbnsh Nsuu Including probes. X / Y / Z - 1020/ 540 / 510 mm Table 1300 x 610 mm Max. table loading 650 kg Spindle revolutions 12 000 rpm Machine dimensions 3200 x 2500 x 2500 mm Machine weight 6 500 kg

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Djdpfx Ahoy D Rypo Njuu Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: ready for operation (used), Year of construction: 2011, operating hours: 953 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: i-series, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details. • Capacity & Reach • Maximum turning diameter: ø 481 mm Dedpoy T Ndfsfx Ah Nouu • Maximum turning length: 1,280–1,310 mm (depending on the chuck) • Turning diameter above the bed: ø 780 mm • Bar bore/capacity: ø 76 mm • Main Spindle • Chuck (jack plate) diameter: 254 mm (10 inch) • Spindle bore: ø 86 mm • Spindle nose: A2-8 • Tool Changer • Turret: 12 stations • Rapid traverse (X/Z): 30 m/min Additional equipment • Note: Tools are excluded (can be purchased for an additional amount) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. Dujdpfey T I Snox Ah Nou • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment • Workpiece clamps, tools, and toolholders available at additional cost (not included) Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg Dedpfx Aezak Dxsh Nsuu

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,896 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,700 mm, total width: 1,628 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: i-series, product length (max.): 2,834 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 600 mm • Swing over saddle: 390 mm • Recommended turning diameter: 210 mm • Max. turning diameter: 300 mm Dedpfx Ahjy Tx S Sj Nsuu • Max. turning length: 513 mm • Bar working diameter: 65 mm • Spindle nose: ASA A2-6 • Spindle bearing diameter (front): 110 mm • Spindle through-hole diameter: 76 mm • Minimum spindle indexing angle (C-axis): 0.001° • Number of tool stations: 12 • OD tool size: 25 mm • Boring bar diameter: 40 mm • Indexing time (1st swivel time): 0.15 s • Rotary tool spindle speed: 5,000 rpm • Rapid traverse (X-axis): 24 m/min • Rapid traverse (Z-axis): 30 m/min • Quill diameter: 80 mm • Quill bore taper (live): MT4 • Quill travel: 80 mm • Electric power supply: 30.43 kVA Additional equipment • None specified (no robots, automation or bar feeder listed) • Tools excluded; available at additional cost Technical Specification Driven Tools Yes Counter Spindle No

Condition: used, Year of construction: 2007, turning diameter 300 mm Dodpfx Aey Tplioh Neuu turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For technical data, see images.... Dsdey Tl N Repfx Ah Neuu

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: FANUC, spindle speed (max.): 20,000 rpm, spindle motor power: 37,000 W, number of axes: 4, This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details. • Rapid traverses • X/Y/Z: 60 m/min • Cutting feedrate: 1–30,000 mm/min • Ballscrews: Ø45 x P20 • Accuracy • Positioning: ±0.003 mm (full stroke) • Repeatability: ±0.0015 mm • Measurement system • X/Y/Z/B: absolute pulse encoders • Optional linear guides on X, Y, Z • Distances • Spindle nose to table center: 100–980 mm • Spindle center to pallet surface: 80–810 mm Dujdoy Tluaepfx Ah Nsu • Spindle • Speed: • Standard/high-torque: 15,000 rpm • High‑speed option: 20,000 rpm • Base speed: • Standard: 1,200 rpm • High‑speed option: 1,800 rpm • Motor power: • Standard: 30 / 22 / 18.5 kW • High torque option: 37 / 26 / 22 kW • High‑speed option: 37 / 30 / 26 / 18.5 kW • Max. torque: • Standard: 229.9 / 206.9 / 147.2 / 119.4 Nm • High torque: 303 / 261 / 204 / 147 / 119 Nm • High‑speed option: 221 / 200 / 156 / 98.1 / 79.6 Nm • Tool clamping force: 9.8 kN (15.7 kN with HSK spindle) • Transmission: Integrated drive • Axis motors • X: 5.5 kW (7.37 hp) • Y: 4.5 kW (6.03 hp) • Z: 5.5 kW (7.37 hp) • B indexing motor: 1.4 kW (1.88 hp) • B 0.001° motorized: 2.7 kW (3.62 hp) • B axis / rotary table • Indexing: 1° indexing; 0.001° rotary table • Positioning accuracy: ±3" (±6" for rotary table) • Repeatability: ±1" (±4" for rotary table) • Max rapid rotation: 30 rpm • Clamping force: 93 kN • Clamping torque: 4327 Nm • Pallet • Size: 500 x 500 mm • Type: Threaded pallet; T‑slot pallet • Pattern: 24‑M16 x P2.0; 5‑18H8 • Machine travels reference • X/Y: 28.74" • Z: 34.65" Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2006, turning length: 305 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 5,000 rpm, quill diameter: 65 mm, quill stroke: 80 mm, bar passage: 51 mm, FANUC i Series control system Turret with 12 stations Duedpjy S U Dhsfx Ah Nsu (non-driven) Tailstock Chip conveyor Bar feeder IEMCA BOSS 545/32 E

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Duodoy St Sdspfx Ah Neu Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Dsdpeyfh Ixofx Ah Njuu Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Dedsyfh H Uopfx Ah Nsuu Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*