Used Disk Hacking for sale (674)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Möglingen
18,609 km
Die-cutting machine
TRUMPFTC 2000 R
Call
Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm
Y working area max.: 1270 mm
Control: Bosch Type 3 Basic
Standard equipment:
- Robust C-frame
- Safety light barriers
- Coordinate guide with integrated linear magazine
- 2 clamping claws
- Automatic tool changer
- Automatic repositioning
- Tool length compensation
- Forming capability
- Mono tool holder with 360° rotation for all tools
- Programmable hold-down device
- Multitool drive
- Punch slug extraction
- Brush tables
- Part chute 200 x 200 mm, sorting of parts into 2 containers
- NC-controlled, digital, maintenance-free three-phase drives
- Network interface RJ34
- 3.5" floppy disk drive
Fpsdpfoxxbdlex Ag Dor
- TOPS 2000 graphical programming
- Online diagnostics via modem
- Operating manual
+ Vibration-damped installation
+ Multitool
+ Thread forming
+ Start post
Listing
Waldlaubersheim
18,616 km
Laser cutting machine
TRUMPFTruLaser 3030 L49 4KW Fiber
Call
Condition: used, functionality: fully functional, Year of construction: 2015, Machine
- Enclosed machine frame
- Automatic pallet changer in longitudinal direction
- Torque drive in combination with linear direct drives
- Enclosed beam guidance using fiber optic cable (LLK)
- Machine cooling unit (water-air)
- Integrated control cabinets with interior lighting
- Power supply to TruDisk via the machine
- Longitudinal conveyor belt
- Work area lighting
- Positioning laser diode
- Oil spray device
- PierceLine
- FocusLine
- NitroLine
- PlasmaLine
- Automatic nozzle cleaning
- Transport and assembly device
TRUMPF Laser
- Solid-state laser TruDisk with 1 fiber optic output
- Laser cooling unit (water-air)
- Excitation via pump diodes
- Laser power control
Cutting Unit
- Universal cutting unit with fully adaptive lens system
- Single cutting head strategy
- Protective glass against lens contamination
- Protective glass condition monitoring
- ControlLine: height control and sheet metal edge detection
Control
- Advanced workshop programming (TruTops via network access)
- Fast repeat production
- 17" touch color screen
- Integrated technology data
- Automatic shut-off
- Programmable selection of cutting gas/pressure
- ContourLine
- Microweld
- FastLine
Fpedpfsxw Uryox Ag Der
- FlyLine
- AdjustLine
- Teleservice via Internet
- Integrated e-shop
Data Transfer
- USB interface
- RJ-45 network socket
Safety
- CE marking
- Light barriers
- Multi-chamber extraction system
- Compact dust extractor
- Machine enclosure with certified viewing window (right door)
- Roll-up roof
Special Equipment:
• 3001 on TruDisk 4001
• Extended pallet extraction
• Dust protection device panel
• Viewing window left
• Side viewing windows right
• Storage interface
• Brightline Fiber
• Titanium cutting package
• Brass cutting package
• Copper cutting package
• Nozzle changer
Listing
Walton-on-the-Naze
18,725 km
Horizon SPE-DEX 4790 Extractor
HorizonSPE-DEX 4790
Call
Condition: used, This listing is for 1 of 2 Horizon SPE-DEX 4790 Extractor
SPE-DEX 4790 is the only extractor system ever designed to handle both clean and particulate laden environmental samples such as:
Fpjdpfx Aexzhtleg Djr
Ground water
Waste water
Drinking water
Solid-waste water
Process water (influent and effluent)
Fresh and sea water
The SPE-DEX 4790 Extraction System features:
Bench-top operation freeing up valuable hood space
Modularity for up to (8) extractors to be connected simultaneously to one PC
Interchangeable 47 mm and 90 mm SPE disk holders
Automatic sample bottle rinse (3)different solvents
5-Conditioning solvents
Prewritten validated methods included
Uses original sample bottle

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Hornberg
18,706 km
Automatic lathe
CitizenM32
Call
Condition: used, Year of construction: 2007, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32 model was produced, which has the following main features:
Maximum turning diameter: 32 mm (optional 38 mm)
Maximum turning length: 320 mm per clamping operation
Maximum drill diameters (front): 12 mm
Fpodpfx Asvz Atdeg Der
Maximum tapping size (front): M12 (with cutting tap)
Main spindle speed: up to 8,000 rpm
Rear spindle speed: up to 8,000 rpm
Number of tools: maximum 25 to 27
Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm
Weight: 4,300 kg
This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in manufacturing.
Listing
Rattelsdorf
18,433 km
Knife grinding machine
WEINIGRandamat 168
Call
Condition: ready for operation (used), functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168
Fodjufcnqspfx Ag Djpr
Max. tool diameter 3500mm
Disk diameter 150mm
Tool length 240 mm
Main cutting edges up to 25°
Motor 1, 1 kW
Discover more used machines
Listing
Coesfeld
18,497 km
Vacuum tank truck
MERCEDES-BENZArocs 2851 Wiedemann Super 1000, Recycler
Call
Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,720 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++
Mercedes Arocs 2851 6x2-4 Wiedemann Super 1000 8.0/4.0/1.0-320, water reclaimer
superstructure
* Wiedemann enviro tec
* Super 1000 8.0/4.0/1.0-320 Water recycling
* 15,000 liter tank size
* 500 liters of fresh water
* 4,000 liters of rinsing water
* 8,000 liters sludge volume
* Emptying by tilting the tank 45°
Vacuum system
* Wiedemann & Reichhardt KW 4000
* approx. 4,000cbm/h
* approx. 25m suction hose DN 150
High pressure system
* Uraca P3-45-65 with approx. 413 liters/ at 175 bar
* approx. 180m HP hose DN 32
* Hydraulic flushing hose reel with approx. 80m DN 13
Additional fresh water system
* Speck NP 25/50-150 with approx. 50 l/min at 150 bar
* Spring-loaded reel with 15m DN 10 pressure hose
Fjdpfsvh H Rtsx Ag Djpr
Special features
* Sludge tank made of material 1.4301
* Suction and HP boom retractable (300mm shorter)
* Attachment point for fall arrester
* 5 liter hand washing device warm
* Stainless steel tool box
* Control cabinet with display
* Motor start can be switched from the control cabinet
* NMV - start switchable from control cabinet
* Radio remote control with display
* Equipment cabinet with two roller shutters - on both sides
* Large heated closet with roller shutters
* Hose storage
* Sound insulation of the pump room raised
* LED work lights
* Central lubrication system
Technical data
* Unladen weight 19,505 KG
* GGW 26,000 KG
* Length 10,170 mm
* Height 3,720 mm
* Width 2,550 mm
Special equipment:
Axle load - measuring device, Axle load front axle 9.0 t, Audio system: Digital radio DAB / DAB+, Exterior mirrors right with maneuvering position, Battery 220 Ah, Cockpit multimedia interactive, Electrical pre-installation in cab 24V / 100 A, Driver assistance system: High beam assistant and cornering light, Driver assistance system: Traffic sign recognition, Cab: Cab access movable, Suspension: Front springs 9.0 t, 4 leaf, Remote online function, Fzg. without trailer brake, vehicle without trailer coupling, speed limiter system, transmission 16-speed - type: G 280-16, transmission lock independent of transmission, rear axle disk wheel 300, mudguards 3-piece, mudguards 3-piece with splash guard, fuel tank: 510 ltr. aluminum, right, cool box / refrigerator, cooling capacity for hot climate zones, reinforced engine brake, trailing axle 9 t steered, can be unloaded, navigation system, power take-off - smooth flange, power take-off independent of transmission and clutch-dependent MB 1.2, power take-off MB 131-2c, parameterizable special module, wheelbase variant 4200 mm, frame overhang 1650 mm, rain sensor, reversing alarm acoustic and hazard warning light (warning signal outside), key with remote control additional (2), automatic circuit breaker, seat cover / upholstery: Velour front passenger seat, Seat cover / upholstery: Velour driver's seat, Seats in cab: Armrests on both sides of front passenger seat, Seats in cab: Swivel front passenger seat comfort, Seats in cab: Driver's seat comfort suspension seat, Exterior sun visor, Additional 12 V socket, 24 V / 25 A socket in front passenger footwell, Additional 24 V socket in front passenger footwell, Preparation for 4 surround view cameras (display in on-board monitor), Preparation for auxiliary headlights, Twin-plate clutch, Oil cooler transmission
For more detailed information and/or pictures, please contact us directly.
You can find a large selection of other vehicles to BUY or RENT under:
Subject to changes, prior sale
Listing
Burghaun-Gruben
18,455 km
Road sweeper
MERCEDES-BENZActros 2032 A 4x4 Bucher STKF 9500 Airport 30x
Call
Condition: used, mileage: 28,870 km, power: 235 kW (319.51 HP), first registration: 03/2006, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, For vehicle inquiries, Mr. Seidel is happy to assist you (by phone). ---- Mercedes-Benz Actros 2032 A 4x4 Sweeper ---- * !!! 30 units available !!!
* Large sweeper for airport runways
* 1st owner - German Armed Forces
* Very good condition----
* ADI all-wheel drive 4x4 with reduction gear
* AL5 front axle 9.0 t
* AM3 rear axle H7 13.0 t
* A70 front axle differential lock
* BB0 anti-lock braking system (ABS), switchable
* BB1 Telligent brake system with ABS
* BB6 drum brakes on FA and RA
* B43 trailer brake, 2-line
* B65 heated air dryer
* CR5 reinforced frame head for special attachments
* C42 stabilizer, rear axle, underframe
* C63 steel bumper
* D25 roof hatch/ventilation flap in roof
* EC6 trailer socket, 15-pin
* ES8 additional socket 24 V/15 A, cab railing
* ET1 voltage converter 24 V/12 V, 8 A
* EV2 preparation for CB radio
* EV5 preparation for telephone, fax
* EX8 preparation for toll detection material, Toll Collect
* FE5 electric window lifters, driver and passenger doors
* FE6 cab access, movable
* FS2 wide-angle mirror, driver's side, heated
* FZ7 immobilizer with transponder
* F05 M-cab
* F24 straight cab rear wall
* F52 external sun visor, transparent
* GS7 Telligent shift II
* GV2 transfer case VG2400 - 3W, 2-speed
* H03 air conditioning
* IA1 4x4 wheel arrangement
* ID1 leaf suspension
* IF2 MPII series
* IL1 domestic (Germany)
* IR6 wheelbase 4500 mm
* IV2 20-tonner
* IX6 V-engines, 6 cylinder
* I73 tubeless tires, 315/80 R 22.5 RA
* I76 tires, 385/65 R 22.5 FA/VLA/NLA
* JN0 tachograph, 1 day + 2 drivers, modular
* K68 exhaust silencer(s) vertical, behind cab
* K81 fuel pre-filter, heated water separator
* L58 revolving warning light, yellow
* MD9 cruise control
* MS3 engine spec, Euro III
* MV1 engine, V6, LA, 235 kW (320 hp), 1800 rpm
Fpedpfx Agowtaawo Der
* M32 additional air compressor
* M49 tandem air filter system
* N53 rear engine output for hydraulic pump
* N55 transmission oil cooling
* QD4 parabolic spring, 9 t - 10.5 t, for winter service
* QE8 rear spring, 13.0 t
* Q90 omission of trailer coupling
* RA9 steep shoulder rims 11.75x22.5 FA
* R04 wheel nut cover
* R38 steep shoulder rims 9.00 x 22.5
* SF1 functional seat, velour, passenger
* SH1 driver comfort suspension seat, Grammer
* TN3 weight variant 21.5 t (10.0/13.0), winter service
* Z38 airfield service vehicle
* Tire tread: 1st axle 10-12mm, 2nd axle 7-13mm----
* Superstructure: Bucher STKF 9500
* Container 9.5 cbm
* Water tank 1500 L
* Side disk brushes left and right
* Separate engine for superstructure 205 KW / 279 hp
* Sweeping width suction nozzle 2,300 mm
* Sweeping width disk brushes and suction nozzle 3,400 mm
* Blower system 4x blower nozzles
* Water pump with spray hose 10 bar
* Front attachment plate with municipal hydraulics for snowplow or other front attachments
On request, we can provide you with a leasing or financing offer.
Mr. Seidel (Phone) will be happy to assist you.
For more information, visit our homepage.
!!! Errors, changes, and prior sale excepted !!!
Listing
Wöllstadt
18,539 km
Pad printing machine B
TAMPOPRINTHermetic 130 Tampoprint B
Call
Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022.
The systems are already dismantled and ready for delivery.
Fjdpfx Aoxqgk Ueg Dopr
The HERMETIC series can be used both as a manual workstation and integrated into automated processes. As a manual workstation, the machine impresses with its numerous settings and high pressing force; in automated applications, it stands out particularly due to its cam control, ensuring a smooth and stable printing process. Its absolute highlight is its drive mechanism: both the up and down movement of the printing pad and the forward and backward movement of the pad printing cliché are controlled by a cam disk.
Listing
Walton-on-the-Naze
18,725 km
Sysmex XT-1800i Automated Hematology Analyzer
SysmexXT-1800i
Call
Condition: used, This listing is for a Sysmex XT-1800i Automated Hematology Analyzer
This system is complete, with PC and software disks.
Fpodpfxoxzgxae Ag Der
Designed to be reliable and efficient, the Sysmex XT-1800i offers medium volume laboratories an automated hematology system that can truly meet and exceed their expectations. The XT-1800i provides CBC and differential analysis using the same technologies as the other analyzers in the Sysmex XT-Series and XE-Series lines. Body fluid samples, including CSF, serous fluid and spinal fluid, are analyzed for RBC and WBC counts. A 6-part WBC Differential, including enumerated immature granulocytes (IG% and #), is optional for laboratories who need to reduce smear reviews. The XT-1800i streamlines your workflow by providing testing for up to 80 samples per hour, enabling rapid turnaround time.
Listing
Hornberg
18,706 km
Automatic lathe
CitizenM32
Call
Condition: used, Year of construction: 2013, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32V model was produced, which has the following main features:
The special feature of this machine is the open storage
Maximum turning diameter: 32 mm (optional 38 mm)
Maximum turning length: 320 mm per clamping operation
Maximum drill diameter (front): 12 mm
Maximum thread size (front): M12 (with cutting tap)
Main spindle speed: up to 8,000 rpm
Rear spindle speed: up to 8,000 rpm
Number of tools: maximum 25 to 27
Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm
Fjdpfjvz Azbsx Ag Dspr
Weight: 4,300 kg
This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in production.
Listing
Crailsheim
18,538 km
Panel van
Mercedes-BenzSprinter 317 CDI Kasten LED,Klima,Kamera,Automat
Call
Condition: used, mileage: 4,250 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 10/2024, emission class: euro6, color: white, suspension: steel, number of seats: 3, fuel: diesel, Equipment: air conditioning, airbag, central locking, navigation system, onboard computer, power assisted steering, seat heater, sliding door, soot filter, E07 Hill-Start Assist, JA7 Blind Spot Assist, T55 Electric Operation for Right Sliding Door, EY5 Mercedes-Benz Emergency Call System, F1K Coat Hook in Driver’s Cabin, EY6 Breakdown Management, G43 9G-TRONIC, L65 Ceiling Light(s) Cargo/Passenger Compartment with Door Contact, RS3 Steel Wheels 6.5J x 16, JK5 Instrument Cluster with Color Display, Z1N N1 Registration, LG7 LED High-Performance Headlights, XO9 Mercedes-Benz MobiloVan with DSB and GgD, M94 Vehicle Without EU Speed Limitation, XG7 Without Load Increase/Reduction 3,500 kg, IR6 Wheelbase 4325 mm / Overhang 1615 mm, HH2 Electric Auxiliary Heater, T75 Grab Handles for Driver and Passenger Entry, T77 Grab Handle in Load Compartment Sliding Door on Partition, E1E Digital Extra: Hard Disk Navigation, HH9 Semi-Automatic TEMPMATIC Air Conditioning, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start/Stop Function, 805 AEJ X4/1, ES0 Jump-Start Connection, D03 High Roof, E1U USB Socket 5V, F49 Heated Windscreen, FM3 WET WIPER SYSTEM, T85 Entry Handle at Rear Left Pillar, HI1 Climate Zone 1 (Cold/Comfort), T86 Entry Handle at Rear Right Pillar, RM0 All-Season Tires, V43 Wooden Floor, V42 Lashing Rails on Sidewall at Waist Rail, XY5 Model Year 5, C6L Multifunction Steering Wheel, LA2 Light Assist, ZM0 Panel Van, LA1 High-Beam Assist, ET4 Active Distance Assist DISTRONIC, IT4 3.5-Tonner, J55 Seat Belt Warning for Passenger Seat, H16 Seat Heating for Driver, J58 Seat Belt Warning for Driver’s Seat, H15 Seat Heating for Passenger, MT5 EMISSION CLASS EURO 6e RDE5 N1, W73 Rear Door Step, ED4 AGM Battery 12V 92Ah, FF5 Overhead Storage Above Windscreen, JF1 Rain Sensor, T16 Right Sliding Door, LB1 Side Marker Lights, We are available by phone Monday - Friday until 8:00 p.m. and Saturday until 4:00 p.m.!
Further details:
Leasing/financing and trade-in available!
Fpsdpsxy Hn Ssfx Ag Der
Errors and prior sale excepted!
All information provided without guarantee ... more on our homepage
Listing
Zeithain
18,208 km
Panel van
Mercedes-BenzSprinter 315 CDI Kasten Klima Sitzh. Schwingsitz
Call
Condition: used, mileage: 59,670 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2023, emission class: euro6, color: white, suspension: steel, number of seats: 3, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, AI1 rear axle control code, ring gear 215, L65 ceiling light(s) in load/driver's cab area with door contact, RS3 steel wheels 6.5 J x 16, Z1N N1 registration, XO9 Mercedes-Benz MobiloVan with DSB and GgD, VC4 lashing rails on side wall at roof frame, L71 cargo area lighting with motion detector, XG7 without increase/reduction 3,500 kg, IR6 wheelbase 4,325 mm, overhang 1,615 mm, T75 grab handles for driver and passenger entry, T77 grab handle at sliding door in partition wall, E1B storage tray for smartphones incl. wireless charging, W54 rear doors, double-winged, opening up to side wall, E1E digital extra: hard disk navigation, HH9 TEMPMATIC semi-automatic air conditioning, E1D digital radio (DAB), Y10 first aid kit, MJ8 ECO start-stop function, ES0 jump-start contact, D03 high roof, ES5 instrument panel charging package, FU5 exterior mirrors without turn indicators, MS1 cruise control, T85 boarding handle on rear left corner post, HI1 climate zone 1 (cold/comfort), T86 boarding handle on rear right corner post, RM0 all-season tires, V43 wooden floor, V42 lashing rails on side wall at waist rail, C6L multifunction steering wheel, LA2 automatic headlamp control, ZM0 panel van, IT4 3.5-tonner, J55 seatbelt warning for passenger seat, H16 seat heating for driver, J58 seatbelt warning for driver seat, H15 seat heating for passenger, MT6 emission class Euro 6d N1, L13 fog lights with cornering light, XZ0 model generation 0, V52 loadable wheel arch, W73 rear door step, VV2 load-securing rail system, ED4 fleece battery 12 V 92 Ah, FF5 storage above windscreen, FF4 storage compartment above roof lining, ED8 electrical pre-equipment, parameterizable special module, T16 partition. You can reach us by phone Monday to Friday until 8pm and Saturday until 4pm! Further information: Leasing/financing and trade-in possible! Subject to prior sale and errors! All information without guarantee ... more on our homepage.
Fpodpfx Ajxcfy Eog Dor
Listing
Burghaun-Gruben
18,455 km
Standard tractor unit
MERCEDES-BENZArocs 1845 LS 4x4 HAD Retarder Hydraulik Navi
Call
Condition: used, mileage: 532,559 km, power: 330 kW (448.67 HP), first registration: 02/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, navigation system, parking heater, If you have any questions about the vehicle, please contact Mr. Seidel (tel. ).----
Mercedes-Benz Arocs 1845 LS 4x4 HAD tractor unit---- * 2-circuit tractor unit hydraulics
* A0A Two travel sensors, on the rear axle
* A1C Front axle 7.5 t
* A1H Hydraulic Auxiliary Drive (HAD)
* A1Y Front axle, straight version
* A2E Rear axle, ring gear 440, hypoid, 13.0 t
* A5C Axle ratio i = 2.733
* B1B Electronic braking system with ABS and ASR
* B2A Disc brake, on front and rear axles
* B3H Secondary water retarder
* B4L Compressed air tank, aluminum, complete
* C1R Wheelbase 3600 mm
* D0A Leather steering wheel
* D0U Smoke detector, in the driver's cab
* D1D Driver's suspension seat, air conditioning
* D1N Passenger's functional seat
* D2Y Seat belt control
* D3B Comfort bed, bottom
* D3K Seat cover, Dinamica, black, driver's seat
* D3M Mattress, PremiumComfort, bottom
* D3T Seat cover, velour
* D4Z Sun blind, side, driver and passenger side
* D5B Ambient lighting
* D6G Automatic air conditioning
* D6I Residual heat utilization
* D6M Hot water auxiliary heating, driver's cab
* D7A Thermal insulation, additional
* D7J Drawers, under bed
* D7K Drawer, under parapet
* D7Y Luggage rack, top on rear wall
* D8M Electric sliding/tilting roof, glass version
* E6Z Reversing alarm
* E7F Cable remote control for air suspension
* E9I Preparation for switch, lifting axle, semi-trailer
* F0T Mercedes star, illuminated
* F0Y Mirror cover, Construction vehicle
* F1E L-cab StreamSpace, 2.30 m, tunnel 170 mm
* F3B Driver's cab suspension, comfort, steel-sprung
* F3W Driver's cab tilting device, mechanical-hydraulic
* F4H Driver's cab rear wall, without window
* F5B Air deflector, lockable, with end edge flaps
* F5Y A-pillar trim
* F6D Windscreen tinted, with band filter
Fodpfx Aju Ddd Tsg Djpr
* F6I Front mirror, heated
* F6L Main mirror, with maneuvering position, passenger side
* F6Q Air horn
* F7B Bumper, steel corners
* F7D Bumper, middle section, towing eyes, coupling jaw
* F7T Door extension
* F7X Driver's cab entrance left/right, rigid
* F8B 2 remote control keys
* F8E Locking system, with central locking
* F8F Comfort locking system
* G0R Gearbox support arms, optimized for expansion
* G0W off-road driving program
* G2E gearbox G 281-12/14.93-1.0
* G5A single-disk clutch
* G5G Mercedes PowerShift 3
* H2B fifth wheel lead +550 mm
* I2G tubeless tires, 315/80 R 22.5 VA/VLA/NLA
* I2H tubeless tires, 315/80 R 22.5 HA
* I6X air suspension, rear axle
* J2D radio/navigation system Bluetooth, comfort
* J2K loudspeaker, 2-way system
* J2Z CB radio, 12 V
* J3H on-board unit (OBU), installation+activation ex works
* J3J FleetBoard vehicle computer new with DTCO driver card
* J3Z axle load measuring device
* J9D preparation for toll collection
* J9L preparation FleetBoard for J3J
* K0T main tank, left
* K2P tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum
* K3V AdBlue tank 60 l, left
* K5M tanks, lockable
* K7B exhaust system, outlet below, fanned out to the right
* L1A bi-xenon headlights
* L1H fog lights, halogen
* L1P LED taillights
* L3A work lights, below
* L3Z headlight cleaning system
* M0C lower shell, to prevent dust from being stirred up
* M0S noise encapsulation, according to ECE
* M3B engine OM471, R6, 12.8 l, 330 kW (449 hp), 2200 Nm
* M5L engine version Euro VI, version 2
* M5V High Performance Engine Brake
* M6M air compressor, two-stage, consumption-optimized
* M7
Listing
Tönisvorst
18,574 km
Face plate
Call
Condition: excellent (used), Face plate and clamping disk
(2858)
Diameter 440 mm
Fpsdpfx Agotup Tro Dsr
Camlock mounting 133.4
Cone diameter 106.39
Height of face plate 50 mm
Weight 28 kg
Listing
Borken
18,513 km
Industrial robots six-axis robots
StäubliTX90 L + CS8C + SP1
Call
Condition: excellent (used), Stäubli
Type: TX90L Robot / CS8C Controller
Six-axis robot with controller
The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications thanks to their compact, slim design. Thanks to three mounting options: floor, wall, and ceiling, the six-axis robots are easy to integrate.
Fjdpfx Ajwbqwcog Dopr
The fully encapsulated design (IP 65) enables use in clean rooms
or under aggressive environmental conditions.
Features
Fully encapsulated design with internal supply lines
Rigid structure
Multiple mounting options
Patented Stäubli JCM gear modules
Long reach
Advantages
Perfect component protection.
Standard version in clean room class ISO 5.
Easy to clean.
Excellent dynamic path behavior
High flexibility
Precision, dynamics, and speed with reduced maintenance requirements
Optimal use of the workspace
Technical specifications
TYPE TX90L
Number of degrees of freedom: 6
Nominal payload: 6 kg
Maximum payload: 15 kg
Reach: 1200 mm
Repeatability: ±0.035 mm
Protection class (wrist) IP65 (IP67)
Mounting options: Floor / Wall / Ceiling
Stäubli CS8 CS8C controller
Features
Ethernet, fieldbus, digital inputs and outputs, serial interfaces
Easy to integrate, 19-inch rack version, protection class IP20
All connections on the front
Proven digital technology
Advantages
Open architecture
Compact
Good accessibility
Reliable
Technical specifications:
Type CS8C
Dimensions (H x W x D)
331 x 445 x 455 mm
481 x 445 x 455 mm
Protection class IP20 (IP54 optional)
RAM 64 MB RAM (min.)
Storage capacity 128 MB (min.) Flash disk and USB port
System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language
Communication Serial interface RS232/422, Ethernet, ModBus/TCP server
Type: Robot TX90L / Controller CS8C
Condition: Used
Scope of delivery: (See image)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
Listing
Germany
18,491 km
Edge sanding machine
WegomaKS 2600 FU
Call
Condition: used, Year of construction: 2013, Used machine
Year of manufacture: 2013
Features and technical specifications:
- Belt dimensions: 2600 × 200 mm
- Worktable: 935 × 460 mm
- Auxiliary table at belt tensioning roller: 350 × 350 mm (with round sanding attachment)
- Sanding spindle with rubber rollers, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm
- Oscillation (can be switched on/off), electromechanical with separate, maintenance-free oscillation motor
- Table height adjustment via handwheel, additionally adjustable relative to the sanding belt (forward and backward)
- Sanding unit tiltable from -10° to 90°, pivoted via handwheel with digital angle display
- Precise angle accuracy ensured by mechanical locking of the sanding unit
Fpodpfx Aoxwz I Iog Dsr
- Motor power: 2.2 kW
- Belt speed: 15 m/s
- Feed console with 3-roller feed and veneer device
- Quick changeover from veneer to solid wood sanding
- Height-adjustable idle disk table with adapter for dust extraction at the belt tensioning roller
- Large-dimensioned mitre fence with stepless angle adjustment and movable ruler
- Extraction: adapters Ø 100 mm on both sides (idle disk table, right and left extraction hoods)
- 2 sockets 400 V on the machine base (for machine and feed unit)
- Torsion-resistant, solid steel base for high running smoothness and stability
- Large worktable with sliding surface
- Recess in machine base for pallet truck for easier internal transport
Dimensions: 1700 x 1000 x 1100 mm
Weight: approx. 415 kg
Availability: approx. mid-April 2026
Location: Hesse
Listing
Hardthausen am Kocher
18,573 km
Laser cutting machine
TRUMPFTrumatic L 3030 - 4 kw
Call
Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE:
TRUMPF Trumatic L 3030 - 4 kw - Year 2006
TECHNICAL DATA:
Make: TRUMPF
Type: L 3030 - 4 kw
Year of manufacture: 2006
Working area: 3,000 x 1,500 x 115 mm
Control: Siemens Sinumerik 840 D
Laser power: 4,000 watts
Max. Sheet thickness mild steel: 20 mm
Max. Sheet thickness stainless steel: 15 mm
Max. Sheet thickness aluminum: 10 mm
Operating hours: NC
Machine regularly serviced by TRUMPF!
Transmitter tube: new 2024
TASC laser control: new 2022
Driver stage: replaced 2018
Magnetic bearing electronics: new 2016
STANDARD EQUIPMENT:
- Closed machine frame with integrated laser unit
Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower,
mirror telescope, cooling unit, logbook function
- Automatic pallet changer
- Longitudinal conveyor belt for small parts/waste
- Drives: maintenance-free three-phase servomotors
- Cutting head quick-change device
- Laser cutting head with 5" lens and laser cutting head with 7.5" lens
- Programmable cutting gas pressure setting
- APC capacitive height control and process control
- AutoLas Plus automatic focus position adjustment
- Laser power control
- Position laser diode
- HI-LAS high-pressure cutting
- Fast processing with SprintLas
- ContourLas for the production of small holes
- PMS plasma sensor technology
Fjdpfx Ageuthz To Depr
- Automatic sheet edge detection
- Programmable power cycles
- Microweld
- Automatic switch-off
- Work area lighting
- Sinumerik 840D control system: open control system on PC basis, simple operation, online help,
integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice
- Workshop programming ToPs 100 lite
- Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated,
monitoring system, multi-chamber extraction and compact dust extractor, protective cabin
- 3.5" floppy disk drive
- TFT color screen
- Electrical equipment: Voltage 400 V / 50 Hz
- Paint finish: Standard RAL 9002/5010
EXTENDED EQUIPMENT:
- TLF 4000 laser incl. lens monitoring sensors
- PCS Process Control System
Listing
Ahaus
18,488 km
Lathe-conventional-electronic
BERNARDOCOMPACT 400 - ES 12 V
Call
Condition: new, turning length 850 mm
turning diameter 400 mm
swing diameter over bed slide 245 mm
spindle bore 52.0 mm
turning speeds 45 - 1800 U/min
bed width 260 mm
spindle taper DIN 55029 D 1-5
taper in tailstock 3 MK
quill travel 120 mm
total power requirement 3.0 / 4.5 kW
weight of the machine ca. 1255 kg
range L-W-H 1900 x 1000 x 1610 mm
Equipment:
- 3-axis digital display ES-12 V with LCD display
- 3-jaw chuck PS3-200 mm / D5
- Clamping disk 320 mm
Fodpexaaxwsfx Ag Djpr
- Fixed steady rest - passage diameter max. 130 mm
- Follow-on steady rest - passage diameter max. 100 mm
- Coolant system
- Quick-change tool holder with 4 inserts
- Protective device for quick-change tool holder
- Micrometer longitudinal stop
- Slip clutch
- Motor with magnetic brake in accordance with CE standard
- Initial filling with Shell Tellus 46
- Extendable chip tray
- LED machine light
- Change gears
- Reduction sleeve
- 2 centering points
- Chip rear wall
- Operating tool
Listing
Geisenheim
18,603 km
Beer filling line 8.000 bph
RICO, ICS, SYSCONA
Call
Condition: used, Depalletizer and Palletizer – Flema Star C-LC
For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right.
Crate Unpacker – RICO UNO 1-Head Type 124
For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation.
Bottle Cap and Cork Remover – ADELSKI Type PPE 2005
For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation.
Fpjdexyt Npepfx Ag Der
Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact
For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175.
Bottle Inspection – SYSCONA LC 10 FD
Caustic control + metal detection, Year: 2007.
Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6
For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation.
Labelling Machine – ANKER Roland 8/3
For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation.
Inkjet Printer – Keyence MK-G1000
Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3.
Crate Packer – RICO UNO 1-Head L-Machine
For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation.
Premixer – Jakü PM-E-30-2k
For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992.
Crate Washer – RICO 2500 1-Bath
For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation.
2 CIP Tanks, each 6 hl
Steam-heated for filler CIP, with disk change system, Year: 2012.
Listing
Borken
18,513 km
Industrial robot
StäubliTP80 TP Picker + CS8C
Call
Condition: used, Stäubli
Type: TP80 robot / CS8C controller
Four-axis robot with controller
The Staubli TP80 robot is a 4-axis SCARA robot,
It offers a 0.5 kg payload and 800 mm reach.
The repeatability of the Staubli TP80 robot is 0.05 mm
and the weight of the robot is approximately 71 kg.
Common applications for the Staubli TP80 include:
Assembly, material handling.
Staubli TP80 TP Picker / 4 axes
Features:
Maximum payload 1 kg
Nominal load 0.5 kg
Reach 800 mm
Number of degrees of freedom 4
Working range:
Working range axis 1 (A) ± 117°
Working range axis 2 (B) ± 153°
Stroke (C1, C2) 100 mm
Working range axis 4 (D) ± 500°
Working range:
Max. Max. reach between axes
1 and 3 (r.M) 800 mm
Min. reach between axes
1 and 3 (r.m1) 174 mm
Cycle time, with continuous use and 25° C
Cycle 25-300-25 mm to (ppm = picks per minute)
Load capacity 0.1 kg 200 ppm
Load capacity (0.5 kg) 185 ppm
Load capacity (1 kg) 170 ppm
Cycle 50-700-50 mm up to (ppm = picks per minute)
Load capacity 0.1 kg 110 ppm
Payload 0.5 kg 105 ppm
Load capacity 1 kg 95 ppm
Repeat accuracy ISO 9283 < ± 0.05 mm
Maximum inertia (axis 4) 0.014 kg.m²
Weight 71 kg
Power supply 24 VDC - 2A
Clean room class - ISO 14644-1
Features: Stäubli CS8C controller
Ethernet, fieldbus, digital inputs and outputs, serial interfaces
Easy to integrate, 19-inch rack-mount version, protection class IP20
Fpjdpsu H An Aefx Ag Dsr
All connections on the front.
Dimensions (H x W x D)
331 x 445 x 455 mm
Protection class IP20 (IP54 optional)
Working memory 64 MB RAM (min.)
Memory capacity 128 MB (min.) Flash disk and USB port
System/programming language VAL 3 (multitasking-capable interpreter language), PLC-IEC 61131-3 language
Communication Serial interface RS232/422, Ethernet, ModBus/TCP server
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Listing
Geisenheim
18,603 km
Kieselgurfilter 3sqm
Della ToffolaECP 3 Druckausführung
Call
Condition: used, Filter area: 3 m2
Installed power: 2,45 kW
Horizontal disk filter with manual discharge system
This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts.
The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose.
The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied.
Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame.
Fjdpfx Agjxyt A Ne Depr
Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer.
Electric panel complete with every control and safety device required for safe, dependable operation.
Trust Seal
Dealers certified through Machineseeker

Listing
Borken
18,513 km
Industrial robots six-axis robots
StäubliTX90 L + CS8C + SP1
Call
Condition: excellent (used), Stäubli
Type: Robot TX90L / Controller CS8C
Six-axis robot with controller
The high-performance robots in the TX90 series for medium payloads offer the highest possible flexibility for many applications thanks to their compact, slim design. Thanks to the three mounting options - floor, wall and ceiling - the six-axis robots are easy to integrate.
The completely encapsulated structure (IP 65) enables use in clean rooms
or under aggressive environmental conditions.
Features
Completely encapsulated structure with internal supply lines
Rigid structure
Multiple mounting options
Patented Stäubli JCM gear modules
Long range
Advantages
Perfect protection of the components.
Standard version in clean room class ISO 5.
Easy to clean.
Fpsdpfxsvx Tbts Ag Der
Excellent dynamic path behavior
High flexibility
Precision, dynamics and speed with reduced maintenance effort
Optimal use of the work space
Technical data
TYPE TX90L
Number of degrees of freedom 6
Nominal load capacity 6 kg
Maximum load capacity 15 kg
Range 1200 mm
Repeatability ±0.035 mm
Protection class (wrist) IP65 (IP67)
Mounting options floor / wall / ceiling
Control Stäubli CS8 CS8C
Features
Ethernet, fieldbus, digital inputs and outputs, serial interfaces
Easy to integrate, 19-inch rack version, protection class IP20
All connections on the front
Proven digital technology
Advantages
Open architecture
Compact
Good accessibility
Reliable
Technical data:
Type CS8C
Dimensions (H x W x D)
331 x 445 x 455 mm
481 x 445 x 455 mm
Protection class IP20 (IP54 optional)
RAM 64 MB RAM (min.)
Storage capacity 128 MB (min.) Flash disk and USB port
System/programming language VAL 3 (multitasking interpreter language), language PLC-IEC 61131-3
Communication Serial interface RS232/422, Ethernet, ModBus/TCP server
Type: Robot TX90L / Controller CS8C
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data, information is subject to change!)
We will be happy to answer any further questions you may have over the phone.
Listing
Borken
18,513 km
Marking laser PowerLine Pico
RofinCombiLine Basic WT
Call
Condition: excellent (used), Rofin
Type: PowerLine Pico 532 - 10 CombiLine Basic WT
VLM - Visual Laser Marker
VLM is an innovative, flexible marking software that is used on Rofin laser systems.
laser systems. VLM follows the WYSIWYG concept and offers the flexibility of a
the flexibility of powerful yet easy-to-use software.
VLM can be used to apply markings of various types such as matrix codes, barcodes and serial numbers,
barcodes and serial numbers. Depending on the material, even the smallest
markings are possible. The innovative software ensures reliable marking of
reliable marking of flat and curved surfaces, and οη-the-fly
applications are also possible.
Common formats such as DXF or optionally PDF are supported for importing layouts.
Technical data of the laser:
Laser head
Wavelength: 532 nm
Power: approx. 3W at 400 kHz
Pulse frequency: 200-800 kHz,
Beam quality: TEMoo
Energy per pulse: 7.5 μJ at 400 kHz , 3.5 μJ at 800 kHz
Peak power: 7.5 kW at 400 kHz
Dimensions: approx. 450 mm X 168 mm X 235 mm (L X W X H)
Weight: approx. 14 kg (with standard Galvo RM10)
19" supply unit
Dimensions: 2HEx19''x350 mm(HxWxD)
Weight: approx. 20 kg
Cooling: integrated air cooling
Supply voltage: 115 - 240 V +/-10%50 ا Hz / 60 Hz
Power consumption: approx. 800 W
Ambient temperature: 15°- 35°C, non-condensing
Air flow rate: 80 m³/h
PC
Mini-ΙΤΧ
SSD removable disk 250 GB
Software
at least VLM 5.2
Windows Embedded Standard 7
Other options
19" panel can be removed
Positioning aid
Adjustable 3-foot support
The following components were additionally selected
from the standard scope of delivery:
Ρ255-532 lens ٢= 255 mm: 532 nm
Labeling field 180 mm X 180 mm
S10-532 Galvo head unit S10: 532 nm
Galvo head S10 including selected objective, holding set for optics and protective
protective glass or protective glass slider.
Size: approx. 165 mm X 118 mm X 147 mm (L X W X H)
Weight: approx. 4.4 kg
CombiLine Basic (V2):
Fpjdpfotz Rk Hsx Ag Djr
The CombiLine Basic is a user-friendly laser class 1 system (in accordance with EN
60825-1 ), which, thanks to the use of largely preconfigured functional
preconfigured function modules, enabling optimum adaptation to customer-specific requirements.
The frame contains all control components and functional elements.
functional elements. An aluminum plate with standard or customer-specific
workpiece holders, an aluminum plate with a standard drilling pattern serves as the basis.
The fully automatic, electrically operated door enables workpieces to be loaded and unloaded.
The machining area can be viewed at any time through the large observation window.
A programmable z-axis, including control and motor, is included as standard,
is used for vertical focus adjustment.
This takes place in automatic mode according to the specifications of the marking program.
Technical data:
Dimensions: approx. 1200 mm X 1750 mm X 800 mm (W X H X D)
Door opening: approx. 560 mm X 680 mm (W X H)
Weight: max. 380 kg
Connection: 230V+/-10%: 1/Ν/ΡΕ
Power: max. power consumption 3 kVA
Monitor: 15" TFT with touch function
Z-axis: max. 300 mm stroke
Workpiece:
max. 20 kg Weight (incl. holder)
max. 690x 490x 293 mm (W x L x H)
Listing
Borken
18,513 km
Laser system with Laserline diode laser
LDM 500-60 und Lascon Controller LPC03
Call
Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller
Here we offer a Lascon laser system with Lascon Controller LPC03.
Laserline diode laser
The diode laser 'LDM 500-60 ' has a wavelength of
of 935 nanometers and an output power of 550 watts.
Laser type: LDM 500-60
wavelength of 935 nanometers +-10%
Laser power: 550 W
Mains voltage 100-264V +- 10%
Max.power input 1,7 kw
Frequency 1 phase 47-63 Hz
Type: LDM 500-60
Lascon Controller LPC03
Fsdpfx Aedux Dusg Djpr
The LPC03 has the power of a complete PC in a very small space.
Instead of a hard disk a removable flash disk was installed.
Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of
for tasks in the field of measurement and control in industrial environments.
The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device.
The fiber optic cable is then simply connected to the rear panel.
The housing also offers space for the PCI card PCI-1P.
In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk.
Technical data:
Motherboard: Half size CPU card
Slots: 1 x PCI, length max. 180mm
Drives: none
Storage medium: exchangeable flash disk
Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear.
Housing: 212mm X 80mm X 250mm ( height X width X depth )
Protection class:Front: IP40
Environment: 15°C - 40°C
Ty
Listing
Borken
18,513 km
Digital scanning electron microscope
ZeissDSM 962
Call
Condition: excellent (used), ZEISS
Type: DSM 962
The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage and drives for external storage of data and images.
hard disk for internal image storage and drives for external storage of data and images.
This makes it possible to quickly and easily gain insights into the composition and morphology of
morphology of specimen surfaces far into the sub-micrometer range. With
magnification range from 5x to 300,000x, both macrostructures and microstructures can be examined.
as well as microstructures is possible.
The range of applications can be extended considerably by adding special accessories, allowing, for example
analytical investigations in micro areas of the surface are possible.
Fpjdpfjfcwwnox Ag Dor
The device can be operated both via conventional switching elements and via the keyboard or mouse (add-on).
or mouse (add-on). Electron optics and vacuum control are conventional. Functions of the
Image memory functions are operated using the keyboard or mouse (add-on). A separate information screen is located centrally on the
separate information screen for displaying the menus.
These operating instructions are intended as a guide to help the user achieve the best possible results with the device.
results with the appliance. The explanations have been kept as simple as possible so that even a less experienced user
less experienced users the necessary tools.
Magnification range: 20x to 300,000x at 7 mm working distance
Stages in a sequence of 1-2-3-5-10
Minimum magnification: 5x at 50 mm working distance
Resolution:
4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, untipped specimen
25 nm - guaranteed with tungsten cathode at 1kV, 6 mm working distance, untipped specimen
3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, untilted specimen
Scope of delivery: (DSM 962 with accessories as shown)
Condition: used
(Subject to changes and errors in technical data and specifications)
Please ask about transportation options before purchasing.
We will be happy to answer any further questions you may have over the phone.
We make it easier for you to find: "disk hacking"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Disk Hacking (674)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
















































































































































































































