Used Disk Hacking for sale (663)

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition Bedpfolqadhjx Abbewh

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Technical data: Hopper opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pcs + 2 pcs Type and size of knives: concave / 40 x 40 mm, reversible knives concave / 30 x 30 mm, scraper knives Screen perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Included: Control cabinet (Rittal) incl. 5 m cable Electrical control system (Moeller / Siemens) Bjdpfx Aevymdwobbjwh Star-delta start, rubber vibration dampers E-rotor with machined knife pockets Gearbox limit switch 1st knife row Hold-down device on slide for long and large parts Special scraper knives to prevent lateral jamming Weight: 1100 kg Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2005, cutting diameter 220 mm Bedpfx Abet Hxayebswh band length 425 mm cutting lenght max. 2500 mm total power requirement 0,95 kW weight of the machine ca. 219 kg dimensions of the machine ca. m

Condition: used, cutting diameter 320 mm capacity 45 degrees: round 180 mm capacity 90 degrees: square 320 x 320 mm capacity 45 degrees: square 180 x 180 mm strokes per minute 40 - 57 - 80 - 115 1/min cutting speed 16 - 22 - 31 - 45 m/min dimensions of saw-blade 575 x 55 x 2,5 mm total power requirement 3 kW weight of the machine ca. 700 kg dimensions of machine L x W x H 1,55 x 0,70 x 0,98 m - with mitre cutting Bwjdpfxovh Ncfs Abbjh Accessories: coolant

Condition: excellent (used), Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Bodpfxevyl Dvj Abbowh Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, functionality: fully functional, SONDERANGEBOT! AUSVERKAUF! Neuer Peletto RD-250 | 4 kW |150 kg/h Strohhäcksler Zwei austauschbare Siebe 2 mm und 5 mm; Europäisches Produkt direkt vom Hersteller, Garantie, Ersatzteile verfügbar. Nettokaufpreis mit USt.Id.Nummer Bjdpfxswivqqj Abbewh Selbstabholung oder Lieferung nach Vereinbarung. Es besteht die Möglichkeit, die Maschine vor dem Kauf zu besichtigen und zu testen. Ich freue mich auf Ihre Anfragen.

Condition: new, functionality: fully functional, Year of construction: 2025, SONDERANGEBOT! AUSVERKAUF! Der Strohhäcksler RD-30 ist ein vielseitiges Gerät, das Stroh, Heu und Kräuter effizient zerkleinert – ideal für Haustiere sowie verschiedene landwirtschaftliche Anwendungen. Ein besonderes Merkmal ist die Möglichkeit, die Fraktion durch den Wechsel des Siebs anzupassen, wodurch gemahlenes Heu und Stroh in unterschiedlichen Feinheitsgraden erzielt werden können. Technische Daten des Strohhäckslers RD-30: Abmessungen: • Länge: 400.0 mm • Breite: 400.0 mm Bwsdpfx Ajwlib Uobboh • Höhe: 850.0 mm • Gewicht: 20.0 kg Verwendung: Zum Zerkleinern von Stroh, Heu und agetrocknetem Grünfutter Antriebsart: Elektrisch Leistung: Bis zu 30 kg/h Motorleistung: 1.1 kW Spannung: 230V Drehzahl: 3000 U/min Anzahl der Messer: 4 Stück

Condition: refurbished (used), Year of construction: 2015, operating hours: 3,750 h, functionality: fully functional, power: 294.2 kW (400.00 HP), first registration: 10/2015, overall weight: 22,000 kg, color: red, operation weight: 15,000 kg, tire size: 26,5 x 650, loading space volume: 25 m³, total height: 4,000 mm, maximum speed: 40 km/h, working width: 2,550 mm, Equipment: additional headlights, hydraulic folding, trailer coupling, Greentec 962/20, a chipper combination with a high-tipping hopper with a capacity of 20 m³. Equipped with a Palfinger M70 crane, mounted on a 40 km/h chassis with a tandem axle and a K80 trailer coupling. The drum chipper unit was completely refurbished 500 hours ago with a new, current drum version (weight approx. 2 tons, blade system, 40 mm drum wall thickness, drive train designed for a maximum of 400 hp). All wear parts in the chipper area, as well as the brakes, have been completely replaced. Ideal for collecting material from streets and parking areas; there is space for the traffic control panel at the rear. Tires are in mint condition. Viewing in operation is possible and desired by arrangement! Bwedpfx Ajwk N Ekobbsh

Condition: used, Year of construction: 1982, Cutting height ca. 280 mm cutting width ca. 280 mm Bwjdovwfc Hopfx Abbeh Dimensions (L/W/H) 1500x700x1400 mm

Condition: good (used), Wexiödisk WD-100GR pellet washer The WD-100GR is a granule pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with an efficient spinning wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing unit Bwjdpfef Hp Tpex Abbeh No pre-washing or scrubbing by hand thanks to powerful washing with water and granules Great hygiene and fast drying with spin cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be performed from the front or the side Effective dishwashing and high capacity with double rinse system You can find more dishwashers in our store International shipping on request!

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm Bwodpfxscxxw Us Abbsh total power requirement:3,8 kW weight of the machine ca.:1,2 t

Condition: good (used), Year of construction: 2007, Machine-Details: Stock-No. 1022-1999 Type of machine tool presetter Make SPERONI Type STP 44 - A1 SV 51 Year of manufacture 2007 Type of control CNC Storage location Monheim (Germany) Country of origin Italy Delivery time immediately Freight basis ex warehouse, loaded on truck Technical details: measuring range X-axis 400 mm measuring range Y-axis 400 mm diameter max. 350 mm weight of the machine ca. 420 kg dimensions of the machine ca. 1,23 x 0,75 x 1,91 m Additional information: Used Tool Presetter in very good condition. Checked by a service engineer from SPERONI. Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22" Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) Bodpfxsyhcynj Abbewh Optionally, the following adapter can be obtained from the manufacturer: ISO 40 holder HSK 63 A/C holder

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Bedpfx Ajudxchjbbjwh Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm Bedpjwgizdjfx Abbowh max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: Bwsdjx D Ribopfx Abboh • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: ready for operation (used), empty load weight: 900 kg, semi-automatic with hydraulic clamping same as Kaltenbach type KKS Dia saw / abrasive - disk: 425 mm Max dia workpiece at 90°: dia 140 mm Max dia workpiece at 45°: dia 140 mm Max dimensions workpiece at 90°: 300 x 60 mm / 140 x 140 mm Turningspeeds: 13 + 26 m/min Power needed / motorpower: 2,9 kW Angle-input system (mitre)(number+°): R : 60° - L : 90° Bwodpfeygyx Sjx Abbeh

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Bjdpfxjlc Dwns Abbowh Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,000 h, laser power: 2,000 W, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, workpiece weight (max.): 120 kg, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: Bodpfjw Au Easx Abbowh - Robust C-frame - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Condition: ready for operation (used), Year of construction: 2006, This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat screen. The edgebander handles edge thickness from to mm and workpiece thickness up to 60 mm. Variable feed rate is 20 m/min. Overall length is 7360 mm. Contact us for more information about this machine. • Edge thickness: mm • Roller diameter max.: 3 x 45 mm or 0.8 x 65 mm • Workpiece thickness: 8 - 60 mm • Variable feed rate: 20 m/min • Electrical connection: 400 V - 3 Ph. - 50 Hz • Pneumatic connection: 6 bar • Swiveling control panel at the machine inlet • Durable short-stroke membrane keypad • Color graphic flat screen • Industrial PC with CompactFlash disk for mass storage • Aggregate function keys with LED status indicator • Operator guidance via color pictograms Bwedpfx Ajx Enkbebbeh • Online language switching between various foreign languages • Overall length: 7360 mm

Condition: new, Peak height above bed 210 mm Center distance 950 mm Permissible diameter over bed 420 mm Permissible diameter over saddle 160 mm Headstock Spindle bore 62 mm Spindle nose ASA 6ʺ Type 2 Motor Power 10.7 kW Spindle bore 62 mm Speed 0 – 3500 rpm Standard accessories - CNC control D. Electron Z32 (Lathe) with liquid crystal display and graphics mounted on swing arm, as well as built-in industrial PC Pentium and floppy disk drive. - Zero-backlash ball screw - Programming system ISO, Dialog, Teach-in - Memory capacity 127 MB - Enclosure as per picture with lamp - Sliding safety door - Mobile chip tray - Electronic handwheels with 3 steps 0.001 / 0.01 / 0.1 mm - Main motor power 10.7 kW - Rapid traverse 25 m/min - Constant cutting speed - Quill socket MK 5 - Quill Ø 80 mm - Automatic coolant system - Automatic central lubrication system - Fixed steady rest with rollers Bwsdpowqnm Tjfx Abbjh - Traveling steady rest - Chuck flange - Fixed center - Reduction sleeve - Operation and programming manual - Standard speeds 0-3500 rpm

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg Bsdpfxer Ha Dvs Abbowh

Condition: used, mileage: 71,550 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 2,199 kg, first registration: 12/2022, emission class: euro6, color: silver, suspension: steel, fuel: diesel, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, FC5 heat-insulating front windshield, P2W Advantage Package, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size child seat anchorage, EY6 Breakdown Management, B25 electric parking brake, CM0 painted bumpers, EI0 wireless charging system for mobile devices, FK3 chrome radiator grille, JK5 instrument cluster with color display, V23 high-grade interior trim, T68 child safety locks for rear doors and windows, Z1M registration class M1, IA0 axle configuration 4x2, LG7 LED High Performance headlamps, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ7 Active Park Assist, Q10 cross member for trailer coupling, T78 sliding door rail cover in vehicle color, HH4 THERMOTRONIC automatic climate control, E1E Digital Extra: hard disk navigation system, E1D Digital Radio (DAB), Y10 first aid kit, MJ8 ECO Start-Stop function, VL2 velour floor mats, E1K Navigation Package, ES1 12V socket in passenger compartment, SF6 driver's seat height-adjustable with lumbar support, ES2 12V socket in cargo compartment/load area, RD9 tires without brand specification, H00 warm air duct to passenger compartment, MS1 cruise control, HI2 Climate Zone 2 (moderate), V3P special model, RM0 all-season tires, FE3 front electric windows with comfort function, W65 tailgate, C6L multifunction steering wheel, FE7 electric windows in sliding doors, LA1 high-beam assistant, HZ0 electric auxiliary heater, F56 vanity mirror in passenger sun visor, H10 heated seats for driver and passenger, F4W washer fluid reservoir with increased capacity, E2Z MBUX multimedia system incl. navigation & DAB, XZ0 model generation 0, G7A 7-speed automatic transmission, W70 tinted privacy glass in the rear (black glass), V56 carpet in luggage compartment, V55 carpet in passenger area, V57 luggage compartment. We are available by phone Monday to Friday until 8:00 PM and Saturdays until 4:00 PM!! Additional information:!! Leasing/financing and trade-in possible!! !! Errors and prior sale excepted!! Bwsdpfx Ajyg D D Eebbeh All information provided without guarantee ... more details on our homepage.

Condition: used, mileage: 98,265 km, power: 210 kW (285.52 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 15,150 kg, maximum load weight: 10,850 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, next inspection (TÜV): 02/2023, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, automatic, lifting+lowering, rotating beacon, air-suspended, low-noise G1, last axle hydr. steered, side alu driving protection, roof hatch, environmental badge green Wheelbase: 3900 mm Body: Waste collection body HS Schörling OL21W (without body) EEV engine, front axle air-sprung, 7.5 t front axle, rear axle H7 13 t disk wheel 300, axle load measuring device, Telligent trailing axle hydraulically steered, ABS, ASR, stop brake comfort version, disc brakes on front and rear axle, front underride guard, additional stabilizer rear/trailing axle, lifting/lowering device, starting aid, parameterizable special module (PSM), on-board diagnostics 2, Allison automatic transmission 3000 P, automatic daytime running lights, engine brake can be switched on/off with constant throttle, lower radiator guard, rear engine output torque 600 Nm. Used body available for approx. 7000,-€ net. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bwedevhkvmepfx Abbjh - .

Condition: used, empty load weight: 4,580 kg, maximum load weight: 30,420 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2006, loading space volume: 25 m³, suspension: air, tire size: 385/65R22,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, MB axles disk braked, air-suspended, 1st and 2nd axle liftable, lifting+lowering, ABS (anti-lock braking system), EBS Body: aluminum transport tank approx. 25cbm. 3x 9t axles, axle 1 and 2 liftable. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bedpfx Ajvhk Agebbewh

Condition: used, mileage: 233,730 km, power: 115 kW (156.36 HP), first registration: 08/2008, fuel type: diesel, empty load weight: 3,905 kg, maximum load weight: 3,585 kg, overall weight: 7,490 kg, tire size: 205/75R17.5, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: engine braking, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 7, loading space length: 3,100 mm, loading space width: 2,200 mm, loading space height: 350 mm, Equipment: ABS, additional headlights, cabin, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel superstructure, Doka, double bench seat, rear window, switch 6, ABS (anti-lock braking system), constant throttle, auxiliary drive, rotating beacon, leaf suspension, AHK ball head, noise protection G1, lashing lugs, U-protection, lateral aluminum road protection, pendulum flaps, green environmental badge Wheelbase: 3700 mm Body: Meiller 3-side tipper body 2.5 t front axle, rear axle H2 5.6 t disk wheel 312, ABS, additional sound insulation, additional hot-air heating, engine brake, front parabolic springs reinforced level I, rear parabolic springs reinforced level II, floor insulation, right-hand hinged entrance door with window, Meiller 5-piston pump type 254/1, MB 56-2c power take-off. Ex-city administration! Approx. 3.000,00€ were invested! Towing capacity 3500kg! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bjdpfx Aevhkiaobbewh - .