Used Die Cut for sale (29,202)

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. Fedpfx Afowxtb Soijpn 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Fedsdzqmzopfx Afispn Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing Fpsdpfx Afju Iucuoien - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Fodpfx Afsw R Eqbjiopn Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Condition: ready for operation (used), Sheet format: 2000x1200mm, suitable for solid board, corrugated board and other materials. Fpjdpoht Hfqjfx Afisn

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 858799A, Manufacturer: Ruiyang Printing Machinery Co., Ltd., China Model: MH-1650 Machine Category: Die Cutting & Creasing Machine Machine Type: Automatic Large Format Die Cutter Year of Manufacture: 2014 Serial Number: 858799A Technical Specifications: - Max. Sheet Size: 1650 x 1210 mm - Min. Sheet Size: 650 x 550 mm - Max. Die Cutting Size: 1620 x 1190 mm - Speed: up to 3,200 sheets/hour - Power Supply: 380 V, 50 Hz, 3 phases Fpsdjw Rb Ipopfx Afijn Features: - Automatic feeder with suction head - Large format pile delivery - Heavy-duty design for carton and corrugated board - Control panel with management and safety functions - Suitable for large format packaging production

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Fsdpfxsu Ul Tzj Afiepn Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: used, Year of construction: 2009, DY Slotter Model FPS Gold 1227 Year of manufacture: 2009 Fodpfx Asw Rbbvjfiepn 3-color printing unit (1 defective) Double slotter unit Rotary die cutter Stacker Automatic jogger Automatic prefeeder (defective) Dimensions: Min. 300x500 mm / Max. 1450x2800 mm

Condition: ready for operation (used), functionality: fully functional, PMC MODEL 200 die cutting machine. Max label size 178 x 203 mm Min label size 25 x 50 mm trim margin 3 mm stack height 102 mm labels per hour , up to 1,200,00 Electrical requirements 3,5 kva shipping weight 700 kg Fedpsw I Sifefx Afispn Price under request

Condition: good (used), Heidelberg Cylinder 48x58,5 Fpodpfxjw Innks Afion

Year of construction: 1965, condition: ready for operation (used), Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. Fpsdpfxslc N Sze Afion

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: EP 32778, SEMI-AUTOMATIC DIECUTTING AND CREASING MACHINE - ETERNA ML 680 G Year of manufacture: 2006 Fodpjucfuhsfx Afiepn Serial number: EP 32778 Full technical documentation Crucible connected, possibility of testing. Condition: very good- from new in one company- very little used Attractive price for quick sale.

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers Fjdpfxju Ul Tuj Afiopn – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Year of construction: 1993, condition: used, Punching Machine Marumatsu SAPV-1612 Clutch replaced in 2024 Fjdpfx Afjw Ra Nrsispn Machine inspection and minor wear parts renewed in 2024 Additional spare parts worth €8,000 have already been ordered and will be installed by us before the sale.

Year of construction: 1975, condition: good (used), Size 72 x 104 cm 1975 91 Mio. in Production Fjdpfjkuy Ecjx Afijpn located: Germany available: immediately

Condition: used, Year of construction: 2015, operating hours: 24,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Fpsdpfowzyvhjx Afisn Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2015

Condition: ready for operation (used), Sheet format: 890x1180mm, inner frame width: 820x1120mm, pressing force: 300t, motor power: 4kW, length: 1800mm, width: 2100mm, weight: 4.3t. Fpsdpfeht Hfmox Afion

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CRUCIBLE (DIE-CUT) + HS (HOT STAMPING) SEMI-AUTOMATIC DIECUTTING AND CREASING MACHINE - ETERNA ML 1092 G III Fodpfsubylfex Afispn Year of manufacture: 11. 2005 Serial No.: EP 32668 Full technical documentation HS (hot stamping) - VERSOR SZ B1 Year of production: 2006 Factory no. 0620 Crucible +HS connected, possibility of testing. Condition: very good- complete from new in one company- very little used Attractive price for quick sale.

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Fpedpfx Afju Umcqjijn Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Year of construction: 1994, condition: ready for operation (used), A Bobst die-cutting machine for the corrugated board industry is available. Format dimensions X/Y: 1600mm/1100mm, min. sheet dimensions X/Y: 400mm/5200mm, die-cutting force: 400t, die-cutting speed: 6500/h, number of colors: 3, flute type: single/double. Including pressure unit Bobst Flexo 160, feeder Roda and crusher Pallmac. Documentation available. On-site inspection is possible. Fpsdpevw U Ekefx Afijn

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty. Fpedpewxtb Eofx Afisn

Condition: good (used), Atom SE 20C hydraulic arm press The device is in perfect condition, ready to work. It is ideal for die cutting difficult materials, especially used in the leather and printing industries. Possibility of using typical leather and bookbinding dies. Cuts paper, cardboard, leather, plastic, etc. Pressure 20t Fsdpfx Afswundtsispn Power supply 380V Table dimensions: 900mm x 430mm Hammer dimensions: 370mm Max stroke 90mm Engine power 0.9kW Weight 630kg Two-handed control.

Year of construction: 2024, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers Fpjdpfxeumuxxo Afion – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: good (used), Adast Grafopress GPE letterpress machine Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. Fpodpfov E A U Nex Afisn The equipment includes printing rollers. The device is used for die cutting, printing, creasing, numbering, etc.

Condition: good (used), Cauhe IVA 120×160 die-cutter The machine is fully functional, like new. Made in Spain. Format: 1200x1600mm Fodpfowq Dw Iex Afiopn Weight 10,000kg Power supply 380V Installed power 11 kW Impact force 2 Tm/dm2 Year of production 2015. Equipment: – pneumatic clutch and brake – control panel – quick assembly frame – 3 operating modes: continuous, with time delay, manual – central automatic lubrication – additional safety guards – operating tools – sheet metal for pressure