Used Die Cut Plotter for sale (17,501)

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 400 x 350 mm Djdoy Uwznspfx Agvsch Cardboard thickness up to 1.5 mm Corrugated board thickness up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Maximum pressure: 300 t Stripping section Separation section Centerline 1 mm plate Micro-adjustment Double sorting unit

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Djdpfxjy Sfbks Agvsch Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Dcedpfxoy E Ex As Agvoh Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Dcjdpfxey E Expo Agvoh The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Dcodpfx Agex Syvcsveh

Condition: new, Year of construction: 2025, Manual die cutting and creasing ML-1500 Inner chase size (mm): 1500 x 1040 Automatic oil system Dcedpfxjxluags Agvjh Infrared security barrier Max. rule length (m):

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm Dcedpfxoy Iu Rts Agveh maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Dodpfxevfx Ulj Agvoch Format: 600 x 500 mm Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Other Features: Front and side lays Non-stop feeder and delivery options Dsdpfx Asxg Hzfsgvsch Includes chases for both die-cutting and stamping

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: Dcsdpfoymmqzox Agvoh • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Dcedpfx Ajwmy Riegvoh Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks Dedpfx Agjwh Tq Ssvoch • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. Dcsdpfx Aol Ax Uwsgveh The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Year of construction: 1997, condition: excellent (used), Ref: 11107 . 1997 Bobst SP 104 E Excellent condition, ex Swiss print house, only 32,500 hours worked! Now fully cleaned & checked by specialist engineer. Die cutting machine with stripping and blanking. Equipped with: Automatic feeder Double-sheet sensor Central line for quick job change Bobst C.U.B. electronic control system. E. (Bobst Electronic Control Unit) Micrometric adjustment Quick Lock cutting chase 1-4 mm cutting plate Micrometric Adjusting Upper pull-out stripping frames Central pull-out stripping frame Lower pull-out stripping frames Upper and lower stripping hardware Non-stop device Automatic waste removal apron Dsdpfxey Uyb Rs Agvsch Synchronization device timing the sheet arrival against the front lays Lateral adjustment for suction device Pull guide OOS Chase changer Auto delivery with non stop Specification: Speed: 8000 sheets/h Pressure: 2,5 MN (250 tones) Sheet size: 104 x 74 cm max.40 x 35 cm min., sheet thickness: 0,4 cm, Punching with gripper margin: 104 x 71 cm Punching without gripper margin: 104 x 74 margin adjustable: 9-17 mm Embossing format: 104 x 71 cm Punching line height: 23,8 mm, Height of embossing plate: 6.35 / 7 mm Material: Paper from 80/90 g/m², Solid board 250 to 2000 g/m² Corrugated board E and B up to 4 mm.

Condition: excellent (used), Year of construction: 2003, operating hours: 40,000 h, functionality: fully functional, cutting width (max.): 790 mm, color channels: 5, Good working condition, stripping Dodshtncujpfx Agvoch

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately Dcsdpfx Ajy Umkfegvsh We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): Dcedpfx Agjif Ek Revsh • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 1997, operating hours: 27,000 h, condition: excellent (used), Bobst SP 130-SER in very good condition, available due to business closure. Dcodoy S A Hwopfx Agvsh Max. sheet size: 130 x 92 cm Min. sheet size: 58 x 54 cm Cutting force: 500 tons Speed: 6,500 sheets/hour Operating hours: 27,000 hours For any further inquiries, please contact us via email or WhatsApp.

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Djdsy Szlxspfx Agvoch Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Dcodpfjy Syivsx Agveh Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm Dcjdpfx Aoy Rulcsgveh MAX. CUTTING PRESSURE: 550 tons

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Djdpfeyz Adnox Agvsch Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Dsdpfxeyuw S Ej Agvech Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Djdpfx Agsyxq Ucsvoch

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Dodpfx Aoww E Nregvsch Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations