Used Die Casting for sale (5,953)

Condition: new, Year of construction: 2023, 1 pc cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 400kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn11, IP00, year of production 2018 ( connected / not energized ), ecodesign tier 1, project documentation and rutine protocol, manuals. Fpsdpfxjyhxlke Ah Esp

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch Fjdsw Eqdqepfx Ah Espp

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Telescopic handler, rotating Mast type: Telescopic Technical condition: New Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: The vehicle will be inspected according to UVV regulations. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heater, STVZO compliance, full cabin, CE certificate, Fpsdpfx Aew Eqdwjh Eop PEGASUS60.30St.V, TÜV/Dekra approval, 20 km/h, axles for construction machinery with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED spotlights on the rigid boom, 7-pin socket on the upper carriage, set of radio pre-wiring with antenna and speakers, standard carrier plates for tools, mechanically sprung Grammer seat with dual joystick, right joystick with integrated FNR and electrical pre-wiring for equipment with 3 movements, wheel set with off-road tires 18R22.5XF MICHELIN, semi-automatic air conditioning, detachable windshield protection for the cabin, kit for operation during upper carriage rotation of 180 degrees, boom vibration damping, integrated rear view camera with 7" display (not compatible with 7" monitor with digital camera on the telescopic boom), telematics kit (DTS), road spotlights (front) with LED daytime running lights, cabin with front windshield made of laminated glass, pre-wiring for Woodcracker saw, three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg, pallet fork carrier plate including load hook A&M, width 1.50m including pallet forks FEM4A, forks: 150x50, length 1.2m, load capacity.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/9030, Offer Number: M08L/9030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SCHULER Type: GB15-5 Constr. year: 1988 diameter range: 8-18 mm number of dies: 5 number of stations (incl. cut off): 6 shaft length under head: 120 mm Fpedpfx Ahjxgt N Ns Eep cutting length: 140 mm output - pieces/min: 60-170 press power: 100 to Location: In our warehouse

Condition: good (used), Used pressure vessel with agitator Last application: Pharmaceuticals / Chemicals Item number: 10882 Volume: 345 litres Type: Vertical on 4 legs Material (product-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure (as per nameplate): -1/ +0.8 bar Operating temperature: 100°C Fsdpfxew A Inuj Ah Eopp Tank dimensions: Outer diameter: 744 mm Inner diameter: 740 mm Total height: 1,590 mm Total width: 800 mm Total length: 1,200 mm Cylindrical height: 600 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Fittings/Features: Nameplate: Yes Agitator: Yes Outlet diameter: 40 mm Discharge height from floor: 335 mm Outlet valve: Disc valve Control cabinet

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06L/9048, Offer Number: M06L/9048 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-40A Constr. year: 1990 diameter range: 6 mm Fjdpfxow Nxqls Ah Espp shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Fpodpexnyrtjfx Ah Ejp Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Fpodpfx Ahsxnytqj Ejp Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1974 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Condition: good (used), Knife holder, shear knife holder, scissor cutting holder, cutting knife holder, scissor slot holder, scissor knife holder -Manufacturer: Dienes, pneumatic cutting blade holder -Type: PSG -Part No.: 245AA50002001 -Blade diameter: 130 mm / 5.118 inches -Dimensions: see photos -Number: 2x shear blade holders available -Price: per piece -Dimensions: 320/70/H145 mm -Weight: 4 kg/pc. Fodpfxexw Uubj Ah Eopp

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Fsdexyl Evopfx Ah Eopp

Condition: used, tank capacity: 15,000 l, For sale: 3 silos no longer needed. Fjdpox Iu N Aofx Ah Eopp

Condition: ready for operation (used), DMG 110498 Monitor with control panel, ID: 2341559, serial number: 506112907, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fsds Ahvgljpfx Ah Ejpp

Condition: new, Siemens 6FC5210-0DA00-1AA1 operating unit SN T-MD2011590, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Fsdpfxjy Nr E De Ah Espp

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 400 kg, controller model: AGIEMATIC T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 350 mm Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Working area Table size: 600 × 450 mm Workpiece dimensions max.: approx. 860 × 620 × 350 mm Workpiece weight max.: 400 kg Fpjdpfjzpypnsx Ah Eop Electrode weight max.: 100 kg Working tank (internal): approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm MACHINE DETAILS Control system: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Condition: used, Straightening and welding plate, cast steel and gray cast iron, heavily ribbed Cast plate, heavy straightening plate Length 1500 mm Width 1000 mm Thickness 100 mm Continuous plate thickness approx. 37 mm Table height 860 mm - Table base made of steel (custom-made) Weight 640 kg Good condition Fpedpsrl U Swsfx Ah Eop

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off Fpedporg Ebcsfx Ah Ejp - Control system

Condition: used, Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: molding tool/press tool -Profile: Ø 76 mm -Receptacle: Ø 40 mm Fpedpferlppkex Ah Eep -Dimensions: Ø 76 x 130 mm -Weight: 2.8 kg

Condition: excellent (used), Möller tilting trays according to plan B, with raised bumps No need for dusting Thanks to special bumps on the trays, the dough pieces cannot stick Tilting trays, 58.5 x 38.5 x 4.5 cm We still have approximately 200 pieces in stock. Fedpfoghr Nnox Ah Eopp

Condition: used, Alignment and welding plate, made of cast steel – gray cast iron, heavily ribbed Heavy-duty alignment plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Fjdpfokpwuxox Ah Eepp Working height: 860 mm Plate thickness: approx. 35 mm, continuous - 4 adjustable feet Weight: 1050 kg

Condition: excellent (used), Year of construction: 2000, Cast resin epoxy distribution transformer 1 pcs 2000kVA, manufactured by SGB Germany, voltage ratio 22000 ( ± 2 x 2,5 %) /400V, Dyn1 or 5 or 11, IP31 or IP00, Al/Al, temperature monitoring unit, functional. Fpodpfxslpd Tcs Ah Eep

Condition: used, Year of construction: 1960, machine/vehicle number: 16945, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBGYear 1960 - Serial-No. 16945 Size min.: 210 x 280mm Size max.: 560 x 7700mm Fpodpfxerttuhe Ah Eep Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.0800kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2000, condition: used, Punching machine Fpedpfxeg Dgyxj Ah Ejp Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: used, Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Form tool / press tool 2-part -Pressure profile: Ø 70 x 140 mm, 15 mm overhang -Side part: unscrewable -Socket: Ø 40 mm -Dimensions: 250/70 / H298 mm Fpjdpfx Ajhb Uhfsh Eop -Weight: 21 kg

Condition: used, Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Forming tool / press tool -Socket: Ø 40 mm -Print area: 125 x 15 mm, see photo techn. drawing -Dimensions: 125/50 / H163 mm -Weight: 4.3 kg Fodpfx Aohb Uhmeh Eopp

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Fjdpslyqrcjfx Ah Espp Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order