Used Deep Hole Drilling Machine for sale (85,112)

Condition: good (used), 1 used coordinate centering tapping and drilling machine Make: Hartkämper Model: S 35-100 Technical specifications: Max. drilling capacity: 18 mm Tapping capacity up to M 10 Drilling depth: 90 mm Throat depth: 215 mm Spindle-table distance: 150-450 mm Fpedsxuqd Topfx Afnob Column diameter: 75 mm On coordinate table with Heidenhain digital readout for X and Y axis Measuring length X axis: 1000 mm Dimensions (machine footprint): Length: 1360 mm Height: 1700 mm Depth: 1000 mm

Condition: good (used), Data: - Manufacturer: Besana - Type: Besana 70/2TC - From current production - Max. Projection to the rear: 1200 mm - Max. Drilling diameter: 300 mm - Table dimension: 1200 x 1200 mm - Machine dimension: D 2400 x W 1200 x H1800 mm Fpodpfxoi D Ed No Afneb - With water pump and circulation cooling - Lower drill, drills automatically with compressed air, upper drill is guided manually - Weight: 1200 kg Price on request

Condition: excellent (used), Complete Red Baron with 3 drilling heads Fpedjxl Eclspfx Afnob

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, working width: 2,000 mm, travel distance X-axis: 4,020 mm, travel distance Z-axis: 150 mm, Machine was overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Maximum sheet thickness: 30 mm Maximum steel thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Power: 10 kW (13.60 hp) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling range: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting range: M5 – M20 Max. material thickness: up to 25 mm Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Filter system: Donaldson DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Volume flow: 4,500 m³/h Mechanics and Control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h Fpodowyaxmjpfx Afnsb EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle Cleaning and calibration station LU3K Automatic nozzle changer with 8 nozzles Donaldson® filter unit DFPRO 6 Cyclopeel Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Condition: like new (used), Year of construction: 2018, 2018 Schmid SE 349-2 Vertical Drilling/Tapping Machine with Siemens 840D Control (New/Unused, In Shipping Crates) - Note: Images are for reference only. The machine is a new 2018 model and remains unused in its original shipping crates in offsite storage. Photos shown are of the same model for illustration purposes only. With 6 Jaw Ø4,300mm Chuck. Maximum Workpiece Ø4,000mm. Axis Travel 'X1'=600mm, 'X2'=600mm, 'Z1'=1,000mm, 'Z2'=1,000mm. Rapid Traverse 'X1'=30m/min, 'X2'=30m/min, 'Z1'=30m/min, 'Z2'=30m/min. Minimum Distance Between The Rams 1,200mm. Ram Dimension 450 x 450mm. Spindle Taper HSK 100. Maximum Spindle Speed 4,000rpm (63kW Motor). Torque (S6-40% ED) Nm 859. 36 Vertical Position ATC, 10 Horizontal Position With Dual Right Angle Heads. Fpodpfx Ajx Swv Hefnsb With Automatic Doors, Knoll High Pressure Paper Filtration Coolant System, Dual Chip Conveyors, Schimpke Chiller Unit, Weight 30,000kg.

Condition: new, The R 60 VT PRO is a high-quality radial drilling machine that belongs to the Radial Drilling Machines category, representing the latest generation of conventional radial drill presses from KNUTH. This versatile machine simplifies the machining process, supporting precise drilling, countersinking, and thread cutting—ideal for single parts and small batch productions. Built with premium cast materials, its robust design features a large column and torsion-resistant boom, ensuring stability and reliability. Key functionalities include an electronically controlled servo quill feed with a large touchscreen display, automatic thread cutting capabilities, and a powerful coolant system, all designed to streamline operations. The machine offers adjustable height for the boom, central lubrication for maintenance ease, and a variety of user-friendly interfaces for setting operating parameters. With a drilling capacity of 60 mm and throat depth from 350 to 1,600 mm, this robust and advanced radial drilling machine makes daily production tasks smoother. You can request a quote or order online to enhance your machining capabilities with the R 60 VT PRO. Fpedpfxju E Hzwe Afnob

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Fpsdswxy Dgopfx Afneb Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: new, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 210 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, total height: 1,120 mm, total length: 710 mm, total width: 890 mm, type of input current: DC, overall weight: 240 kg, table length: 840 mm, table width: 210 mm, power: 1.5 kW (2.04 HP), distance table to spindle center: 360 mm, WMD30LV - 230V / 1Ph Fpsdpoga T Agofx Afnob Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3 x 14 mm Throat ----- 240 mm Spindle-to-table distance ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill chuck incl. drill arbor * Digital depth stop * Digital spindle readout * Fine adjustment * Left / right rotation * Milling head can swivel 90° left/right * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling vise * ISO30 collet chuck & 12 collets in case * Milling cutter set

Condition: new, Year of construction: 2024, Machine is brand new and factory packed. Loading available in our warehouse and can be quickly delivered. ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm Fsdpfeip Dh Isx Afnspb - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill diameter: 160 mm, table width: 320 mm, table length: 880 mm, We are offering a Fehlmann Picomax 54, year 2001, in very good condition. The machine has seen limited use, as our production mainly relied on larger automatic CNC machines. Details: Manufacturer: Fehlmann Model: Picomax 54 Year of manufacture: 2001 Condition: Fully operational, can be tested on-site Location: Boxtel, The Netherlands Availability: Immediately This is a reliable and precise machine, ideal for toolrooms, prototypes, or small production runs. Fodpoxwk D Ejfx Afnspb The production company is closing in the Netherlands, so the machine is available for immediate sale.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 59978, feed length X-axis: 3,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, BIESSE SKIPPER 100 – Through-Feed CNC Drilling Machine Manufacturer: Biesse Model: Skipper 100 Type: Through-feed CNC drilling machine Year of construction: 2005 Condition: Used – fully functional We are offering for sale a Biesse Skipper 100 through-feed drilling machine, well maintained and currently in working condition. The machine has been used in regular 1 shift production and has proven to be reliable and accurate. It is suitable for high-efficiency drilling operations in panel processing, particularly for furniture and interior production. Technical highlights - CNC-controlled through-feed drilling system - Designed for fast and precise horizontal and vertical drilling - Robust industrial construction Fsdex R Sxaspfx Afnspb - Approx. machine weight: 3,000 kg Technical data: - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - Workpieces fixing clamps (for the panels introduction in the working area) - Out-feeding table (with motorized belts) - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (for longer panels than mm 2000, minimum thickness is mm 13) - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 24 Vertical drilling spindles - No. 6 Horizontal drilling spindles (4 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 24 Vertical drilling spindles - No. 6 Horizontal drilling spindles (4 in X axe + 2 in Y axe) Condition & maintenance: - Fully operational - Regularly serviced - Clean mechanical and electrical condition - Control system fully functional A large quantity of original spare parts is included in the sale (see photos), such as: - Seals and pneumatic components - Mechanical wear parts - Various original Biesse spare components This significantly reduces future maintenance costs and downtime. Documentation - Original Biesse documentation - User manuals and technical documentation included Inspection - Inspection under working conditions is possible and recommended - Machine can be tested on request - Machine is still connected and can be demonstrated in Slovenia Reason for sale Machine is being sold due to purchasing of a new machine.

Condition: new, The KNUTH R 80 V radial drilling machine represents a powerful and versatile addition to the Radial Drilling Machines category, designed for drilling, reaming, and countersinking in steel or cast iron. Its robust construction ensures constant high accuracy, while the long projection arm provides exceptional flexibility for handling large and heavy workpieces. Key features include an infinitely variable spindle speed with a digital display and a cube table that offers extended clamping possibilities. Additionally, the machine is equipped with a powerful coolant system, LED work lamp, and user-friendly controls for efficient operation. With a throat depth ranging from 450 to 2,550 mm and a drilling capacity of 80 mm, this model is ideal for various production and construction tasks. Trust KNUTH for your drilling solutions and request a quote for the R 80 V Radial Drilling Machine today. Fpsdpfx Afeu Abxfenob

Year of construction: 1989, condition: excellent (used), 1 used centering drilling machine make Jones &Shipmann infinitely variable speed up to 1400 rpm drive 0,37 KW first class condition Fpedpfshg Ennjx Afnjb

Condition: used, Year of construction: 2014, operating hours: 9,782 h, Working Area - Drilling - Drilling capacity, full drilling (steel): 45 mm Drilling capacity, full drilling (cast iron): 55 mm Horizontal travel: 1050 mm Vertical travel: 450 mm Quill stroke: 200 mm Working Spindle / Head Speed range from: 15 rpm Speed range up to: 2800 rpm Number of gear stages: 2 Spindle taper: MK 4 Fpsdpsx R Sirsfx Afnob Maximum torque: 250 Nm Max. distance spindle ... to clamping surface: 710 mm Table Clamping surface (left-right): 1200 mm Clamping surface (front-back): 750 mm Electrical Connection Data Total power consumption: 7 kW Connected load: 9.3 kVA Connection voltage: 380 V Mains frequency: 50 Hz Dimensions / Weights Space requirement, length: 3000 mm Space requirement, width: 3000 mm Overall height: 3220 mm Total weight, approx.: 2960 kg Condition Description The machine has seen very little use and is in very good condition. Only 97 operating hours!!!!

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Fodpexdw Ukofx Afnopb Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: used, Used machine Fedpfxewlwpge Afnopb Equipment and technical data: - Double-sided line boring machine - 2 drilling motors, each 1.8 kW, with oil brake cylinder - Stroke max. 130 mm - With pneumatic directional control valve - 21 spindles, spindle pitch 32 mm - Max. drilling distance 640 mm (by moving the workpiece up to 2656 mm) - Portal clearance 850 mm - Air consumption at 5 bar approx. 11 l per cycle - Extraction nozzle 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Storage location: 63934 Röllbach

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position Fsdpfx Afed S Uhqsnjpb ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Fsdsq Rdqnjpfx Afnspb

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Fpodpfxetzctme Afnob Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Cost savings for the end user €38,000 vs. €21,000 DMA supplies high-quality CNC drilling machines at bargain prices by eliminating expensive service contracts and installation visits. Ideal for professionals who want to remain in control themselves. The purchase price includes: - CNC controller - CNC Cam - Starter kit of drilling tools Focus on functionality: Your machine, your management, our lowest price. No. 7 vertical rows No. 1 TH1 horizontal double spindle (X-axis) for front/back drilling Manual panel alignment END PANEL READER for perfect matching Remote support software Extraction flange Scratch-resistant BRUSH TOP to prevent accumulation of dust and chips Work MODE selectable at the operator side or in continuous cycle Fpodpfx Afex R Drxeneb HARDWARE AND SOFTWARE 12" touchscreen with MAGGI patented NO TEXT system USB port and Ethernet port for file import, online support, and software updates Linux kernel-based system Fobmsu U Hgiegku S Hepp CNC memory for up to 1,000 programs

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device Fsdpfxsvb Drhj Afnjpb *

Condition: new, Year of construction: 2026, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg Fpedpfx Afjg Uaiujnsb - immediately available- [...]

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Fpjdpfx Asx N If Hjfnsb Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Documentation

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Fpodedqzbnepfx Afneb Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Guaranteed concentricity

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Fpedpfx Aox N Iftefnsb Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Documentation