Used Decoiler Straightener for sale (973)

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Nljdpfxeh Agnus Ad Sjc Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t Nodpfxofxyigj Ad Solc draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, pressing force: 300 t, For sale is a hydraulic portal straightening press (H-frame) from manufacturer Durendus with a maximum pressing force of 300 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm, and a stroke of up to 600 mm, making it particularly suitable for straightening, alignment, and heavy forming applications in industrial environments. The machine shown here was built and delivered to a customer’s specification; we can manufacture this machine as a new unit on short notice. Available Options (upon request): The options listed below are based on completed customer projects and allow targeted adaptation of the machine to specific applications. The base machine is delivered in a functional basic configuration—in practice, it is most often expanded with additional features and configured to meet project requirements. Examples include: * Siemens S7-1200 PLC + 7” display for operator interface * Wireless remote control * Safety edge at the base of the portal columns (600 mm) * Table with T-slots * Motorized bridge positioning * Travel path extension * Larger open height * Light curtain under the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data & Information: Hydraulic Portal Straightening Press – H-frame – 300 t ==== General Specification - Designation: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Pressing force: 300 t (adjustable) - Distance between uprights: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max installation height: 1,000 mm - Table height from floor: 950 mm - Ram extension: 200–400 mm - Total weight: approx. 9,500 kg Nodpfx Adjyzfkqe Sslc ==== Hydraulic Cylinder - Piston stroke: 0–600 mm - Max working pressure: 250 bar - Return speed: 16 mm/s - Ram speed: 10 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Pump capacity: 60 l/min - Tank volume: 250 l - Motor rating: 11 kW - Pressure accuracy: ±5 bar - Hydraulic unit: top-mounted - Valve technology: DUBLOMATIC - Filter: FILTREC - Oil level monitoring: electronic - Cooling: air cooling ==== Movement System - Bridge drive: 2 × 2.2 kW - Lateral cylinder movement: 0.75 kW - Movable bridge: yes - Laterally movable cylinder: yes ==== Control System - PLC: SIEMENS S7-1200 - Operation: pendant panel / wired remote control - Control: manual valve + electric control - Optional: 7" touchscreen - Optional: wireless remote control - Optional: up to 99 programs storable ==== Safety - Hydraulic overload protection - Electronic overload protection - End travel safety switches (top/bottom) - Safety PLC - CE-compliant design - Optional: safety edge on portal columns ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 11 kW - Total connected load: approx. 18 kW Fields of application: Straightening, tool and mold making, steel construction, heavy forming, maintenance, try-out, alignment work (Hydraulic press, hydraulic straightening press, portal press, portal straightening press, 300-ton press, 300 t press, H-frame press, heavy-duty press, industrial press, forming press, straightening system) ##### The images shown serve as samples and may deviate from the actual configuration.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks Nlodpfehyc Nwjx Ad Sjc m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec Nlodpfofhcc Rjx Ad Sec :0-25 mm/sec.

Condition: new, Year of construction: 2019, pressing force: 400 t, pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec Njdpjd Ttydsfx Ad Sslc :67 Lt./min. Total weight, approx.:26 t

Condition: new, Year of construction: 2018, pressing force: 200 t, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec Njdpfxjfxykle Ad Sjlc down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Nsdofxygwepfx Ad Selc Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Nledpsyxnzyofx Ad Soc Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009 Nlsdpfx Adeupg Scj Ssc

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Nlodpsxyhhaofx Ad Soc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1989, pressure 16 t throat 200 mm Njdpfx Asyx Ii Red Sslc stroke 160 mm dayligth 490 mm table surface area 1300 (3300) x 250 mm table height over floor 935 mm ram surface 65 mm power requirement 4,0 kW weight of the machine ca. 2,2 t required space 1,4 (5,4) x 1,3 x 2,4 m with oilhydraulic drive, shaft straightening device length of straightening table approx. 1300 + 2x2000 mm

Condition: used, Year of construction: 1975, pressure 40 t throat 280 mm stroke 160 mm dayligth 420 mm table surface area 2000 x 500 mm table height over floor 870 mm ram surface 85 mm power requirement 7,5 kW weight of the machine ca. 3,2 t Njdpfx Ajyx Ihaod Sjlc required space 1,7 x 2,0 x 2,3 m with oilhydraulic drive, shaft straightening device, manual lever control

Condition: used, Year of construction: 1973, material width 650 mm coil weight 2,0 t coil internal dia. 380 - 520 mm coil outside dia. 1500 mm speed 20 m/min Nlsdoymp Szopfx Ad Soc Power capacity 2,0 kW Weight 1,4 t Dimensions (WxDxH) 1,6 x 1,6 x 1,6 m decoiler H 2 with motor, hydraulic expansion, hydraulic snubber roll, coil loop control

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm Nledpfx Ajvuuapsd Soc coil external diameter 1500 mm power requirement 1,0 kW weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1999, material width 360 mm coil weight 3,0 t coil internal diameter 380 - 520 mm coil external diameter 1500 mm weight 1,4 t dimensions (WxDxH) 1,8 x 1,8 x 1,7 m Nsdpfxsvut R He Ad Selc with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate

Condition: good (used), Year of construction: 1960, Straightening and keyway slotting machines, manufacturer CARL HURTH, type: P5V, year approx. 1960. Modernized in 2018 with two-hand control. Clamping length: 1250 mm with various support dies up to 50 mm diameter. 4 dial gauge holders. Ready for use. The machine can also be used for keyway slotting. Dimensions: width 1500 mm, depth 1300 mm, height 2400 mm, weight approx. 2000 kg. Nodpfx Asy Rgk Rod Selc

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D08L/8075, Offer Number: D08L/8075 Machinetype: straightening and cutting machine Nedpfx Adjwi Svie Sslc Make: WAFIOS Type: DRf/30 Constr. year: 1955 diameter range: 7-16 mm cutting length: 6000 mm speed - meter/min: 65 Location: In our warehouse

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Nledjy N Du Ropfx Ad Ssc Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes Nedpfx Adjwqb Sco Sslc - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 06 61 230, Order No.: Lg 34022 Single-Sided Decoiler BBT ABH 1000/300 New Machine Year of manufacture: 2026 Machine No.: 06 61 230 Technical Data Load capacity: max. 1,000 kg Strip width: max. 300 mm Inner coil diameter: approx. 360 to 420 mm Nljdeyur Tdspfx Ad Sjc Outer coil diameter: approx. max. 1,400 mm Uncoiling speed: approx. 2 to 15 rpm With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gearbox motor. Expansion of the support segments is manual via hand crank and joints. Number of support segments: 3 Coil side guidance via robust adjustable arms, lockable. The decoiler stand is built in a heavy-duty box-section design as a welded construction. Optional equipment: Shutdown 'Loop too small' via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guide on the base housing of the loop control, adjustable in passage width by means of lateral guide rods. Currently in pre-sale. Delivery time approx. 3 months. Image shows reference machine.

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Thickness: up to 2 mm Nsdpfjm E U Hisx Ad Selc If you have more questions, we will be happy to answer them.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm Nljdowv H Awepfx Ad Soc 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2026, neu 2026 070217 Juni 2026, Zwischenverkau Türkei Nsdswirz Sepfx Ad Sslc 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg Njdpfx Aewirz Esd Sjlc 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm