Used Recoiler Decoiler for sale (329)

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft Isdpfxswvv Rqo Afietn - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system Iedpfshx R Etex Afietn - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Isdpfx Aoua Nngjfietn Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm Itjdpfx Aogf Aaqjfion MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: used, Year of construction: 1987, Ref. No.: Lg 23112 Compact Decoiler-Straightener Combination, KEMMERICH V1000 - RM 6020 Used, in good condition Year of manufacture: 1987 – Machine No. 6638-11 Technical Data Passage width: max. 200 mm Material thickness: 0.5 to 3.0 mm Max. material cross-section: approx. 400 sq mm Number of straightening rollers: 7 Straightening roller diameter: 60 mm Straightening roller adjustment: individual via spindles Number of feed rollers: 2 Feed roller diameter: 60 mm Feed roller opening: manual Number of exit rollers: 2 Exit roller diameter: 60 mm Exit roller opening/pressure: manual Coil weight: max. 1,000 kg Expansion range: 380 to 520 mm Max. coil outer diameter: approx. 1,200 mm Strip speed: approx. max. 20 m/min Connected load: approx. 3 kW Drive: steplessly adjustable via frequency converter. Itedpjxpm Rxefx Afion Loop control: analog, via feeler arm and potentiometer.

Condition: used, Coil weight: 2 x 2 ton Material width: 310 mm Itedeuqdq Eopfx Afion Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton Standard configuration braked reel, not poweredOperating instructions not available

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm Itjdpfx Afji Hi Swoisn coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm

Condition: ready for operation (used), Decoiler, Sheet Decoiler, used machine Overall dimensions: 750 × 550 × 1260 mm Electrical data: 400 V Isdpfx Asxfkypjfistn Opening: 190 – 420 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Itsdpjxiyx Nefx Afijn

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Ijdpfxsh T Ducs Afistn Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Year of manufacture: 1992 Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Uncoiler stand in robust box-type design as a welded structure. Isdsxn Tprepfx Afietn

Condition: used, Year of construction: 2001, machine/vehicle number: 07011175, Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Iedeuqdgaopfx Afistn Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Condition: excellent (used), Year of construction: 1991, laoding capacity: max. 700 Kg. Iedpfsuugi Esx Afijtn decoiler diameter: 1.000 mm coil outside diameter: max. 1.400 kg. coil inside diameter: 260 - 710 mm strip metal width: max. 120 mm

Year of construction: 1986, condition: good (used), strip width: max. 200 mm Iedpfxobh Ucbs Afietn strip thickness: 0,1 - 1 mm coil weight: 0,5 t mandrel Ø: 304 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Itsdpfxsq A Tw Ro Afien Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Iodpfx Afenbdyaoietn Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Itjdpfjuqc Ivox Afion Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t Itsdpfjd Ha E Ssx Afien mandrel Ø: 508 mm

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Isdpfx Astgvgpjfijtn Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Year of construction: 1981, machine/vehicle number: 11798-214, Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Ijdpfeu Uc Tlox Afiotn Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Year of construction: 1980, condition: used, strip width: max. 2.000 mm strip thickness: 0,4 - 4 mm coil weight: 20 t Isdpfx Afockanpjiotn cone Ø: 300 - 1.000 mm

Condition: used, Year of construction: 1985, Decoiler Ijdpfoxdl Niox Afietn Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm Itsdpjd Ha E Iofx Afisn strip thickness: 0,5 - 3 mm coil weight: 6 t mandrel Ø: 508/610 mm

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter Ijdebh S Dpjpfx Afietn strip width: max. 650 mm strip thickness: max. 3 mm coil weight: 2 t mandrel Ø: 406/508/610 mm

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t Itodpobh Ubwefx Afion mandrel Ø: 508 mm