Used Cyclone Separator for sale (6,475)

Condition: new, The split separator has a diameter of 900 mm and can be supplied with sound insulation on request. Rcjdpfxovuku No Ahcsf Drive electric motor 0.75 kW

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Rcjdpfxszq Hb He Ahcof Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Rjdpfxoq Sp Hae Ahcocf Model: WT440120 Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: used, This listing is for a SWECO PH06 Pharmaceutical Separator with matching SWECO Adjust-A-Vibe Control SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF049 Rodsxzia Hopfx Ahcecf Listing name: SWECO PH06Y2 Pharmaceutical Separator

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Rjdpfx Ahoxvrfnocscf Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm Redpfx Ajy R S E Hshcecf -Note: filter unit only, without extraction fan -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Rcedpeytgrxefx Ahcsf Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition Rcsdpfx Ahjyrxwwecof * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) Rodpfx Aoyap Icehcecf - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: good (used), Flaker Andritz K 1220 Rcsdpfxsxw Epps Ahcsf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Rcodpfx Ahozvb I Eocjf Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: F0i-F, total height: 3,120 mm, total width: 3,350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 2,597 mm, number of axes: 3, This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Additional equipment • Spindle Cooler: Included • Preparation for 4th Axis: Pneumatic Clamping Line • Torque Monitoring: Tool Monitoring Systems Machine Benefits Technical Machine Benefits • Coolant pump medium pressure type 1: 19 bar, 1. 5 kw, 18 l/min • Cyclone filter: 25 um • Hinged belt conveyor: ejection left or right side • Oil separator: belt type Rjdox D Sqtopfx Ahcocf Extra Information Machine still under power Technical Specification Taper Size BT 40

Year of construction: 2023, condition: like new (used), functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. Rodpfx Aer Iig Sjhcocf The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Not included: Rodpfxsvgcwmj Ahcscf - Bunker discharge system - Chimney Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you.

Year of construction: 2022, condition: new, machine/vehicle number: 201811209, Rising conveyor belt / angle conveyor belt, articulated conveyor belt incl. magnetic separator overband magnetic separator magnetic tape Rising conveyor belt + overbelt magnetic separator Complete solution for wood chip producers Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 3,000mm Rising range: 2,000mm Angle in the bend area: 45° Total conveyor length: 4,400mm Discharge height: 1,600mm Height of horizontal: 200mm Conveyor belt width 500mm Drive roller + deflection roller S235 steel welded and machined Aluminum deflection roller stored in the kink and crowned overturned PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 1.1KW, GEMOTEG speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Rodpfx Aedrdyyshcecf Drive etc. ready for connection, motor 2 pcs. corrugated edges 40x35mm T40 studs, pitch 400mm 2-layer particularly laterally stable Usable width 190mm, results as follows: Transverse arrangement -70+35-190+35-70mm

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Redpfx Ajv Syvqehcjcf Viewing window: Safety glass with replaceable protective film Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: new, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Rodpfxsvuggbo Ahcocf Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg

Condition: new, Year of construction: 2026, CORMAK FAN 11 High-Pressure Material Handling Fan – Premium Industrial Blower for Dust and Sawdust Extraction The CORMAK FAN 11 is a premium industrial high-pressure material handling fan designed for demanding dust extraction and pneumatic conveying applications. Delivering an airflow of up to 15,445 m³/h and powered by an 11 kW three-phase motor, it efficiently removes sawdust, wood chips, dust, and other dry particles generated during the processing of wood, metal, plastics, and composite materials. Its robust construction and high static pressure make it an ideal solution for large-scale industrial dust collection systems. Key Advantages High airflow capacity up to 15,445 m³/h for efficient extraction from multiple machines Powerful 11 kW motor for reliable continuous industrial operation Heavy-duty steel housing resistant to mechanical damage and corrosion Versatile application for sawdust, wood chips, dust, and other dry bulk materials Energy-efficient and low-noise operation optimized for long production cycles Flexible installation options for integration into customized extraction systems Construction and Technology The CORMAK FAN 11 utilizes a high-efficiency centrifugal impeller engineered to generate substantial airflow while maintaining high static pressure. The dynamically balanced impeller provides smooth operation with minimal vibration, while the welded heavy-gauge steel housing ensures excellent durability in demanding industrial environments. Designed for continuous-duty operation, the fan offers long service life with minimal maintenance requirements. Performance and Efficiency A precision-balanced impeller, industrial-grade electric motor, and optimized cooling system enable the FAN 11 to maintain outstanding performance during prolonged operation without overheating. Its high airflow and strong suction pressure make it ideal for extracting sawdust, wood chips, and fine dust from large woodworking machines, centralized collection systems, silos, and automated production lines. Rcjdovugfwjpfx Ahcsf Applications The CORMAK FAN 11 is ideal for: Woodworking shops and furniture manufacturing plants Metalworking, plastics, and chemical processing industries Agricultural storage facilities and grain drying installations Automated production lines with centralized dust extraction Pneumatic conveying systems for dry industrial materials Standard Equipment Complete centrifugal fan assembly with 11 kW motor Heavy-duty steel housing with inlet and outlet flanges Industrial centrifugal impeller designed for continuous operation Optional Equipment Inlet and outlet diameter reducers Installation and mounting kits Cyclone separators and filtration systems Technical Specifications Parameter Value Maximum Airflow 15,445 m³/h Inlet Diameter 350 mm Outlet Diameter 350 mm Static Pressure 3187–2019 Pa Motor Power 11 kW Power Supply 400 V Dimensions (L × W × H) 920 × 1050 × 1060 mm Weight 170 kg

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Rcedpfxeq Sp Hpj Ahcef Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2026, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Rjdpeq Sp Evofx Ahcecf Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Rcodpfx Aezt Ipkjhcsf Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Feralco Year of manufacture: 2021 Included in the scope of supply: 01x Pallet racking crossbeam, used Material color: RAL 2004 orange Box profile: 80 x 50 mm Crossbeam type: 80 E15 Redpfx Ahozwkp Uococf Agraffe: 3 HK (hooks) Clear width: 2,700 mm Max. load per crossbeam pair: 1,500 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Rsdpszwfbxsfx Ahcjcf Type: 8-pocket rotary airlock Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Outlet size: 510 x 510 mm Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Year of construction: 2017, condition: used, Manufacturer : Chauvin Modèle : RSMB 60HH Rodpfx Aezwx Hhohcecf Year: 2017 Type: Vibrating sieve ATEX classification: ExII2 GD Exe IIC Grid diameter: 600 mm (=0.31 m²) Separation level: 1 Number of sieves available and in operation: 3 (104, 141 and 250 µm) Motor power : 0,6 kW Material : stainless steel Operating video available on request Dimension : 100 x 120 x 120 cm Weight : 200 kg

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 83670 € 1581.36 € 810 mm 610 mm 800 x 400 mm 800 x 400 mm 5 - 25 m/min 0 - 2.250 mm/min 450 mm 0 - 675 mm/min 480 mm 500 - 2200 1/min 3,75 (optional 5,5 / 7,5) kW 1.5 kW 3250 mm 3075 mm 2250 mm 2900 kg 175 kg 350 kg 355 x 50 x 127 mm 1,1 kW Fully enclosed splash guard 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed Rcedpfx Ahezwqa Hecjf heavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearings hardened and ground C2 grade ballscrew on crossfeed and elevation hardened slide ways electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation grinding wheel grinding wheel flange grinding wheel balancing stand LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONS (PRICES ON REQUEST): autom. dressing attachment mounted over the wheel version without fully enclosed splash guard