Used Cyclone Separator for sale (6,888)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Hfjdjw Sgnkjpfx Ag Ejn Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Hfodpfx Ajhkzu Ajg Een Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, mileage: 87,469 km, power: 70 kW (95.17 HP), first registration: 03/2023, fuel type: diesel, overall weight: 2,054 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 4,488 mm, total width: 1,859 mm, total height: 1,812 mm, loading space length: 1,650 mm, loading space width: 1,350 mm, loading space height: 1,250 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 8 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Very well-maintained, accident-free Mercedes-Benz Citan 110 cdi, with many extras and perfect maintenance condition. The vehicle comes from its first owner, has a complete service history, and is in very good overall condition. MOT/emission test (TÜV) NEW - valid until 10/2028, plus recent service, including front and rear brakes. Summer and winter tires are included.----The service has been carried out directly at Mercedes-Benz until recently, at 38,000, 54,000, and 87,400 km (09/2026). Hfodpoz Sw Dmofx Ag Esn ----The numerous extras include, among other things, an automatic transmission, tow hitch, Audio-Navigation System Plus, MBUX, cruise control, Active Safety Package (exterior mirrors with blind spot assist, speed limit assist, active brake assist, active lane keeping assist), Parking Package (active parking assist, Parktronic system, reversing camera), Comfort Seat Package (height-adjustable seats, seat heating), tire pressure monitoring system, spare wheel in driving condition, lumbar support, air conditioning, sliding door rail cover in vehicle color, LED interior lighting, ISOFIX, exterior door handles in vehicle color, light and rain sensor, instrument cluster with color display, (...).----Permissible total weight: 2054 kg Unladen weight: 1652 kg Payload: approx. 402 kg Wheelbase: 2716 mm Cargo area L x W x H (approx. in cm) 165 x 135 x 125 Emission class: EURO 6d Truck registration Warranty possible with additional payment VIN: W1V4206231U326250 COC document available 2 keys ----Errors, changes, and prior sale are reserved ----Special equipment: Sliding door rail cover in vehicle color, Active Safety Package, Audio-Navigation System Plus, All-weather floor mats, Lockable glove compartment, LED interior lighting, ISOFIX mounts for child seat in the rear seat, Instrument cluster with color display, Fuel filter with water separator, LED lighting in the cargo area, Lumbar support, front left seat, Multimedia system MBUX including navigation and DAB, Parking Package, Driving Assistance System: Active Parking Assist, Parktronic system (rear), Spare wheel in driving condition, Comfort Seat Package, Seat heating, front, Seat heating, front left, Front right seat adjustable in height, Seat cover / upholstery: fabric (Norwich), Steel rims 6x16, Start/Stop system, Exterior door handles in vehicle color, Preparation for Traffic Information System Live Traffic Other equipment: Airbag driver/passenger side, Anti-slip regulation (ASR), Exterior mirrors electrically adjustable and heated, both, Design and equipment line PRO, Audio system MB with DAB, Plastic flooring in the cargo area, Light alloy wheels, Light alloy wheels, Steering wheel with multifunction, Parking brake electric, Rear tailgate doors without glazing (opening angle 180 degrees), Infotainment system: Mercedes me connect, Body/structure: Box van, Communication module (LTE) preparation Mercedes me connect, Head-Airbag-System (Windowbag), Cargo area without windows, Steering column (steering wheel) mechanically adjustable, Mercedes-Benz emergency call system, Engine 1.5 Ltr. - 70 kW CDI CAT, Radio reception digital (DAB) preparation, Wheelbase 2716 mm, Low emission according to exhaust standard Euro 6d, Headlights H4, Sliding door cargo/passenger compartment right, Side airbag (sidebag) front, Front left seat adjustable in height, Preparation for Remote Service Plus, Warning system for seat belts, driver/passen

Condition: excellent (used), Year of construction: 2019, BEAM MODULO 400 Year Mfg 2019 Siemens Control Build Volume: Approximately 650 × 400 × 400 mm (or roughly 600 × 400 × 400 mm operational) Hedpfx Aezvlhpeg Eofn with continuous 5-axis motion kinematics Laser Source: Ytterbium fiber laser options ranging from 500 W up to 2 kW Deposition Heads/Nozzles: Supports an automatic tool changer to swap between different heads (e.g., the 10Vx for fine precision down to 0.1 mm and the 24Vx for higher deposition rates) without stopping production Powder Delivery: Equipped with a vibrating multi-hopper powder feeder system capable of managing up to 4 or 5 separate material feed options

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Hodpfx Ajzgci Esg Esfn Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2024, ---- includes aftercooler and water separator! Hsdpfx Agjz Sxapj Eefn UVV certificate – new, valid until 09/2027.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing Hedpfx Aszxc Rmsg Ejfn The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg Hfjdpfx Agez Sr Uyo Eon - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: new, Clean air dust collector AL-KO POWER UNIT 300 P Hjdpfx Agou R S A Rj Esfn -Exhibition model- Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 300 mm, Nominal air flow rate: 5,089 m³/h, Maximum air flow rate: 6,000 m³/h, Maximum vacuum: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, According to: GS - HO - new exhibition machine -

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Hsdpfxjzdtffo Ag Ejfn Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4" Fully automatic miter bandsaw machine – KASTO Type/Model: KASTOpos GA 4 Condition: Used, partially overhauled in 2026 Year of manufacture: 2002 Work performed / partial overhaul • Machine thoroughly cleaned and technically inspected • Machine housing and machine body repainted • Mechanical, hydraulic, and electrical functions checked • Saw blade, material clamping device, and feed system checked and adjusted • Band guide and all machine movements checked for proper function • Safety and control elements checked • Necessary repair work carried out as part of the partial overhaul • Final complete functional test performed • Roller conveyor disassembled, cleaned, technically inspected, and repainted Hfsdpfx Aoz Sqlkog Ejn • Rollers and bearing points of the roller conveyor checked • Roller conveyor then reassembled and functionally tested The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul. Technical data Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm Cutting speed, stepless: 16 to 160 m/min, frequency-controlled Material feed (single stroke): max. 750 mm Shortest remaining piece length: Automatic: approx. 100 mm Single cut: approx. 10-30 mm Saw motor power: approx. 4.4 kW Total connected load: approx. 7.4 kW (380 V / 50 Hz) Machine weight: approx. 3,000 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: used, mileage: 3,000 km, power: 140 kW (190.35 HP), color: white, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: A4M All-wheel drive 4x4 with torque-on-demand, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CA3 Active Steering Assist, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, D50 Fixed partition, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E30 Battery main switch, single-pole, E3J Pre-wiring for switch panel, E43 Trailer socket 13-pin, E4A Antenna interface for radio, navigation, and mobile phone, E4S Smartphone integration package, E5M Expansion PSM standard connector, E7B DIGITAL EXTRA: PRE-WIRING FOR NAVIGATION, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, ES0 Jump start assistance, ET4 Active Distance Assist DISTRONIC, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F64 Exterior mirrors electrically foldable, F68 Exterior mirrors heated and electrically adjustable, FF5 Stowage compartment above the windshield, FJ1 Folding cover for stowage compartment, FJ4 Stowage compartment under the cockpit, FM3 WET WIPER SYSTEM, FU5 Exterior mirrors without indicators, FY7 Multi-button remote control, G031 GEARBOX DESIGN 031, G43 9G-TRONIC, H15 Seat heating for front passenger, H16 Seat heating for driver, H1B Operation of tachograph in front under the headliner, H21 Heat-reflecting glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IR4 Wheelbase 3665 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JD6 Intelligent tachograph EU, JF1 Rain sensor, JF7 Start-off information assistant, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JK8 Driver camera, JM2 Extended automatic restart on highways, JM3 Route-based speed adaptation, JM4 Active Speed Limit Assist, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, K51 Anti-misfueling protection, KB7 Main tank 93 liters, KL5 Fuel filter with water separator, L LEFT-HAND DRIVE, L13 Fog lights with cornering function, L21 Reversing light below, L22 Rear lights in partial LED technology, L65 Ceiling light(s) in driver cabin / passenger compartment with door contact, L94 Omission of parking light, LA2 Driving light assistant, LB5 3rd brake light, LC2 LED light band in the cargo area, LE1 Adaptive brake light, LG7 LED High Performance headlights, M60 Generator 14 V / 250 A, MI9 Omission of Eco Start-Stop function, MP6 Engine design Euro VI, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, P2L Cargo area package 2, P47 Mud flaps front, P48 Mud flaps rear, P4F Rating country set Euro-NCAP, Q10 Crossmember for trailer coupling, Q11 Longitudinal member reinforcement, RG8 Tires 225/75 R16 C, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, S02 Driver's seat, S23 Co-driver's seat, two-seater, SA5 Airbag driver, SA6 Airbag co-drive Hsdpfxoy Uqyqs Ag Eefn

Condition: ready for operation (used), Fanuc A06B-0163-B577#7000 - A06B-0163-B577 #7000 AC servo motor, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately. Hodpfx Aei D Hxweg Esfn

Condition: ready for operation (used), Fanuc A06B-0163-B677#7000 - A06B-0163-B677 #7000 AC servo motor, serial number as shown in the photo, professionally and completely refurbished and tested with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately. Hodsi D Hybepfx Ag Eefn

Condition: ready for operation (used), Fanuc A06B-0163-B677#7000 - A06B-0163-B677 #7000 AC servo motor, serial number as shown in the photo. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately. Hedsi D Hymjpfx Ag Eefn

Condition: ready for operation (used), Fanuc A06B-0266-B100#0100 AC servo motor, serial number as shown in the photo. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Hfodpfx Agji D Hz Se Een

Condition: ready for operation (used), Fanuc A06B-0273-B100#0100 AC servo motor, serial number as shown in the photo. Professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately! Hfsdpfx Aei D H Atsg Een

Condition: new, Bosch SE-B5.700.020-10.000 Brushless servo motor, No. 1070915175 SN, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Hodpfx Agji D Hd Ss Eefn

Condition: ready for operation (used), Bosch UFV 160M / 4B-21S / 739 / 342776-1 servomotor, UVF 160M / 4B-21S / 739 / 342776-1 / 107-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire for charges for packing and transport separately! Hodpfx Agsi D Hg As Ejfn

Condition: ready for operation (used), Bosch UVF 112M / 4B-11S / 324/3375325-2 servo motor, serial number: 1070914200, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Hodpfxei D Hhcj Ag Eefn

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / Servomotor, 104-914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Hfsdpfx Aoi D Hhrsg Een

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S /527 / 55432-1 servomotor, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Hfjdpfx Aok Ru Dcsg Eon

Condition: new, Brinkmann SGL802 / 390-Z+002, serial number: 0411003202-61066001, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Hfjdpfx Asi D Hitog Een

Condition: ready for operation (used), Bosch SD-B3.000 Brushless, permanently excited synchronous servomotor, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire separately for the price! Hfsdpfsi D E S Sox Ag Eon

Condition: ready for operation (used), Bosch SDB5.250.015-01.000, brushless, permanent magnet servo motor, serial number: 350000065, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Hfodpfx Agji D E U Ae Ejn