Used Cut Off Machine for sale (71,185)

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm Cedpfx Aoy Auxmjirogu 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control ä3626

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter system for outdoor installation 1 x Nesting program on the machine control system Availability: immediately Cedpfx Ajytqmmjirogu 3626ä

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and rail Cgjdjykruaepfx Airju ä3626

Condition: used, Year of construction: 2006, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Track gauge: 4,000 mm Track length: 15 m Cgodpfx Ajykpd Ejireu Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system ä3626

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm Cjdpfjyhd Rbex Airjgu 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate ä3626

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Csdpfx Ajwh R R Njirsgu

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control Cgedpfxsyay H Ae Aireu ä3626 Availability: May 2026

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Cjdpsyfl U Njfx Airegu

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 403 6079, functionality: fully functional, overall weight: 220 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 220 kg Cutting angle: 45 degrees Tools used: All milling and cutting tools must comply with DIN EN 847-1 and be appropriately matched in terms of operating speed to the rotational speed of the milling motors. Milling cutter: Ø 150x30x3.0, 32 teeth Cutting blade: Ø 300x30x2.6, 96 teeth GLA 403 OPERATING MANUAL Material to be processed: PVC window frame strips: Profile length: min. 200 mm (dependent on the length of the fence) Profile height: min. 5 mm max. 50 mm Cgjdpfx Ajwhpp Roirju Profile width: min. 10 mm max. 50 mm Tool clamping: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (alternating current) Power consumption: 2.2 kW Protection: 16A (time-delay) Saw motors: 230/400V; 4.0/2.3A 1.1 kW; 50 Hz; 2860 rpm Pneumatics: Working pressure: 5-6 bar Maximum pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min per saw cut Fitting: NW Ø 9 mm Permissible temperature during operation: min. 15°C and max. 40°C

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC Control: Global Control Plus Year of Construction: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 Oxy-fuel torch ALFA 1 Plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC Our own technicians are available for installation, commissioning, and training! All spare parts are in stock. 3626ä Cgsdpoiff Dajfx Airou

Condition: used, Year of construction: 2012, CNC laser cutting system Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Cgjdpfx Aiex Eh Drsreu Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3626

Condition: used, Year of construction: 2006, CNC gantry cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches Cgjdpfx Aiow El Udjrju 3626 operating hours

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm Cgjdoudn Rzepfx Aireu 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the portal Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic height control via arc voltage USB 2.0 connection for storage media Module remote diagnostics MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 burner Power cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma labeling system FineMarker CNC interface for FineMarker / connection to the CNC control Module for the automatic control of the marking device 3626

Condition: good (used), Year of construction: 2007, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of manufacture: 2007 CNC control Csdpfeuv Hkgox Airegu 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE 3626ä

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump Codpfx Aioy Urzisrsgu – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: used, Year of construction: 1995, CNC gantry cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torch, type ALFA 8 x Omnilift 200 Without rail Cgedpfxeyay Dhe Airou Without table Without filter 3626ä

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche Cjdpfx Aisgqkc Neregu without tracks without table without filter

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm Csdpfshwrp Rsx Airegu 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Machine height: 1600mm Weight: 1500kg

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 47,813 h, machine/vehicle number: 302C104, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Prima Power, laser source model: CP 4000, laser hours: 42,420 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, type of cooling: water, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, We are offering this used Prima Power Zaphiro 1530 laser cutting machine, manufactured in 2010. The machine was last operated as a standalone unit and is still functional. Csdpfx Ajy Umv Ujirsgu The PC and software are already running under VM Ware. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 310 mm, warranty duration: 12 months, pump pressure: 2,000 bar, power: 3.7 kW (5.03 HP), OMAX ProtoMAX® – the smallest industrial-grade waterjet cutting system in the world! Its compact design, combined with its comprehensive versatility, makes the ProtoMAX® waterjet cutting system a perfect solution for applications such as the production of small batches and prototypes, as well as for educational purposes. Furthermore, the ProtoMAX® can also be used as a complement to larger waterjet cutting systems. Thanks to its small footprint, the ProtoMAX® waterjet cutting system is ideally suited for smaller spaces. Mounting the system on rollers allows for easy and straightforward relocation. ✔ 3.7 kW pump with 2,000 bar operating pressure ✔ Cutting thickness up to 25 mm for a wide range of materials ✔ Efficient and reliable pump technology with direct drive ✔ Includes laptop with pre-installed CAD/CAM software ✔ Quiet and clean underwater cutting (< 76 dB) ✔ Protective cover with safety switch ✔ Clamping device for securing the material Cgedpfx Aioy Umphjrou A timely delivery can be arranged with INNOMAX AG. This is a demonstration machine.

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive Cedpfjy Umhkjx Airjgu • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Codow I D Iajpfx Airegu Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components).

Condition: used, Year of construction: 1997, Fully automatic index cutting machine Equipped with: Feeding Opening Counting/cutting 1 Counting/cutting 2 Printing station 1. colour Printing station 2. colour Delivery Technical data: Max. size: 185 x 130 mm Min. size: 50 x 60 mm Book thickness max. 15 mm (depending on product) Binding category: all standard binding sorts Cover bendable (no hardcover) Cut form angular cut Types Printing European/Arabic index combined indexes double and multiple indexes Cgedpfx Aiey Syuljrju Printing: one or two colours letters and words Dürrer promotional/explanatory video:

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2025/1, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 36 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing metal, stone, and concrete surfaces. Delivery is available within Germany and Austria. As a service provider specializing in surface processing, we can offer you machines tailored to your requirements! Transport costs: Depend on your location and delivery terms Delivery: 4 weeks (working days) after receipt of payment via air freight - Air freight duration: approx. 2 weeks The equipment is NEW and is configured and set up according to customer specifications! Configuration and pricing depend on the customer's requirements and application area. We offer professional training in the operation of the equipment in compliance with UAVA/UVV regulations in both Austria and Germany. As we are a service provider with hands-on experience using our equipment, we can guarantee their functionality. We provide comprehensive on-site instruction, workshop-based training, or customer-specific demonstrations. Payment options: RENTING / LEASING / PURCHASE Technical specifications: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser wavelength: 1064nm or 1080nm±5 Frequency: 10–50KHz Air or water cooling Cgedpfx Aetxlyrjirsu Net weight: approx. 170kg Dimensions: 98 × 122 × 143 cm Scan width: 5–50 cm Functions: Handheld or automatic Operating temperature: 0–40°C Operating mode: CW Wavelength (nm): 1025–1070 Standard output power: 15KW Laser beam quality (mm*mrad): 4 Adjustable frequency (Hz): 400 to 50,000 Transmission fiber diameter: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature (°C): 5~35 GUARANTEED at the best price! – RENTING / LEASING / PURCHASE All devices are individually assembled and delivered according to your requirements and our experience. – Product demonstration – 24-hour support – Includes maintenance, service & repair We also provide: INDIVIDUAL training in accordance with the UAVA / UVV safety regulations for commissioning laser machines for surface processing. Comprehensive safety consulting regarding the use of laser equipment in compliance with occupational and safety regulations. Routine inspections in accordance with applicable safety standards.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Puls 300, control type: manual, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 300 W, laser wavelength: 1,064 nm, power: 5 kW (6.80 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: DC, type of cooling: air, overall weight: 64 kg, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, !! New Series 2026 !! Cgsdpfx Aieufgnhsrsu Pulse Laser Cleaning Machine 100W to 1000W - Cleaning and processing of metal / wood / stone and other materials - 300W 1-10mj Air cooled €22,650 - 500W 15mj Air cooled €32,000 - 500W 15mj Water cooled €42,000 - 1000W 20mj Water cooled €64,000 The machines are BRAND NEW and configured and set up according to customer requirements! The configuration and price depend on the customer’s specifications and application area and are programmed with our proprietary software! We provide professional training for operating the equipment in accordance with UAVA / UVV standards in Austria and Germany. As we are service providers and work with these machines on a daily basis, we can guarantee their functionality. We offer comprehensive on-site introductions or workshops at our premises, as well as customer-oriented demonstrations in Germany & Austria.