Used Cut Off Machine for sale (92,471)

Condition: good (used), Year of construction: 1992, Ref. -No.: 10582 Manufacturer: SCHARMANN Type: FB 75 Opticut Year of construction: 1992 Type of control: CNC Fsdpfxow Thnus Afispn Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany Machine-No.: 141XXXX X-Travel: 850 mm Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK 40 Turning Speeds: 15 - 1250 RPM spindle quill: 75 mm

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 1200 kg Control Unit Brand FANUC Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Fpedpfxoxf N Rmo Afion Y-Axis Movement 220 mm Z-Axis Movement 255 mm V-Axis Movement 120 mm U-Axis Movement 120 mm This 5-axis FANUC Robocut alpha-0iC was manufactured in 2006. It features X-axis movement of 320 mm, Y-axis of 220 mm, and Z-axis of 255 mm. It can handle workpieces up to 500 kg and has a machine weight of 1200 kg. Consider the opportunity to buy this FANUC Robocut alpha-0iC wire edm machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm Fedpfsw Spa Nex Afiopn travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Fpsdpfxou Tg Spo Afijn Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Equipment: Fodpfjvfxw Hsx Afiopn cutting thickness 40 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle: +/- 30°, 100 mm Travel (U/V): +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power module Machine dimensions (mm): 1640 × 2040 × 2220 mm Machine weight: 3350 kg Fpjdpfx Ajxgpnzjfijn Cooling: external cooling required Best surface finish: Ra 0.2 µm Year of manufacture: 2006 Fully functional

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutting machine. Model C780-M8. This paper cutting machine comes from a government agency and has seen very little use. Complete with all standard accessories and chrome table. This machine is 100% operational. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Please request a price including transport (location: the Netherlands). Regards, Henk Hoos. Fpsdpfx Ajw E I Elsfijn

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Brand FANUC Fodpfxsxf N Rts Afijpn Main Drive Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 370 mm Z-Axis Movement 310 mm V-Axis Movement ±60 mm U-Axis Movement ±60 mm Workpiece Workpiece weight 1000 kg This 5-axis FANUC ROBOCUT alpha-1iC wire EDM machine was manufactured in 2006. It features X-axis movement of 550 mm, Y-axis movement of 370 mm, and Z-axis movement of 310 mm. It can handle workpieces up to 1000 kg and has a machine weight of 3000 kg. Consider the opportunity to buy this FANUC ROBOCUT alpha-1iC wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min Fedpfx Aow Spbtefiopn rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: good (used), Year of construction: 2015, max. size 32 x 67 cm age 2015 scoring and perforating machine fully automatic setup Fpedpfexc Ht Hex Afisn cutting - creaing - perforating in one pass Delivery time: immediately

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 20.4007.08/208-030, working range: 3,000 mm, sheet thickness (max.): 60 mm, total length: 13,000 mm, table length: 12,500 mm, table width: 3,000 mm, The non-functional machine can still be restored to working order with various repairs. The following machine components are defective and must be repaired: - Computer defective (computer not included) - Height control defective Fsdpfxexfki De Afiopn - Cable break in control wiring The flap extraction table was renewed around 2017 and is operational. Power source: Kjellberg Fine Focus 800 (last operated in 2024) IHT PCS 2100 Linear Drive The machine must be dismantled and loaded on site by the buyer. An existing fully functional extraction system can be purchased separately if required (price negotiable).

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition Fedpfx Aoxciumsfispn

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Fjdsxfaqkopfx Afispn Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm Fpsdpfjwpincsx Afijn - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Year of construction: 2020, operating hours: 4,200 h, condition: ready for operation (used), General Data Measurements width 2680 mm Measurements depth 2790 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-WB Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Fpjdexbihwopfx Afion Workpiece weight 1000 kg Media Power consumption 13 kVA Air pressure 0.5 – 0.7 MPa Additional Equipment Automatic Front Door Option 45° Die Guide: Max Taper Angle ±45° / 70 mm 30 kg Wire Feed Unit: Max Wire Weight 30 kg This 5-axis FANUC Robocut alpha iB600 wire EDM machine was manufactured in 2020. It features a maximum workpiece size of 1050 × 820 × 300 mm and can handle weights up to 1000 kg. The machine includes UV axis travel of 200 × 200 mm and a maximum taper angle of ±30°. Equipped with a FANUC 31i-WB controller, it offers precise control and efficient operation. If you are looking to get high-quality EDM capabilities, consider the FANUC Robocut alpha iB600 machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), functionality: fully functional, Multifinisher Duplo Docu Cutter DC-545 HC Max. paper size SRA3 Automatic cutting head adjustment Electrical connection 230V, 50Hz Weight 100kg Fsdpexa Ddwefx Afiepn

Condition: ready for operation (used), functionality: fully functional, Swingbeam die cutting machine ATOM in perfect condition for footwear cutting in perfect condition Fedpfoxcpikex Afispn

Condition: excellent (used), Year of construction: 2019, X 2000 mm, extended by Scharmann to 2500 mm. Y 1200 mm Z 1000 mm W 600 mm B 360° // 0.001° Spindle speed range: 8 - 3000 rpm. Faceplate: 600 mm Tool changer with 40 positions. Table size: 1200 x 1650 mm Fpjdjw U Dh Hjpfx Afien Control: Siemens 840 D SL (complete retrofit in 2019) Spindle diameter: 125 mm Taper: SK 50 Speed: 8 to 3000 rpm In 2019, the machine was completely overhauled by Starrag (Scharmann).

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit Fodpfx Aoul Uwlofiepn - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Fodoxb A Tgopfx Afispn Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Condition: good (used), Year of construction: 2021, functionality: fully functional, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 1,100 kg, workpiece weight (max.): 900 kg, Equipment: documentation/manual, Swiftcut pro 3000 CNC plasma with 3000x1500 working area, year of manufacture 2021. Fpsdpfx Aexbizqjfien

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, For cutting uniform cubes, strips and slices from various products, such as potatoes, vegetables (carrots, celery, etc.) and fruit. Fpsdpjxbcr Aofx Afion

Condition: new, Year of construction: 2020, MEAT PROCESSING MACHINE Capacity: 120 litres Year of construction: 2020 Cutting head with 6 blades Touchscreen + membrane controls Bowl capacity: 120 l Operating voltage: 400/380 V/50 Hz Fpodpfxsqrtv Ho Afijn Total machine power: 42.5 kW Variable blade speed: 40–5000 rpm Mixing speed (forward and reverse): 40–500 rpm Variable bowl speed: 5–18 rpm Weight with unloader: 1,650 kg Manual unloader Advanced CutControl and CutVision software

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Fpedpsw Rqu Sjfx Afijn

Condition: good (used), Year of construction: 2010, operating hours: 5,400 h, machine/vehicle number: 13668, Laska vacuum cutter with low running hours. Machine is in good condition and has previously been used in a UK sausage factory until they closed in 2019. Tote bin loader Emptier Newer style touchscreen controls - fully programmable Can be seen running. Fpsdpfx Afjw Rn Rdoien