Used Crushed for sale (864)

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph Model : VSI 900 -CR Iedpex A R Egefx Affoik Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: used, Cast Iron bed plate tee slotted 6m x 2.2m, Approx weight 10 Tons, we can load to buyers transport with overhead crane. note there is one 6inch hole that has been burned out in the table as shown in the images. Iisdpfxjxp Ib Ss Affek

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). Iisdpevrw Ansfx Affok ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: excellent (used), functionality: fully functional, power: 382 kW (519.37 HP), fuel type: hybrid, fuel consumption per hour: 50 l/h, color: yellow, overall weight: 64,000 kg, empty load weight: 64,000 kg, operation weight: 64,000 kg, first registration: 11/2023, emission class: euro5, Year of construction: 2023, operating hours: 1,200 h, machine/vehicle number: 832300100, Equipment: AdBlue, additional headlights, soot filter, The H6e cone crusher from Keestrack is a top-tier mobile tracked cone crusher offering maximum operational flexibility. It excels in Secondary, Tertiary or Quaternary applications in quarrying, mining and aggregate production. The H6e is standard in e-drive: full hybrid diesel-electric and plug in version. It uses a proven pressurized cone technology with automatic release system, rotational indication & slip control & overload protection. And has a removable engine/generator unit which can be placed on the frame of the crusher, or besides the machine in a less dusty and vibrant environment and a easier maintenance access. Options on this machine: - Secondary Screen: 3 Deck With Return Conveyor And Side Discharge conveyors - Radio Remote Control 10 Function - Light Holder With 4 Led Lights 45 Watt, 4500 Lumen - Central Grease System Impacter -series with secondary screen - Water Pump Water Pump CALPEDA CA 91/A Iodpfx Aox E Smgeffjik - Umts Modem With Gps Tracking System Telematic Without Sim Card - Hopper Extension Left - Right – Rear

Condition: ready for operation (used), Jaw Crusher Böhringer Iodpfx Afew D Nrdsfoik Feed Opening: 800 x 200mm Driving: E-Motor 30 kW

Condition: used, Year of construction: 2017, Field of application: Mining Empty weight: 1.250 kg Manufacturer: Tietjen Type: NDK 5.2-S Year: 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Iedpfxsx Au Aij Affsik Bearing temperature monitoring Pneumatically operated inlet flap

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Iiodpfsx Av U Tox Affjk 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: used, power: 22 kW (29.91 HP), Year of construction: 2003, Circular vibrating screen Screen area: 7,000 x 2,250 mm Motor stand with drive components Isdpfsulu Nbsx Affeik Lower deck with piping and spray system

Condition: new, Year of construction: 2025, RA-800 ASPHALT RECYCLER A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes Iodpjt Ifxlofx Affsik from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection.

Condition: used, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20763 Specifications: Approx. 2006-2007 model (stated by owner) Total hours: 13,800 (can increase) Chassis (see pictures) Central grease, some manual points Ijdpfowvzraox Affjik Comes with an extra jaw (recently replaced) Hanging sieve Tape and rolls (see pictures) Main band completely overhauled with new band and side edges Daily operations Video is attached Deutz engine (provided by owner) Ready for delivery Notes: An output psb nd is worn Own weight: 48000 Model: Ca. 2006 Sandvik 1208 Knuser med Sandvik hengesikt. God stand!

Condition: ready for operation (used), Percussion Mill MFL Type R-CI 100-100 Feed opening 1020 x 760 mm Power: 90 kW E-Motor Isdpfjwbbivsx Affjik Weight 9 Tons

Condition: used, power: 5 kW (6.80 HP), Year of construction: 1990, Field of application: Mining Manufacturer : Fryma Iiedpfx Afsx Att Hsfjk Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Condition: used, Field of application: Mining Unveiling the PTV800: A High-Performance Track-Mounted VSI Crusher The PTV800 model of our track-mounted VSI (Vertical Shaft Impact) crusher is engineered for excellence in the most demanding crushing applications. With a robust rotor type, optimized for closed settings, this crusher delivers unparalleled efficiency and precision. The closed rotor design enhances the crushing process by ensuring consistent particle size and shape. This feature makes the PTV800 ideal for applications requiring precise material output, such as sand production and tertiary crushing. Its robust construction and innovative design ensure that it performs reliably even in challenging environments. Exceptional Feed Size Handling and Efficient Design The PTV800 is designed to handle a maximum feed size of 38 mm, making it suitable for a wide range of materials. This capability ensures that the crusher can efficiently process different types of input materials, from soft stones to hard minerals. The design incorporates advanced technology that maximizes material throughput while minimizing energy consumption. This balance between capacity and efficiency is crucial for operators who require high productivity without compromising on quality. The design ensures consistent operation, enhancing the overall performance of the crushing plant in various industrial settings. Heavy-Duty Construction and Optimal Weight Isdpfox Av U Hox Affeik Weighing 39,000 kg, the PTV800 is built for stability and durability, which are essential for heavy-duty crushing applications. This weight ensures that the machine remains stable during operation, reducing vibrations and enhancing precision. The solid construction provides a long lifespan, reducing the need for frequent maintenance and repairs. This durability translates into cost savings for operators, as it minimizes downtime and extends the equipment's operational life. The PTV800 is engineered to withstand the rigors of continuous use, making it a reliable choice for businesses focused on long-term performance. Compact Transport and Efficient Operation Dimensions The PTV800 boasts compact transport dimensions of 16,100 x 3,100 x 3,200 mm, making it easy to move between sites. This compactness ensures that operators can quickly deploy the machine in various locations without incurring significant transport costs or delays. Once set up, the operation dimensions expand to 15,050 x 3,100 x 4,350 mm, optimizing the space for efficient crushing operations. This balance between transport and operational dimensions ensures maximum flexibility and adaptability, crucial for projects with tight space constraints. The design facilitates easy setup and operation, enhancing the machine's versatility across different job sites. Powerful Dual Motor System for Maximum Efficiency The PTV800 is equipped with a main motor system of 2*165 kW, providing the power needed for demanding crushing tasks. This dual motor configuration ensures that the crusher operates at optimal efficiency, even under heavy loads. The motors are designed to deliver consistent power output, enhancing the crusher's ability to handle high volumes of material. This power configuration is complemented by advanced control systems that optimize performance and reduce energy consumption. The dual motor system provides the flexibility needed for varying operational demands, ensuring the PTV800 maintains high...

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Iiedpfx Afsv Tdq Iefsk Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder Iisdpfsx Aidbox Affek o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Iisdjvg A D Topfx Affsk Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd

Condition: ready for operation (used), SBM Austria stationary crushing plant consisting of: *Hopper *Vibrating chute: 3500 x 1000 mm driving: two pieces vibration motors of each 4 kw. *Grizzly screening machine 2000 x 1000 mm, 2 decks driving: 11 kW e-motor. *Percussion crusher type: RHS 13/11/4 feed opening: 1100 x 1000 mm driving: 160 kW e-motor. *Including steel construction and discharge conveyors. Iijdpex Evc Sjfx Affek

Condition: used, power: 4 kW (5.44 HP), Field of application: Mining Manufacturer: Frewitt Fribourg Model : MGH-6-003 Type : Hammer mill Materials: Stainless steel Classification : Atex Iiodpfx Afex Akb Usfjk Motor Felten & Guilleaume : 4 KW Rotor milling tool : 260 mm Grinding chamber depth: 19 cm Product output : Ø 250 mm Product feed - >Rotary valve : Frewitt DR 0150 3 (0.12 KW) Various screens supplied with the equipment: 400 - 425 - 450 - 500 µm.

Condition: used, power: 74 kW (100.61 HP), color: grey, Field of application: Mining Empty weight: 34.500 kg Dimensions (LxBxH): 1756 x 346 x 360 cm Make of engine: Perkins Productivity: 120 tph Screen Decks 3- Triple Screen Size 5,200 x 1,520 mm Weight 34,500 kg Drive Hybrid Motor Perkins/Cummins/Volvo Angle 12-18 degrees Iijdpfxjx Av Uyo Affsk Transport Dimensions (mm) 17,560 x 3,458 x 3,604 Operation Dimensions (mm) 19,600 x 14,400 x 6,450

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 360 mm, power: 45 kW (61.18 HP), Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Star-delta start, automatic stop at idle speed - Hydraulic pusher equipped with pressure plates Iodpfx Afot Rivtsfeik - Siemens SPS control system - Optional with control cabinet extension for discharge conveyor + overbelt magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in supplying the customer with exactly what he really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grid, magnetic grate, metal separator, block magnet, filter systems

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,450 kg, Used HSM V-Press 1160 Plus vertical press from 2016. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Iodpfx Afjx Eb Auofsik Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, power: 4 kW (5.44 HP), color: grey, Year of construction: 2002, Field of application: Mining Volume of the tank: 0.22 m^3 Manufacturer : Comec Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Work cycle timer for automatic stop. Double jacket Top loading of liquids Iiodpfxjx Ai Uas Affok Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Condition: used, Field of application: Mining Plant Model PTK156 Iodox Av Utjpfx Affsik Drive Hybrid Motor Volvo-Cummins-Perkins Tier 3-4 Top Deck Size 5,000 x 1,500 mm Bottom Deck Size 5000 x 1,400 mm Weight: 34,500 kg Transport Dimensions (mm) 16,500 x 3,250 x 3,400 Operation Dimensions (mm) 17,400 x 14,400 x 4,450

Condition: used, power: 221 kW (300.48 HP), fuel type: hybrid, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Make of engine: Perkins MODEL PTC300 Isdsx Adl Topfx Affoik Cone Model HP300 METSO Head diameter 1 120 mm (44") Power 220 kW (300 hp) Weight (complete crusher) 18 100 kg (39 900 lbs) Feed opening 241 mm (9 1/2") Maximum capacity 440 Mtph (485 Stph) Max Feed Size 47 - 250 mm Weight 49,400 kg Transport Dimensions (mm) 16,250 x 3,450 x 3,650 Operation Dimensions (mm) 16,200 x 4,490 x 4,500 Drive Hybrid Motor Volvo-Cummins-Perkins Tier 3-4

Condition: used, power: 300 kW (407.89 HP), fuel type: hybrid, color: orange, emission class: euro5, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Empty weight: 54.000 kg Dimensions (LxBxH): 1620 x 325 x 370 cm Make of engine: Perkins Emission class: EEV Productivity: 350 tph Capacity 200 - 350 t/h Opening Size 1,200 x 900 mm Rotor Size 1100x1300mm Weight 54,000 kg Transport (mm) 16,200 x 3,250 x 3,700 Iodpfex Adlyjx Affsik Operation (mm) 16,400 x 6,350 x 4,150