Used Crucible Furnaces for sale (710)

Condition: reconditioned (used), functionality: fully functional, used shop oven / confectionery oven Miwe Condo CO 4.0608, reburbished, 4 decks, with exhaust hood, decks 60 x 80 cm, electrical, serial no. 701888, 400/230 V, 50 Hz Bjdpfxoxyut Nj Ab Todk

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Bsdpforwfqnex Ab Tjdk Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Bdodpfx Ajgm Hwusb Tjk Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Deck oven electric oven Matador Store Type: 6.8. M manual control Bottom heat and top heat individually adjustable for 4 x trays 600 x 800 mm or 8 x trays 600 x 400 mm Herd height 17 cm Bjdpoid Elqsfx Ab Tjdk all stoves with steam shelf below Mobile base with brakes Connection 400V, 4 x 8 kW, 4 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 930x1332x1540 mm, WxDxH used oven Visit our large bakery machine center!

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Rated temperature: 1150 °C, 5.0 kW 400 Volt Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h 75 kg Bdedpfxoxwqhkj Ab Tok With base frame

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: 15 13F-1 PN, CONTROLS .. SIEMENS 15 13F-1 PN 1. General Description The draw-oil preparation system is designed for the optimal treatment of un-drawn tubes prior to the drawing process. A large-volume draw-oil bath ensures homogeneous wetting of the tube surface, providing uniform lubrication, reducing friction during drawing, improving the tube surface quality, and increasing tool lifetime. A constant material flow as well as stable bath temperature and bath quality make this system a critical process step in efficient tube production. _____ 2. Performance Data & Capacities • Tube diameter range: 18–75 mm • Bundle weight: maximum 5 t • Maximum tube length: 9 m • Bath volume: 20 m³ • Electrical supply: 400 V / 180 A / 50 Hz • Operation mode: Semi-automatic _____ 3. Functional Principle Immersion Bath & Medium Conditioning • Uniform lubrication through full immersion in the draw-oil bath • Tubes integrated in the tank walls serve for oil heating via the furnace heat-recovery system • Oil circulation: Chemetall process, 12 cycles per hour • Prevention of water pockets: Precise water dosing; compressed-air injection if required • Bath composition control: Regular sampling • Dosing station: Automatic adjustment of oil and water additives _____ 4. Measurement & Control Parameters The following process parameters can be monitored and controlled: • Immersion time • Drip-off time & park time at all 3 drip stations Bdjdjxwkytjpfx Ab Tek • Crane inclination during immersion • X and Y axis positions • Crane speeds • Cycle types: Mix, Activate/Deactivate, Automatic, Pause, Cycle, Cycle interruption _____ 5. Control System & Safety • Siemens PLC: CPU 1513F-1 PN • Software: TIA Portal V15.1 • HMI: Siemens TP1200 Comfort Panel • Safety concept: Complete risk assessment available • Includes control cabinet, electrical documentation and software backup _____ 6. Automatic Overhead Crane • Type: Matr. 2981 t.6.5 • Travel speed: up to 40 m/min • Class: A6 (FEM 1.001 – ISO) • Wheels: 4 pieces, Ø 315 mm • Track gauge: 13,000 mm • Weight: 8,000 kg • Motor: FC90LFECCL-4, 1.5 kW, IP55 • Brake: Disc brake, DC 400 V • Gearbox: TP 315/90BR, ratio 1/35 _____ 7. Components Included in the System • Loading cart • Immersion tank • Medium circulation pump • Portal crane / automatic overhead crane • Drip-off station • Unloading cart • Extraction system • Dosing unit • Control cabinet & operator panel _____ 8. Documentation • Operating manual • User manual • Electrical & control diagrams • Declaration of conformity • Software backup

Condition: reconditioned (used), functionality: fully functional, used shop oven Miwe aero AE 4.0604, overhauled, for sheets 60 x 40 cm, for 4 sheets, with proofer, hood and swath condenser, new door seal, serial no. 818 730, 8.5 kW, 400/230 V, 3/N/PE, 50 Hz, electric Bdsdpfxjwq Emdj Ab Tek

Condition: good (used), Hello, For sale: Chamber hardening furnace POK 73.1. The machine is fully operational and in continuous use, with the possibility of inspection and testing. Bdodpjxykcajfx Ab Tsk The listed price is net and VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Phone contact available from 7:00 to 16:00.

Condition: excellent (used), Here we offer a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Bdodpsigg Eqofx Ab Tek Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06-06 K111183701 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), functionality: fully functional, Deck oven Sweba Dahlen Model: S-22 S Stainless steel version Manual control Dimensions: 1600 x 1000 x 1800 mm Connection: 400V, 11.6 kW, 32A CEE plug Used oven We have more ovens in stock! Bjdpsw Ttl Ejfx Ab Tedk

Year of construction: 2007, condition: good (used), 918 USED Shop oven, for 3 trays 60x40. It has shelves for trays 60x40 and a Wiesheu proofer. Bdjdpfouif I Ijx Ab Tok The oven is an electric model. EXTERNAL DIMENSIONS (in cm.): - W: 80 - H: 205 - L: 85 TECHNICAL DATA: - number of baking trays: 3, - year of manufacture: 2007 EQUIPMENT: - proofer The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 1992, condition: used, max. temperature 1100 Grad size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm Bdodpfjw Rrf Sjx Ab Tok heating capacity 2,7 kW control "Thermocomputer TC 5040"

Condition: reconditioned (used), functionality: fully functional, used rack oven Miwe Roll-in RI 1.0608-TL electro, overhauled, with hood, with touch display, electrics newly wired, new seals, circulator with new bearings, 72.6 kW, 400 V, 50 Hz, serial no. 47 707 Bdodpowrth Eefx Ab Tok

Condition: excellent (used), Here we offer you a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 10 kVA Bsdpfxeigg Eue Ab Tjdk Heating power: 9 kW Nominal temperature: 250°C weight: 300 kg Type: KU 250/09-06-06 K1030852 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: manual, total length: 1,380 mm, total width: 1,600 mm, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, Modular deck oven with ceramic stone plate for trays 2 x 60x80 / 4 x 60x40 per deck Programmable control with night start Oven chamber dimensions: 1230x900x180 mm, W x D x H per deck Stainless steel construction Temperature up to max. 350°C Only at our company: DGUV V3 tested Connection: 400V, 32A CEE plug Dimensions: 1600 x 1380 x 440 mm, W x D x H (per deck) Brand new unit with warranty + service Water connection: 3/4 inch, water outlet DN 40 Options: Exhaust hood Bsdpfxottry Hj Ab Tsdk Exhaust hood with condenser Mobile base with tray shelf Proofer / electric Fermentation cabinet Peel apparatus Manual loader Maintenance contract Delivery service E-box Commissioning & training Leasing & rental service More top-quality ovens in stock!

Condition: used, functionality: fully functional, used trolley oven system with 2 trolley ovens Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 boiler Heuft KH 200, fabrication no. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 decks per trolley / oven, decks 18.5 cm high each, with used oil burner Weishaupt, outer dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions of the boiler: 105 cm wide, 170 cm deep, 200 cm high, in bakery condition, worked flawlessly until the closure of the bakery Bdjdoxpxddjpfx Ab Tek

Condition: excellent (used), Eliog Here we offer you a chamber circulating air furnace. Usable space dimensions : Height mm 1250 / Width mm 750 / Depth mm 750 Liters : 703 Outer dimensions : height mm 2050 / width mm 1495 / depth mm 1180 Connected load : 3X400V 50 Hz 10 kVA Heating power: kW Nominal temperature: 250°C weight: 500 kg Bedpfxjiivgno Ab Tjdk Type: KU 250 / 12-07-07 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Zwick / Roell Temperature chamber for AllroundLine Bjdpfx Abek Rutpo Tjdk Here we offer you a Zwick / Roell temperature chamber for AllroundLine. Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. External dimensions: Depth 1050 mm Width 600 mm, Height 800 mm Internal dimensions: depth 530 mm width 450 mm, height 650 mm Temperature chambers for the AllroundLine Cooling by means of LN2(liquid nitrogen) -80°C connection to external, is not included) Type: EC75A-1-0-1-0 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), TA-Instruments Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Temperature range (max.) -150 to 1,000 ˚C Temperature accuracy ± 1 ˚C Furnace cooling time (air cooling) Bedpohukh Nefx Ab Tjdk

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) Bjdpfow Ec Egex Ab Tedk For further questions, we are happy to assist you by phone.

Condition: as good as new (ex-display), Year of construction: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. Temperature control chambers: width 600 mm x height 1000 mm Temperature control chamber for the AllroundLine Cooling using LN2 (liquid nitrogen) (-80°C external connection, not included) Voltage: 400/230 16A 3N〜50/60Hz Power: 4500W Weight: 180 kg Bdedpfolguwwox Ab Tjk Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Bdodpfx Aek Hz Nqob Tok Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for rough process pumps Dry vacuum pump ULVAC's unique approach to using latent heat in the pump body allows the LR / HR / UR series, performance even in the most stringent processes. ULVAC has continued its design efforts to maintain extremely uniform high temperature over all pump stages. and this pump family is optimized for CVD and etching applications. Compatible with ULVAC's ECO-SHOCK system for additional energy savings Properties The LR-Series pump is designed for charging valve chambers and PVD processes. ULVAC's unique aluminium design allows for very uniform temperature distribution throughout the pump body: The ULVAC LR-Series pump is designed for applications that require a heated pump, heated gas lines and/or heated exhaust pipes Bdodpjd R U Etefx Ab Tsk Excellent helium pumping capacity Canning motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high level of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when these corrosive gases are exposed. (Series LR) Designed for process gases that produce powdered by-products, such as Si crystal growth furnaces Pre-pump for

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Bdjdpext Hn Sjfx Ab Tok Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), Eliog Here we offer you a chamber air circulation furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06/2 K1051071 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Bedeifkiiepfx Ab Tjdk Further questions we can answer on the phone for you.