Used Crowning Creation for sale (995)

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control DELEM oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request ----- POWER BEND PRO electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning Knedpoz Npz Ejfx Accsc - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Condition: used, Sabatier metal peil production line - for buckets For production of buckets with the following sizes: - Conical bucket with crown lid, capacity 10 l / 12 l / 15 l / 20 l - Conical bucket with a nominal capacity of 10 l / 12 l / 15 l / 20 l with a slip-on lid and a ring closure with a lever clamp Knodpfjz Sp Htsx Accsc The line is in very good working condition, in production, available immediately.

Condition: used, Year of construction: 2013, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10,5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm Ksdpfx Acsz I Dz Aocenc table height 900 mm table width 220 mm oil volume 400 ltr. voltage 380 Volt total power requirement 30.0 kW weight 21300 kg range L-W-H 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Automatic back gauge – flexible 1550 mm Kedpfx Acezc Hpiecsnc CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 250 t, stroke length: 365 mm, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Knjdpfx Ajz Iqmrjccsc Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Technical specifications: Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. Knedpfezc Hvisx Accec They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery Knodpez E U Disfx Accec - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: excellent (used), Year of construction: 2025, operating hours: 60 h, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, The wooden frame painting robot system consists of: KUKA IONTEC KR20R3100 robot with KRC4 controller and 7th axis integration 7th axis linear track with servo drive and robot lifting system Control cabinet with a 15” touchscreen interface Beckhoff Safety system with the option to connect safety light barriers or safety mats Spray control system with 4 proportional valves and solenoid valves Automatic nozzle cleaning unit 8 digital inputs / 8 digital outputs for communication with the conveyor and rotation systems 3. Technical Specifications Parameter Value Working range L = 4,000 mm × H = 2,500 mm 7th axis track length 6,000 mm Maximum robot axis speed 700 mm/s Adjustable painting speed 50–400 mm/s Compressed air requirement 8 bar (1,250 l/min) Power supply ~3 × 400 V, 50 Hz Scanner resolution 7 mm × 7 mm Installed power 15 kW Maximum tool weight 20 kg 4. Frame Recognition and Scanning System The scanning system consists of: Industrial scanner Encoder Dedicated software with an automatic program generator The system detects: Object shape Position relative to the traverse Contours Based on scanning data and operator-defined parameters, the software automatically generates the optimal painting program for the robot. Ksdpozl Sbzofx Accsnc 5. Flexible Recipe System Surface coating quality depends on adjustable, operator-defined parameters. The system allows the creation of unlimited product recipes depending on: Product type Product size Frame configuration (frame, sash, panel) Profile type Large and small format frames Separate parameter sets ensure optimal paint coverage for each product type. Adjustable Parameters: Robot painting speed Spray gun angle relative to the product Spray gun distance from the product Spray start and stop delay Paint reduction at intersections and corners Product thickness Spray penetration depth for internal surfaces Air flow regulation Paint pressure control 6. Painting Process Sequence 1. External surface coating 2. Internal surface coating 3. Final facade finishing layer This sequence ensures complete and uniform coverage of all surfaces. 7. Supported Products The software can automatically generate painting programs for: Standard rectangular European windows (without additional trims), where the internal opening painting surface ≥ 350 mm Flat-surface Closed door frames mounted on a traverse (no open ends)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system Knedpfx Acsrx Rxpscec - Automation at the output Connection for slant conveyor and sorting table

Year of construction: 1994, condition: used, Crowning for press brake, bending bench, die holder with displacement device Kodpfxsrdil Ae Accsnc -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

Condition: good (used), Perfecta 168 TS paper guillotine The machine is in very good condition and ready for production. Year of manufacture: 2010. Available immediately from stock. The guillotine can be used as a standalone unit or integrated into cutting systems. Program creation is handled via the menu and covers a wide range of cutting tasks, such as single cuts, custom programming, multiple cuts, clamping without cutting, and automatic transfer of actual values. Perfecta premium-class paper cutters are manufactured in Bautzen, Germany. Distinguishing features of Perfecta machines: – Interactive user interface Knedpfxjz S Uy Ej Accec – 18.4” touchscreen – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via an electronic handwheel – Optimized cutting cycle – Programmable clamp pressure – Automatic adjustment of clamp pressure based on cutting width – Automated front-access knife change – Quick-change knife system – New, single-piece cast machine frame for increased stability – Maintenance-free electromagnetic clutch Technical specifications: Cutting length: 1680 mm Maximum pile height: 165 mm Insertion depth: 1680 mm Minimum cut with false clamp plate: 77 mm Minimum cut without false clamp plate: 26 mm Maximum backgauge speed: 300 mm/s Backgauge guidance: above the work table Main motor power: 7.5 kW Net weight: 6900 kg The machine comes equipped with a spare knife, a paper jogger, a false clamp plate, documentation, and a set of tools.

Condition: excellent (used), Year of construction: 2022, operating hours: 883 h, functionality: fully functional, 8 Channel JuanaRoll machine - Automatic Pre-roll machine Manufactured in 2022, in excellent condition, very few working hours - only 883 working hours in total Machine capable of producing up to 4,000 Pre-rolls per hour while having the highest accuracy in the industry Very flexible - capable of running multiple strains at the same time. You can dedicate specific lanes to specific sizes without having to change cone blocks. Cone presentation possible: Twisted & Trimmed / Twisted / Crown - Cone processing machine for opening, filling,weighing, compressing and twisting of cones - Equipped with servo-controlled conveyor with cone blocks for station-to-station processing - Vision System per channel for checking for correctly opened cones before filling - Weighing systems with individual weigh cells per channel for accurate dosing - Vibratory feeders and stainless steel canisters per channel for product supply - Funnel and compactor assemblies with adjustable compaction sequences via HMI - Tamping station for even compaction of the product - Twister unit for automatic closing of cones (optionally with trimmer system) - Central HMI control with recipe management, alarm notifications and maintenance functions - Electrical connection: 230 Vac, 60 Hz, 1 phase, 20 Amps - Pneumatic connection: 90 PSI (6.2 bar) dry air - Air consumption: approx. 15 CFM (7.1 L/s) - Machine weight: approx. 1,800 kg - Dimensions (L x W x H): approx. 362 x 131 x 235 cm - Machine is designed for industrial production environments Knjdeyzuhxepfx Accec - Comes with operator's manual

Condition: used, Year of construction: 1984, Technical details: Kodpfx Aju Ib D Esccjnc pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, total length: 3,750 mm, total width: 1,900 mm, total height: 2,900 mm, Year of manufacture: 2019 Colour: Cream Weight: 12.620 kg Price: On request Machine-errors. Can't refer axes. To be repaired. - Details: - └ Description: Machine errors. Cannot reference axes. Needs repair. Knjdpfx Acjzzb I Ascjc - Year: 2019 - CE marking present: Yes - Serial number: 73431915241 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 22.0 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Max. stroke [mm]: 265 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard, Angle measuring system - Transport dimensions: 3750mm x 1900mm x 2900mm (l x w x h) - Transport weight [kg]: 12620kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Unwinding reel for coil material DREHER - DIMECO, Type 2370 BF Model 653, Year of manufacture 1979 Coil weight, max. 2000 kg Coil width, max. 320 mm Coil width with guide arms, max. 320 mm Coil width without guide arms, max. 480 mm Coil inner diameter 340-540 mm Reel shaft, support shaft, Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square shaft 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank Kjdpjz R D Snofx Acconc - 6 pcs. coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Knjdszt R D Depfx Accsc Equipment: - CNC control system Cybelec VisiTouch (retrofit 2026) - 2 pcs. support arms - Foot switch - Side protective doors - Laser safety device - Tool holder EHT - Pneumatic die shifting - Crowning - Controlled axes: y1, y2, x, R

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength Kodpfx Acsz Rmcvecjnc - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2008, Cap removal machine for removing crown caps from returning empty crates. Additional title: Removal of crown caps from empty glass bottles Capacity filling line: 44000 bo/h capacity at the filler Power: 6 kVA Current: 16 A Voltage: 230 / 400 V Frequency: 50 Hz Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates Material: Housing from stainless steel Knedpfxezwcz Ae Accoc Position: in a floor-standing cabinet on legs Features: Uncorking heads, drives; crate conveyors; cap collection trays; protective housing with doors; control cabinet with control elements

Condition: used, Year of construction: 2023, pressure 320 t chamfer lenght 6050 mm distance between columns 5100 mm stroke 350 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 22.500 kg dimensions of the machine ca. 7000x2300x3200 mm Knjdpezvq Eaefx Accec The machine is in like-new condition Accessories/Features: - ESA S 875 PC control system - 4 height-adjustable support arms in front of the machine - 2 manually adjustable stop fingers - Light barrier in front of the machine - Foot switch - Crowning - Side safety doors - Controlled axes: y1, y2, x, R, z1, z2 - 1 set of upper and lower tools - Machine in like-new condition

Condition: used, mileage: 78,117 km, power: 210 kW (285.52 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 76,500 mm, total width: 25,500 mm, total height: 37,200 mm, loading space length: 50,800 mm, loading space width: 24,600 mm, loading space height: 20,100 mm, Year of construction: 2007, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at [phone number]). Mercedes-Benz Axor 1829 A, flatbed with tarpaulin A70: Differential lock, front axle AL3: Front axle, 7.5 t AM3: Rear axle, H7 13.0 t, crown wheel 300 AR1: Axle ratio i = 5.333 (HL7) B02: Anti-lock braking system (ABS) B43: Trailer brake, 2-line B65: Air dryer, heated BB6: Drum brake on front and rear axles BB9: Pipe rupture protection for braking system C42: Stabilizer, rear axle, mounted under the frame C63: Bumper, steel version C95: Rear underrun protection removed (EC) CL9: Steering, LS 6/LS 8 CR4: Fastening parts on the frame/hole grid CR5: Frame head reinforced, for special modifications CU0: Underrun protection, foldable, rear (Meiller) D15: Roof hatch, swiveling D17: Turntable E10: Blackout lighting system E84: Battery box, lockable EC6: Trailer socket, 15-pin EM8: PSM, body and trailer CAN, ISO 11992 ES8: Auxiliary socket 24 V/15 A, cab front panel EW2: Pre-installation for toll collection system removed F20: S-cab, extended by 180 mm FE5: Power windows, driver and passenger door FL3: Cab mounting, reinforced at the rear FL6: Cab mounting, standard FN1: Dashboard FQ7: Storage compartment above the windshield, 2 compartments FS9: Exterior mirrors, electric, driver's side FW2: Anti-theft system (transponder) removed FX7: Front mirror, aerodynamic, front GS3: Gear shifting, hydraulic GT1: Gearbox G 131-9/14.57-1.0 GV3: Transfer gearbox VG1400 3W H03: Air conditioning H04: Additional thermal insulation HF2: Pollen filter HH1: Auxiliary hot water heater, Eberspächer D5W S I40: Tires 14.00 R 20, front axle/non-driven axle I41: Tires 14.00 R 20, rear axle IA1: Wheel arrangement 4x4 IB6: Model series SKN-R IC1: Flatbed chassis ID1: Leaf suspension IL1: Domestic (Germany) IQ8: Wheelbase 4200 mm IV0: 18.0-ton truck IX5: Inline engine, 6 cylinders JD3: Tachograph, digital, EC, rev counter + additional recording, ADR JK3: Instrument cluster, graphic display, fuel economy meter JZ3: Tachograph manufacturer CONTINENTAL K40: Fuel tank lock K45: Strainer, fuel filler neck K81: Fuel pre-filter, heated water separator KAL3: Front axle, 7.5 t KB56: Front coupling head for replenishing air KBCA: Air reservoir and air dryer, offset in the frame KCR4: Fastening parts on the frame or hole grid KCU0: Underrun protection, foldable, rear (Meiller) KCUM: Rear overhang modification 1650 mm KCYF: Flagpole holder KCYL: Grounding screw according to customer requirements KCYQ: Towing eyes front and rear, screwable at the front (not according to STANAG) KCYS: Bumper painting KD15: Round, swiveling roof hatch KD17: Turntable base (without turntable) KD6: Exhaust gas monitoring for nitrogen oxides (NOx) KE10: Blackout lighting system (STANAG 4381) KE8: On-board diagnostics 1.0 with NOx control KEAM: Single-pole battery main switch NATO KECM: Trailer socket 12-pin VG 96 923 KECN: Trailer socket 7-pin VG 95 234 KECZ: Battery charging socket KESM: External start / power socket 2-pole (STANAG) KF20: S-cab extended by 180 mm KFKV: Cab tilting pump relocated KFML: 2 rifle holders for model "G36" KFMP: Cab mounting package for BWFPS KFMY: 1 additional rifle holder KH8: Exhaust muffler, end pipe downwards KH9: Exhaust system, relocated to the rear KHH1: Auxiliary hot water heater, Ebersbächer D5W S Knjdez Si T Ijpfx Accjc KJWB: Deactivation of the warning signal in the display on the tachograph KJWC: Deactivation of the warning signal in the display on the NOx sensor KK81: Fuel pre-filter,

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers Kodpex Npiyjfx Accenc • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Ksdpjzut Sysfx Acconc Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Battery: 24 V / 775 Ah - Hoppecke Options: Fully equipped - Mast: Triplex FFL - Equipped with side guides & sensors (INCLUDING side rollers/wheels & sensors!!)

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor Kjdpfewmk Ewsx Acconc CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: used, total length: 40 mm, total width: 2,800 mm, total height: 2,690 mm, Year of manufacture: 2002 Kodpfx Ajz Dh S Djccenc Colour: White Weight: 11.490 kg Price: On request - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 7061992647 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 200 - Max. working width [mm]: 3000 - Column gap [mm]: 2300 - Throat depth [mm]: 700 - Backgauge depth [mm]: 700 - Crowning system: None - Tools included: Yes - Options: Digital readout - Transport dimensions: 40mm x 2800mm x 2690mm (l x w x h) - Transport weight [kg]: 11490kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2023, pressing force: 224 t, total width: 1,770 mm, total height: 3,000 mm, overall weight: 14,750 kg, product length (max.): 5,250 mm, number of axes: 3, This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15" touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details. Knodpfx Aoz D Dhneccec - Pressing Force: 220 metric tons- Distance Between Columns: 3600 mm- Bending Stroke: 265 mm- Installation Height: 530 mm- Side Column Overhang: 450 mm- Controlled Axes: 3 axes (Y1, Y2, X)- CNC Control Unit: DT-15 CNC CONTROL (15" 2D graphic display, touchscreen, USB ports, PC software, graphical product/tool memory)- Backgauge Drive System: Servo-motor-driven backgauge on linear guides and ball screws- Backgauge Finger Blocks: Double linear guides- Backgauge X-axis Speed: 500 mm/s- Backgauge R-axis Speed: 350 mm/s- Backgauge R-axis Travel: 250 mm- Axis Position Accuracy: 0.01 mm- Y-axis Rapid Traverse: 160 mm/s- Y-axis Working Speed: 10 mm/s- Y-axis Retraction Speed: 140 mm/s- Hydraulic Drive System: Yes- Main Motor Power: 22 kW- Operating Voltage: 400 V- Control Voltage: 24 V- Main Fuse Current / Rated Current: 100 A- Frequency: 50 Hz- Short Circuit Breaking Capacity: 10 kA- Oil Tank Capacity: 250 L- Table Height: 900 mm- Table Width: 104 mm- Safety System: Fiessler AKAS laser safety device mounted on the upper beam- Crowning: CNC-controlled crowning- Upper Tooling: Upper die 1010/A/75°, split and offset- Lower Tooling: 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)- Support Arms: Sheet metal support arms on linear guides- Compliance: CE compliant Technical Specification Bending Length 4050 mm