Used Cross Cut Destacker for sale (22,494)

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base Nodpfx Aswwaz Aofrsdd - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm - complete with saw dust filter Nsdpfx Asu Dhupefrjdd

Condition: excellent (used), functionality: fully functional, Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Ndedpfxjxf Hcms Afrsd Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length Ndedpfxebidg Eo Afrsd 23 m/min. at 400 mm plate length

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Nsdpfx Aeudwzcjfrodd Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: used, functionality: fully functional, Cross-through cut-off saw, Bäuerle brand, new electrics with impulse transmitter automation. Triple cut, adjustable, length up to 6.30 m. Price 3000 EUR ex works. Ndedpfjxd Tdujx Afrsd

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model GOT2000 Ndjdpow Uaigofx Afrod Additional Equipment Full optimization of 30 dimensions in two quality grades Cutting programs for different customers Cutting at marks made with fluorescent chalk Trimming of margins (beginning and end of the input material) Cutting in bundles (several pieces at once) Counters for meters, total, shifts, operator, monthly Cutting accuracy ±0.2 mm This METAL TECHNIKA OWD-1600 was manufactured in 2018. It features a GOT3000 Mitsubishi controller and excels in full optimization of 30 dimensions across two quality grades. It supports various cutting programs and can handle input material widths from 12 to 250 mm and heights up to 120 mm. Central oil lubrication ensures smooth operation. Consider the opportunity to buy this METAL TECHNIKA OWD-1600 Optimizing Cross-Cut Saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: used, Double rip saw IDL000811 - max width: 2500 mm - electric cabinet - manufacturer: Tegle/norway Ndsdpfx Afeu At Tberod

Condition: excellent (used), functionality: fully functional, saw blade diameter: 420 mm, Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Nsdpsxdtlfefx Afrodd Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg

Year of construction: 1991, condition: good (used), design: rotary shear Nedpjgnyy Tofx Afrjdd strip width: 500 - 1.650 mm strip thickness 0,3 - 2 mm

Condition: excellent (used), IM Very good condition. Ndodpfxoxclluj Afrsd

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Weinig Dimter OptiCut 200 Elite: Njdpfx Asw Dh Rrjfrodd Year of manufacture: 2004 Technical details: - Maximum cutting length: up to 6.3 meters - Maximum cutting width: 300 mm - Maximum cutting thickness: 100 mm - Number of ejectors: 3 units Feeding speed: Adjustable, from 10 to 250 meters per minute Control system: PLC with user interface, display, and optimization software Sensors: Equipped with various sensors for defect detection and cutting optimization Additional features: Automatic detection of defects and markers Integrated waste management system Possibility of integration with other production systems Machine characteristics: Precision: High cutting accuracy thanks to advanced optimization algorithms Performance: The machine is capable of quickly processing large volumes of wood, increasing production efficiency Safety: Equipped with various safety features, such as protective covers and emergency stop systems Flexibility: Adaptable to different types and dimensions of wood, making it a versatile tool for various applications in the woodworking industry Installation, commissioning, and operator training are available at an additional cost.

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Ndjdpfxsq Ny Efs Afred Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Technical specifications: tba saw blade ø: 500 mm Nodpfx Afew Nitqjrjdd input length: 400 - 6300 mm input thickness: 12 – 80 mm feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Control: OptiCom Pro Construction year: 2022

Condition: new, Year of construction: 2024, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Scanning speed - 80m/min Scanning device - Infrared sensor of the German brand SICK Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Ndjdpfstvmv Rjx Afrsd Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit Nodpsdzp T Defx Afrjdd - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Nsdjw Htm Repfx Afrsdd Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 Nedpfjw Tc Hrsx Afrodd - precise cutting from the program, - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size.

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Nsdpfeqpdkcjx Afrjdd

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. cutting height: Max. 120 mm cutting width: max. 700 mm input length: max. 5,300 mm Ndodpfx Afsw Nhgperjd

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Nedpfx Ajhw Ng Ijfrjdd Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2301.14, Sawn timber length cross cut line, timber width 20 - 300 mm, height 10 -100 mm Njdpfxjw Rr Dbo Afrsdd

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Ndsdpfxsu Atmue Afrjd Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Nodpfsw Nbhmsx Afrsdd Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Ndedpfx Afow I Dpqjred