Used Cross Cut Destacker for sale (18,275)

Condition: used, Year of construction: 2013, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Machine is currently not working, possible problem with software Gujdpfeyvf Epex Ak Uog - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4919 - Min. saw blade diameter[mm]: 440 - Max. saw blade diameter [mm]: 450 - Input table length [mm]: 4700 - Output table length [mm]: 2000 - Options: Automatic pusher system - Feed speed: Automatic - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 20 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: Gsdpfx Akszp H R Ej Ujug The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total width: 1,500 mm, total length: 11,300 mm, total height: 1,800 mm, cutting width (max.): 350 mm, saw blade diameter: 550 mm, roll width: 430 mm, spindle diameter: 35 mm, cutting length (max.): 5,300 mm, hole diameter of the disc: 35 mm, CEMIL TR550 semi-automatic cross-cut saw Specification: • condition - used, ready to work • manufacturer - CEMIL • model - TR550 • max working width - 350 mm • max working height - 130 mm • maximum cutting length - 530 cm • blade diameter 550 mm • blade mounting spindle - 35 mm • blade speed - 3080 rpm • right, receiving table 505 cm long • left table 600 cm long • tables and feed 43 cm wide • adjustable cutting speed • adjustable pusher speed • possibility of working in automatic and manual cycle • in the machine, possibility of setting, among others length and number of cut elements, board length, waste length • extraction nozzle - fi 140 mm • weight approx. 280 kg • instructions in Italian, control partially translated into Polish • overall dimensions after unfolding - 11,300 cm x 150 x 180 cm (length x width x height) Gjdpfx Akewa Dhlj Uoug • body dimensions - 110 x 150 x 180 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Guedpfjx Au A Nsx Ak Usg Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included Godekt I Uyjpfx Ak Usug - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Godpfx Aozryvaek Ueug - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA Gsdpfxszrnt Ho Ak Ujug - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, maximum distance between units: 3.3 m two motors, 2.2 kW each blade tilt adjustable cutting angle in the range of -45/+45 degrees maximum blade diameter: 330 mm pneumatic clamping devices blade speed: 3765 rpm CE marking Godpfxjzxpr Dj Ak Ujug

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). Gjdpsv Nktbjfx Ak Usug The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design!

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake Gjdefhbuyepfx Ak Uoug - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Colour: Grey Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gusdpfswniuaex Ak Ueg Yorick Diebels

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm Gsdpfx Aozryuvsk Usug

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system Guedpfx Akoywdx So Usg - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: excellent (used), Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: OWD/381/2020, feed length X-axis: 5,200 mm, I have an Optymalizerka OWD-1600 Metal-technika machine for sale. It is a very good machine manufactured by a Polish company. The arm movement is driven by a servo motor, enabling very fast and precise cutting. The machine control is based on a Mitsubishi controller (one of the best in the world for machine control solutions). Year of manufacture: 2022. The machine was used as a backup, operating on average for half a shift per day. The machine is connected and ready for testing. Interested parties are welcome to come and see it. I can record videos or send more photos. Price is net. KEY FEATURES Godpfx Aozhltvjk Usug SPECIFICATIONS Electronics: Controller with a color touchscreen display "MITSUBISHI" Functions: - Full optimization of 30 dimensions in two quality classes. - Creation of cutting programs for different clients. - Cutting at a point marked with a fluorescent pencil. - Trimming the margin (beginning and end of the input material). - Cutting in batches (several elements at once). - Counters: meters, total, shift, operator, monthly. - Cutting accuracy: ±0.2 mm. - Ability to handle material up to 5.2 m in length. - Table with ejectors. Motor: 7.5 KW (saw Ø500 – 140 teeth) Input material width: 12 - 250 mm max. width/height (250 / 50 mm) Input material height: 20 - 120 mm max. height/width (140 / 120 mm) Input material length: up to 5,200 mm Lubrication: Oil-based central lubrication system Automation at the output: Connection for an inclined conveyor and sorting table.

Condition: used, total height: 1,550 mm, total length: 7,900 mm, total width: 2,350 mm, Weight: 1.500 kg - Documentation available: No - CE certificate present: No - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 Gjdpfxexixh Ao Ak Ueug - Input table length [mm]: 6000 - Options: Automatic pusher system - Transport dimensions: 7900mm x 2350mm x 1550mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Price: 9300€ Gusdpfx Aksztc Dcj Uog The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 Gedpfx Asv Diy Aek Usug DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Guedskv Untepfx Ak Uog Saw 7.5 kW Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day

Condition: like new (used), Year of construction: 2014, functionality: fully functional, maximum blade diameter: 350 mm Gsdpfx Aezmwl Usk Ujug minimum blade diameter: 340 mm two motors, 3 kW each 400 V year of manufacture: 2014 left unit fixed, right unit movable pneumatic clamping system maximum distance between blades: 2800 mm minimum distance between blades: 600 mm weight: approximately 800 kg

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No Gsdsyf H H Hspfx Ak Usug - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm Gedpfxefv Hphj Ak Ueug ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Workpiece dimensions at 45° Height: 80 mm or 90 mm Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Saw blade diameter: 300 mm Godpfx Akey Sinzo Ueug Motor speed: 3000 rpm Space requirement: 3830 x 1100 x 1600 mm

Condition: good (used), Year of construction: 2005, OPTIMIZATION CROSS CUT LINE STROMAB TR350 MATRIX 4-7000 Loading chains for automatic loading. 8 chains, lenght 1.500 mm Loading pusher 7.000 mm 4 optimization criteria Automatic knot removal, fluorescent chalk marking Cutting head. Diameter: 350 mm. 4 HP Cutting section capacity: 150 mm x 80 mm,...., 210 mm x 30 mm Classifier unloader with 2 fast pneumatic ejectors. Conveyor with variable speed Guodpfx Akezcy Ncj Ueg Year 2005 CE

Condition: like new (used), Year of construction: 2025, functionality: fully functional, COST-CUTTING OPTIMIZING SAW The Supercut 500 is a high-speed optimizing saw designed to deliver maximum production capacity with outstanding reliability. EXTREMELY ROBUST The machine features a highly robust, reinforced steel frame. The infeed belt conveyor is synchronized and driven by the same motor as the feed rollers. An exclusive system ensures solid double-sided top and bottom traction. The upper feed system includes three hardened, toothed drive rollers and six idle pressure wheels (in three pairs). Each toothed roller's rise and descent are managed by numerical control. TECHNOLOGICALLY INNOVATIVE The electronic system integrates a computer directly connected in real time to a next-generation CNC (numerical control unit). The TROPTIM software runs on Windows and offers full management of up to five wood grades. Equipped with a 22” color LED display, remote internet teleservice, and integrated Excel macros. FAST An innovative cutting system achieves such high speed that the blade is almost invisible during operation. Rapid, comprehensive optimization with a compact overall footprint. Feed system equipped with an 18 Nm brushless servo motor. Cutting system uses a 28 Nm brushless servo motor. Saw blade power: 7.5 HP (5.5 kW). Eight idle rollers positioned under the belt of the infeed conveyor. CUTTING DIMENSIONS Cutting section: min. 30x15 mm, max. 220x60 mm. Minimum workpiece length before cutting: 500 mm, maximum: 5000 mm (up to 6000 mm with optional support rollers). Capability for a single cut in the last 190 mm of the board. Suitable for boards of regular profile with a maximum thickness variation of 8 mm. Maximum timber weight: 50 kg. Gsdpfx Aksy Iz Hns Uoug

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke Gusdpfx Aeztzc Dsk Ueg – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)