Used Cross Carriage for sale (9,461)

Condition: excellent (used), Stainless steel version, Isdpfx Afjhvyzwjisih Length: 1400mm Width: 1200mm Height: 1900mm Weight: about 250kg

Condition: used, Year of construction: 2013, SECOND-HAND CROSS-CUTTING VENEER PACK GUILLOTINE CASATI MOD. TO/CC1450 - Cutting lenght mm. 1450 Iijdov Tczljpfx Afijh - Pressor stroke mm. 100 - Max. rear feed width mm. 600 - Min. rear feed width mm. 25 - Hydraulic unit motor power kw 3 - Rear feed motor power kw 0,37 - Year 2013

Condition: good (used), Line for re stacking , trimming and cross cutting boards and planks in lengthes. Consist of below main parts: - Side conveyor for packages - Tilthoist - De-sticking - Cross-cut saw for cutting in selected lengthes - Side conveyor to stacker - Lumber stacker - Lifting table Ijdjqcvfuspfx Afioih - Side conveyor for ready made packages. Please notice that we can offer automatic stacker/packing unit separately to install.

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model GOT2000 Additional Equipment Full optimization of 30 dimensions in two quality grades Cutting programs for different customers Cutting at marks made with fluorescent chalk Trimming of margins (beginning and end of the input material) Cutting in bundles (several pieces at once) Counters for meters, total, shifts, operator, monthly Cutting accuracy ±0.2 mm This METAL TECHNIKA OWD-1600 was manufactured in 2018. It features a GOT3000 Mitsubishi controller and excels in full optimization of 30 dimensions across two quality grades. It supports various cutting programs and can handle input material widths from 12 to 250 mm and heights up to 120 mm. Central oil lubrication ensures smooth operation. Consider the opportunity to buy this METAL TECHNIKA OWD-1600 Optimizing Cross-Cut Saw. Contact us for more information about this machine. Application Types Sawing (Wood) Ijdpew Uaigsfx Afieih

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Double saw set at a 45-degree angle Iedpfx Afsw T Rpzoioih Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Extended table on the right side

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 4421.24, feed rate X-axis: 60 m/min, space requirement height: 1,950 mm, space requirement length: 16,300 mm, space requirement width: 2,700 mm, TECHNICAL DETAILS Automatic feed: up to 60 m/min MACHINE DETAILS Serial number: 4421.24 Year of manufacture: 2009 Three-phase current: 400 V / 50 Hz Control voltage: 24 VAC / 230 VDC Power: 20 kW Rated current: 40 A Protection: 50 A Machine dimensions (LxWxH): 2,000 x 1,400 x 1,650 mm Infeed table dimensions (LxWxH): 7,450 x 2,100 x 1,100 mm Outfeed table dimensions (LxWxH): 4,900 x 2,400 x 1,400 mm Ijdpfx Asw Tzh Usfieih Overall system dimensions (LxWxH): 16,300 x 2,700 x 1,950 mm FEATURES - Automatic feed

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Weinig Dimter OptiCut 200 Elite: Year of manufacture: 2004 Technical details: - Maximum cutting length: up to 6.3 meters - Maximum cutting width: 300 mm - Maximum cutting thickness: 100 mm - Number of ejectors: 3 units Feeding speed: Adjustable, from 10 to 250 meters per minute Control system: PLC with user interface, display, and optimization software Iisdow Dh Rropfx Afish Sensors: Equipped with various sensors for defect detection and cutting optimization Additional features: Automatic detection of defects and markers Integrated waste management system Possibility of integration with other production systems Machine characteristics: Precision: High cutting accuracy thanks to advanced optimization algorithms Performance: The machine is capable of quickly processing large volumes of wood, increasing production efficiency Safety: Equipped with various safety features, such as protective covers and emergency stop systems Flexibility: Adaptable to different types and dimensions of wood, making it a versatile tool for various applications in the woodworking industry Installation, commissioning, and operator training are available at an additional cost.

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Mounting holes 4 Iiedpfjw S I Rmsx Afioh Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1998, functionality: fully functional, Used, complete, fully functional block wagon ARTIGLIO CI700 with 6 hydraulic clamps including drive unit. The wagon can be inspected at any time by prior appointment. Iiodpfx Afjxbpc Ijioh

Year of construction: 2009, condition: good (used), Longitudinal carriage, chassis, welding chassis, longitudinal carriage, welding machine, welding carriage, inert gas welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner, welding tractor -Stable, compact and modular design -4-wheel drive via stepper motor -Wheels with polyurethane treads -Excellent directional stability -Viscous dampers for constant driving operation -Integrated position measuring system -Reinforcement frame with mounting pin for wire feed -4 pieces of transport eyelets -Power supply and PLC power unit integrated in the chassis -Power cable with plug: 12 m -Control cable to power source: 10 m Iiedpfxew Sw N So Afish -incl. hose package

Condition: good (used), Year of construction: 2013, functionality: fully functional, feed length X-axis: 6,200 mm, saw blade diameter: 550 mm, cutting width (max.): 600 mm, power: 15 kW (20.39 HP), overall weight: 1,000 kg, Shortening saw UKS 700 OPTIM for transverse shortening of wood and wooden materials We offer 2 machines = variant (left or right side operate) >>Price is for 1 set(pcs) Present as dismounted from automatic line already The optimization shortening saw can be used in various branches of the wood industry: • sawmill production of semi-finished products • shortening prisms, packets, plates, prisms • production of slats for the production of glued prisms Iodpetpukhsfx Afioih • production of massive furniture parts • automatic shortening of boards and planks in the production of construction carpentry products

Condition: like new (used), functionality: fully functional, Year of construction: 2022, On behalf of our client, we offer: as-new precision crosscut machine GMT 6000 / 370 with base and coolant system. New price: €15,000. Now for sale to the highest bidder. Iedpfx Aexayxqsfijih

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Iisdjq Ny Efepfx Afijh Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: used, overall weight: 1,080 kg, total length: 800 mm, total width: 800 mm, total height: 1,260 mm, Cross tooling column with grid Mounting holes 16 Iedow S It Ujpfx Afioih Pitch fixing holes 160 mm Length 800 mm Width 800 mm Height 1260 mm Weight 1080 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Ijdpfetgkwfsx Afisih Pneumatic

Condition: used, Year of construction: 1994, For processing blank paper or with print mark reader (automatic register control) Maximum unwind diameter: 1,500 mm Core diameter: 70 mm / 152 mm Maximum cutting speed: 250 m/min (with 80 g/m² paper) Formats: A3, A4 Maximum web width: 500 mm Isdpew R Uqdsfx Afisih Minimum web width: 250 mm Paper grammages: 60 g/m² - 170 g/m² Maximum delivery belt stacking height: 100 mm Control system: Siemens Simatic S5 Technical specifications as per user (without guarantee)

Condition: new, Year of construction: 2024, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Scanning speed - 80m/min Iedpfotvmv Rsx Afioih Scanning device - Infrared sensor of the German brand SICK Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Iisdpfx Afjw Nxyyeieh KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: excellent (used), Spindle speed: 3,000 rpm Max. workpiece length: 500 mm Cut-off wheel: Ø 180 x 1 mm Iedpfxow Hbqwj Afisih Cup wheel: Ø 100 x 20 mm Dimensions: approx. 430 x 360 x 500 mm Weight: 90 kg

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Technical specifications: tba saw blade ø: 500 mm input length: 400 - 6300 mm input thickness: 12 – 80 mm feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Ijdpfew Nitqsx Afioih Control: OptiCom Pro Construction year: 2022

Condition: ready for operation (used), Year of construction: 1998, Crossfeed Veneer Splicing Machine / Veneer Composer in Crossfeed Operation Manufacturer: Fisher Rückle Model: Delta FZX 28 Delta + RVP / BS completely equipped with: - Intermediate conveyor - Edge reinforcement and trimming unit - Stacking device with lifting table Maximum veneer strip length: 2800 mm Ijdjw Tlktjpfx Afioih Veneer strip thickness: approx. 0.4 – 1.5 mm (depending on veneer type) Veneer strip width: approx. 70 – 600 mm (crosswise to the grain direction) Adhesive types: urea-based or PVAC-based This machine enables you to join veneer sheets crosswise using glue (PVAC or urea). It is necessary that the veneer sheets are pre-glued. The machine guarantees excellent joints of any type of veneer. Gluing is performed by a system of hydraulic cylinders applying horizontal pressure, which ensures tight, gap-free joins along the entire length. The machine’s heavy-duty, robust design guarantees longevity and reliable operation. Operation is simple and intuitive thanks to a clearly laid out control panel. Separate manometers provide the operator with direct access to the pressures for the heating plates, the horizontal pressing system, etc., allowing for quick changeover times. The machine’s upper traverse can be raised to allow easy and rapid access to the heating plates for cleaning and maintenance.

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Iiodpfx Aew I Uv Uofish Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Isdpfx Ajhw Ng Ijfijih Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size. Iodow Tc Hrspfx Afisih

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. cutting height: Max. 120 mm cutting width: max. 700 mm Iodjw Nhgpepfx Afieih input length: max. 5,300 mm