Used Copy Shaper for sale (637)

Condition: used, x-280 ,y- 200 , Z 315 , Tischabmessungen 380x380/250x500 Blsdpfx Aoddxb Nedrji Sehr viele Schriftsaetze,wesentlich mehr als abgebildet

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes. Blodpfx Aozcz Dnedrsi

Condition: good (used), Code: 0309 Brand: COSMEC Model: KV 1000/C Copying Router Bodpfx Aoylpp Dedrjli Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000

Condition: excellent (used), functionality: fully functional, End tenoning machine Comec FT-CD-CA-680 Number of milling units per side: 1 Automatic material loading from feeder Bledpfx Ajychiksdrsi Template copying operation

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, milling length: 750 mm, milling spindle length: 750 mm, spindle stroke: 150 mm, Equipment: documentation/manual, Wigo 1016 Cross Milling Machine Bedpfx Asxzimtsdrsli Working length: 750 mm Maximum milling height: 150 mm Spindle diameter: 50 mm Spindle motor power: 15 kW Hydraulic pump motor: 3 kW Pneumatic material clamping Foot pedal control Machine dimensions: 1450 x 1600 x 1800h mm

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Minimum length of the processed element 470mm Bledpfx Adsv Tv Ursrei Feed speed regulated by means of a variator Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Condition: used, Technical details: base plate: 210x110 mm weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m copy device for grinding machines for grinding wheel forming ( profile device) Blodpfx Adeu Nuq Iorji details: - adjustment travel upper table longitudinal=60mm (manual) - transverse travel = 20mm - under frame=approx. 60mm ( lockable) - template table size 310x150mm perfect used condition *

Condition: excellent (used), Milling machine, copy router in very good working condition. Bodpfx Asx Rrtdedreli

Condition: ready for operation (used), Year of construction: 2008, The Balestrini CP 100 (manufactured in versions such as CP 100/6 or CP 100/8) is an industrial, multi-spindle wood profiling and copying machine. It is used for precise shaping and copying of curved components. It is typically used in the production of chairs, bent furniture, and door and window frame elements. Technical specifications: Construction: The machine is equipped with several working units (heads) that operate simultaneously based on copying templates. Drives: Main motors with power usually exceeding 2.9 kW (up to 10 HP depending on the configuration), often powered by 380-400V. Working equipment: It features tables with adjustable angles in two planes and a pneumatic clamping system that ensures the stability of the workpiece. Blodpfxozbc Rts Adrei Parameters: The machine allows for milling components with a length often exceeding 2000 mm in larger versions. The weight ranges around 900 kg.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions AS 170/00 Length: 780 mm Depth: 770 mm Bsdsza Iifopfx Adrjli Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Metering spray device

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Max. workpiece width: 180 mm MACHINE DETAILS Main motor power: 4.0 kW Bedpfx Aoy Tnitodreli Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: used, Year of construction: 2008, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Empty weight: 750 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 Blsdoych Elepfx Adrei - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, rotational speed (max.): 12,000 rpm, I am offering my Rotox KF 347 copy milling machine for sale, which is in good condition. It is fully functional and ready for use in your workshop. -Model: Rotox KF 347 -Power: 1.5 kW -12,000 RPM Blsdpsyxy Ncsfx Adroi -Year of manufacture: 2000 -Voltage: 400 volts -Condition: Very good and fully functional The machine is available for demonstration and can be tested at any time.

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Bledpfx Aoib D H Rodrei Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: excellent (used), Year of construction: 2000, FAMOT TNFJ under-spindle milling machine Brand: Famot Model: Tnfj Description: Manufacturer: FAMOT Jvxnva Machine model/type: TNFJ Year of manufacture: 1966 MACHINE IS A COLLECTOR’S ITEM AFTER A COMPLETE OVERHAUL Blodpfx Aoy Twqyjdrji FAMOT MILLING MACHINE AFTER A COMPLETE OVERHAUL, NEW ELECTRICAL SYSTEM, NEW ELECTRICAL INSTALLATION, INTERCHANGEABLE SPINDLE FOR MORSE TAPER MACHINE. OVERALL CONDITION VERY GOOD. NEW MILLING MACHINE GUARD WITH NEW SUPPORT PLATES. THE MACHINE CAN BE USED AS A GRINDER. Year: 2000

Condition: excellent (used), Working length: 90 cm. Engine: 2.2 kW. Bsdey Tm Nlspfx Adreli

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Bledjtqytispfx Adroi Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Condition: good (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders Bedpfx Aett Abxedreli - cooling and lubrication installation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Blodpfxsy S Aa Ds Adrei Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Bjdpjy Sxr Njfx Adrsli Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: excellent (used), Year of construction: 2005, The JAROMA DT-3 copy-turning and milling machine is a professional, cast iron woodworking machine with a copy device, designed for serial production of round, polygonal, and helical components. It uses turning knives or milling cutters (disc/finger) for profile machining based on a template, ensuring high shape repeatability.Main features and specifications:Application: Serial production of parts such as chair legs, balusters, and handles.Construction: Stable cast iron bed.Motor power: 2.2 kW.Dimensions: approx. 225 x 80 x 140 cm.Weight: approx. 300 kg. Blsdpfxjy Sg Dtj Adroi

Condition: used, functionality: fully functional, Lot of 3 copy routers Elumatec KF78/23. 2 units are fully operational (100%). The third is 50% operational, but can easily be refurbished or used for spare parts. Blodpfjyzfl Isx Adrsi Various spare parts included. Horizontal processing area: With stop: 300 x 100 mm With template: 270 x 70 mm Vertical processing area: With stop: 290 x 100 mm With template: 230 x 70 mm 12,000 rpm Clamping range: 150 x 150 mm Supply voltage: 230/400V, 3-phase Price is for the lot of 3 machines, without feed tables.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Bodpfxsyxgzxo Adrjli Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Bjdpfx Aoxz Sknjdrsli Shipping on demand

Condition: ready for operation (used), functionality: fully functional, AUTOMATIC VERTICAL COPY LATHE model GENINI GS 120 second hand 3 spindles + copy automatic movement of carriage feeding speed of carriage is regulable quick reverse of carriage automatic movement of tools unit pneumatic press distance between spindles mm.160 max. length to work 1200 tools motor power Hp 4 volt. 380/50 Bledpfeyl Iufsx Adrei