Used Copy Router for sale (763)

Year of construction: 2017, condition: like new (used), functionality: fully functional, Single-spindle copy milling machine with manual operation and pneumatic locking. Head milling movement via indirect lever. Enables continuous machining without rotating the workpiece and processing of steel up to 2 mm. Scratch-resistant worktable. Manual tracer stylus. Deflection Lever for Head Movement: Manual movement of the tool in the horizontal plane is implemented via a lever to reduce operator effort. The handle height is adjustable for practical and ergonomic usage. Control Joystick: The lever enables vertical travel of the milling unit. The hand lever integrates the motor start button. The milling spindle is equipped with a tool holder featuring an ISO 30 quick-release coupling; four storage slots for tool holders are located on the side of the machine. Stops and Roller Conveyors: Roller conveyors on both right and left sides facilitate the machining of very long profiles. A system of hand-adjustable stops, also fitted on both sides, ensures correct positioning of the workpiece in the machine and brings it into the working area. Lrsdpfx Aeycgvied Neg Stylus with 4 Diameters: The mechanical tracer has four selectable positions, each corresponding to a different tool diameter. It is set onto the pre-chosen template, guaranteeing precise and safe machining. Clamping Devices: The machine is equipped with manually adjustable horizontal pneumatic clamps that ensure secure and correct fixation of the profile on the machine.

Condition: used, Year of construction: 1997, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44 -Spindle speed: 12000 rpm -Stop depths: see photos -Workpiece clamping: pneumatic Ljdpfx Adetvhr Se Nsrg -Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm -Weight: 149 kg with pallet

Condition: used, Year of construction: 1980, for machining aluminium, plastic and steel Milling area 100 x 250 mm Three-phase motor 1 HP 12,000 rpm 380 Volt Location: Nattheim Ljdpfsw Ulcxox Ad Norg

Condition: good (used), Year of construction: 2011, Year: 2011 Ledpott Abxefx Ad Nsrg - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pneumatic material clamping device Lrsdpfx Asxqihied Njg Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Year of construction: 2025, condition: new, Used for lock, handle, hinge and latch slot and channel opening processes with rotating the profile on 3 surfaces of aluminum and plastic profiles. - Copy assembly matching the process - Ability to open various channels independently of the copy assembly with profile gauges - Pneumatic clamps Lredpfxjxmuyco Ad Nog - Independently operating motors - Independent milling process on 3 different surfaces - Cooling system - 8 mm milling cutter - Profile gauge

Condition: used, ROTOX copy milling machine type KF Lrsdpjxgd Euofx Ad Neg

Condition: used, No. 3205 Copy router Reichenbacher RMF Used For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Lsdpfov Hdg Nex Ad Nsrg Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 1984, condition: used, Copy router Rotox Lrjdpfx Aeillyled Nsg Type KF 257

Year of construction: 2008, condition: excellent (used), 1-spindle copy router ALTECH LOGOS Ljdpfx Asqu Ulded Norg

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - BudgeCraft CNC ROUTER - Best Price-Quality CNC - CNC Router: Wood, Plastic & Aluminum Processing - High Precision (0.01mm) Milling - No Annual License Fees Descriptions: The most complete CNC machine for wood, plastic, and aluminum. Fully servo-driven for the most complex operations. Starting at €34,500. - Take advantage of a fixed price for CadCam software and starter kit. - Assembled in the Netherlands according to the strictest CE standards. - Powerful 9KW ATC spindle and speeds up to 50m/min. - Equipped with automatic tool change magazine for up to 16 tools. - From standard milling jobs to complex projects. - BudgeCraft offers the highest precision and lowest purchase price for professionals. Featured Highlights: * No hidden license fees * CadCam Professional - translates; Image BMP, JPG, TIF, GIF, PNG vector files * Formats: Adobe Illustrator, DXF (AutoCAD), EPS, PLT, TXT * 9kW ATC spindle, air-cooled * Ready to use CNC ROUTER: Precision CNC ROUTER Specifications: Review the technical details of our 0.01mm precision machines. Work Area & Options: From 1300x2600 - 1600x3200 - 2100x3200mm. CE Safety: Why our machines are the safest choice for your workshop. Compliant with the New Machine Guidelines 2026. Full technical specifications available on the Danmar Machines Bv website: X-Axis work area : 2600, 3200mm Y-Axis work area : 1300-1600-2100mm Z-Axis stroke : 200mm Gantry construction : Yes, servomotors Spindle motor : 9Kw Servomotor (ATC spindle) Speed : 1,000-24,000 RPM X-Axis travel : 50m/min Y-Axis travel : 50m/min Z-Axis travel : 15m/min Holder : ISO30-ER32-ER40 Software : Pegasus PWoodMilling Vacuum pump : included Lrodpfox Sx Rfsx Ad Neg Contact us for more information.

Condition: good (used), functionality: fully functional, Year of construction: 1997, degree of automation: manual, working width: 4,000 mm, distance between stands: 3,145 mm, overall weight: 10,500 kg, total length: 4,180 mm, total width: 1,600 mm, total height: 2,665 mm, LVD PPT165 COPY 4000 mm 165 T Easy to operate. Not CNC. Transport can be arranged. Lrjdpow Eawyefx Ad Nsg It appears the machine is a copy of LVD. Sold by SH Trading.

Condition: used, machine/vehicle number: 008407, X axis working area: 6700 mm Lrjdpoycdaxsfx Ad Nog Y axis working area: 1520 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 48

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Connection data: 400 V, 50 Hz, 3 Ph, N Ljdpfxjycq Ayo Ad Nsrg Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Lrsdsxlzg Hjpfx Ad Njg Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: ready for operation (used), empty load weight: 1,300 kg, Bouw-/werkverplaatsingen (veelgenoemde waarden): X-as (longitudinaal): ~200–300 mm Y-as (dwars): ~200–400 mm Z-as (verticaal / hoogte): ~127–450 mm Ljdpjycmn Sefx Ad Njrg Tafel / opspanvlak (veel voorkomende afmetingen): ca. 600 × 430 mm of opspanvlak 250 × 700 mm 1.3 kW Speeds: 50-10 000 rpm

Condition: used, Year of construction: 2008, total height: 1,450 mm, total length: 1,750 mm, total width: 1,500 mm, Empty weight: 750 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 Lrsdpfx Aeych Eljd Nog - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008362, X axis working area: 3600 mm Y axis working area: 1600 mm Lsdpex A Tl Asfx Ad Nerg Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 22

Condition: used, Year of construction: 1997, Catalogue number 7724 Lodpfxsya Hl Ee Ad Nerg TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: Ø 150 mm -Height: 20 mm Lsdpfxsb D I D He Ad Njrg -Hole: Ø 30 mm -Quantity: 1 milling cutter -Dimensions: 150/150/H20 mm -Weight: 2.2 kg

Condition: excellent (used), CATALOG NUMBER 7650 Technical Data: - Max working length: 1500mm - Max working diameter: 250mm - Milling (disc milling cutter): 7.5kW - Spindle – 2800rpm 3kW - Spindle speed: 700/1200/1500/2000rpm - Grinding unit: 0.75kW - Hydraulic motor: 3kW - Total power: 17.75kW - Air requirement: 6-8bar - Feeder for blanks up to 150x150mm - Extraction port diameter: 100mm, 160mm - Transport dimensions (L/W/H): 4350x2300x1980mm - Weight: approx. 3000kg ADVANTAGES – German-made Lrsdpswk Hbpefx Ad Neg – Automatic hydraulic copy system – Original DTR documentation – Unpainted – Used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on an exchange rate of 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Lsdpfxex A Hczj Ad Nsrg Total number of tool changer positions: 72

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS are characterized by high rigidity and maximum resolution precision, operating with full interpolation on each axis: X, Y, and Z. Digital Signal Processing (DSP) ensures digital signal processing for smooth machine operation and high machining accuracy. The plotter with a working area of 1220 × 1230 mm provides stable and precise performance. The controller’s built-in memory allows the machine to operate without the need to reload the program each time. The spindle design incorporates high-quality machine bearings, characterized by very quiet operation and increased durability. Training at the CORMAK headquarters is included with every machine. Technical specifications Spindle: 3.7 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 1200 × 1200 × 210 mm Control system: DSP Programming resolution: 0.001 mm Power supply: 400 V Weight: 450 kg Machine dimensions: 2000 × 1800 × 1640 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion (Z-axis – ball screw) Software: UCanCAM V13 software, Polish language version (optional) IMPORTANT! The machine is equipped with a G-code path memory (resume function). In the event of a failure or power outage, it resumes operation from the last point without loss of time or material. CNC Milling Machine CORMAK C1212 PREMIUM (1200 × 1200) Standard equipment Leveling feet Bolts Wrenches Training cutter set ER32 collets – 1/8 inch, 1/2 inch, and 5–6 mm Unloading and positioning of the machine are the customer’s responsibility. The power plug must be provided by the customer due to different socket types (16A / 32A). Optional equipment (net prices) Lredpeycuycefx Ad Nsg UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price

Condition: new, Year of construction: 2026, CNC Milling router for wood C1531 ATC Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3100 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Lodpfxjycuvqj Ad Nerg Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, ATC version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Optional equipment (net prices) UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 Vacuum pump 5.5 kW – PLN 4,900.00 Vacuum pump 7.5 kW – PLN 5,600.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Lrodpoycupwjfx Ad Nog Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. On-site commissioning of CNC routers available upon request, with individual pricing.