Used Copy Setup for sale (1,615)

Condition: used, Year of construction: 1985, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Flott Type: 484001 Year of manufacture: 1985 Machine no.: 31840024 Manual copying device Fixed tailstock Csdpfjz Np Irsx Aiiori Four-jaw chuck Drill chuck mm: 125 Speed stages: 500 - 750 - 1125 - 1700 - 2500 Center distance approx. mm: 1200 Center height approx. mm: 240 Motor kW: 1.5 Space requirement approx. L x W x H mm: 2100x800x1100 Weight approx. kg: 350 Total connection value kW: 1.5 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Year of construction: 1970, condition: used, functionality: unexamined, ZANGS card copying machine for Verdol 1344 / 896 / 448 circuit boards For sale is an original ZANGS card copying machine for Verdol cards or circuit boards. Suitable for: Verdol 1344 circuit boards Verdol 896 circuit boards Verdol 448 circuit boards Year of manufacture: unknown, presumably around 1970 Dimensions: Length: approx. 150 cm Width: approx. 125 cm Height: approx. 160 cm Weight: approx. 900 kg Electrical connection: 400 V three-phase current Motor power approx. 1.5 kW Special feature: The machine has 2 cylinders for reading the patterns. Condition: The machine has been out of operation for several years and has not been tested for functionality recently. It is complete and in good condition. The visual condition can be seen in the photos. Spare parts are available and will be included with the machine. The machine is particularly suitable for weaving mills, textile companies, owners of older Verdol Jacquard machines, and as a spare or backup machine. Inspection possible by appointment. Codpfx Ajzvgfieiisri Due to the weight of approximately 900 kg, only collection or transport by arrangement is possible. Sale in its current condition as shown in the photos.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical Csdpebrptvsfx Aiieri And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg The machine is in perfect working order Crodpfx Aozy Staoiiei We can ship the machine to your address (On demand)

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Codpfjy Sxr Njx Aiisri Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm Credpfozxc Swox Aiiei - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Credpszz Aqlefx Aiiei Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Condition: used, Year of construction: 1988, A twin-spindle copy milling machine is offered for sale. Equipped with pneumatic clamping elements and a copying attachment. Inspection possible by arrangement. Credpfx Aio Aga Hzsioi

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Cedpfx Aisxz Sknsiori Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,100 kg, power: 25 kW (33.99 HP), Industrial copy shaping machine P. BACCI FC2 1600. Manufactured in 2002, weight 2100 kg, power 25 kW. Designed for woodworking (solid wood, furniture components). The machine comes with an Ecosis Soundproof Enclosure (Model CSF) from 2002. Current condition: The machine is dismantled and located in our warehouse. Key Features: Weight: 2100 kg Power: 25 kW Pneumatic vertical clamps Crodpjzi N Awofx Aiiji Control panel with adjustable feed rates Cutter head with interchangeable HM inserts included

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Csdpfx Asyybkwjiiori Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 Cedpe Afnc Esfx Aiisri - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: good (used), Year of construction: 2013, – 2 pneumatic clamps – 12,000 rpm – Mist lubrication system Cedey An U Ijpfx Aiijri – Weight 180 kg – 230V

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Cjdpfx Aiszmyfdeiori Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: fully functional, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed. The machine is partially functional: The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production. The rubber mounts for the slides are brittle and are breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18T) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine will be dismantled in week 46. Csdpjz H H Dqofx Aiisri Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.

Condition: used, Year of construction: 2019, machine/vehicle number: FA76, Used ATLANTA srink wrapping machine - Year 2019Technical Specifications & Performance DataUsed Atlanta type shrink wrapper, manufactured in 2019 and supplied as two units. The equipment is configured for secondary industrial packaging with a current 3x2 pack layout, providing compact film-wrapped bundles for efficient handling, transport and distribution.Quantity: 2 unitsYear of manufacture: 2019Current pack configuration: 3x2Capacity: 40-45 packs/min, ( 2.400 - 2.700 Packs/hours).Installed power: 5.9 kWElectrical supply: 400 V, 50 HzOperating air pressure: 6 barAdvanced Automation & Control SystemsThis shrink wrapper is designed for automated bundle formation and film wrapping within an industrial packaging environment. Its dry-run capability supports testing, setup and verification procedures without product flow, helping operators check the packaging cycle before production operation.The machine uses a 400 V, 50 Hz electrical supply and requires compressed air at 6 bar. These utility requirements should be coordinated with the available site services during installation and recommissioning.Production Line Integration CapabilitiesThe Atlanta type shrink wrapper can be positioned downstream of bottling, labeling or other primary-packaging equipment to create stable multipacks. With its 3x2 layout, it is suited to packaging-line applications where grouped containers require film protection and a practical handling format.In a used bottling line or second hand industrial packaging installation, shrink wrapping equipment typically interfaces with infeed and discharge conveyors. It can support beverage production and other containerized products where bundled packs are required before palletizing, warehousing or distribution.Machine Condition & Maintenance HistoryBoth machines are used and were operational until dismantling. They are reported to be in perfect working order, with no spare-parts replacement required. The equipment was dismantled during the current year and is suitable for professional installation, commissioning and integration into a production line.Operational Performance & VersatilityWith a stated output of 40-45 packs per minute, this shrink wrapper is designed for consistent secondary packaging throughput. The 3x2 pack arrangement provides a defined bundle format for film-wrapped products, supporting orderly downstream handling in industrial packaging operations.Dry-run operation is available, allowing functional checks of the packaging sequence. This feature is useful during installation, line setup and routine operational verification.Installation Requirements & Site PreparationInstallation requires a 400 V, 50 Hz electrical connection, 5.9 kW installed power and compressed air at 6 bar. As the two units have been dismantled, site preparation should include suitable floor space, conveyor alignment, electrical connection and pneumatic supply routing for reliable integration with upstream and downstream packaging machinery.Safety Standards & Compliance CertificationThe shrink wrappers should be installed a... Cedpfxe Aia Eto Aiijri

Condition: used, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Year of manufacture: 2008 Colour: White Empty weight: 750 kg Price: On request - Year: 2008 - CE marking present: Yes - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) Credjych Elopfx Aiisi - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Crodpfx Ajzrx Saoiiei Technical data: - Centre-to-centre distance: 1,300 mm - Centre height: 250 mm - Motor: 1.4 kW

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Copy milling machine URBAN MLA A23 with centering device, year 2005 Condition: very good Cjdpfxewhumhs Aiisri

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Credpfx Aiozrd Tvsiji

Condition: good (used), Copy Milling / Engraving Machine Stock number: 3065 Manufacturer: WMW Union Gera Machine number: 11020 Type / Model: FG 250x500-200 Csdpfxjygcnpe Aiieri Travel distances x-y-z: 280 - 200 - 315 mm Template table / work table: 380 x 380 // 500 x 250 mm Speed range: 2,500 to 20,000 rpm Accessories / Equipment: Font set Power requirement: 0.25 kW Condition: Good Weight: 0.37 t Footprint: 600 x 500 mm Dimensions: 1,100 x 1,000 x 1,300 mm

Condition: like new (used), functionality: fully functional, Xerox Altalink C81xx series, multifunctional color printers. Maintenance contract available! Total print count below 100,000. Multiple machines available in various speed classes! Crsdpfj Aabu Djx Aiisi Available worldwide!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 43 h, machine/vehicle number: PR4-3000-0719-0385, control type: CNC control, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Crsdpj Ahikqofx Aiiji Prices exclude VAT.

Condition: used, Year of construction: 2018, controller manufacturer: Heidenhain, controller model: TNC 620, _____ Description: Year of manuf. : 2018 Control : Heidenhain TNC 620 Speed : 12000 rpm Movement X/Y/Z : 500/450/400 mm Tool holder : SK 40 In General: Year of manufacture:2018 Control system:Heidenhain TNC 620 Travel ranges X/Y/Z:500/450/400 mm Spindle speed:12,000 rpm Tool holder:SK 40 Crjdpfx Aij Ah Ndcoioi Spindle: Technology:Inline direct drive Speed:12,000 rpm Power:13 kW Torque:83 Nm Tool holder:SK 40 NC swivel table: B-axis:+110°/ -5° C-axis:360° Clamping surface:630 x 500 mm Max. table load:200 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:30 Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Position Sensors:Direct scales on all axes Chip Removal:Chip conveyor Coolant Supply:Internal cooling, 12 bar Workpiece Measurement:Renishaw PP40 infrared probe Tool Measurement:Renishaw TS27R tool probe Kinematics measurement:3D quickSET Setup mode:Electronic handwheel

Condition: used, A single-spindle copy milling machine is offered for sale. Equipped with a workpiece support, clamping device and manual operating levers. Inspection possible by arrangement. Codpfxj Aga H Ts Aiisri