Used Copy Setup for sale (1,338)

Condition: used, Leica Reichert Lynx Microscopy Tissue Processor Bedpoxzidfjfx Aknjwn

Condition: good (used), operating hours: 820,000 h, functionality: fully functional, Offer Xerox Primelink C9070 with PS/PCL, output tray and finisher. Device comes from an expired leasing contract and is in good used condition and fully functional. For further information please contact us by mail. Bodpfx Aott Apdjknown

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. Bodpfsbrptvjx Aknjwn • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably

Condition: used, Year of construction: 1995, Used machine Bodpfx Asy Ih S Reknewn Year of manufacture: 1995 Features and technical data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic processes and when changing between various automatic machining tasks. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces mounted on a template past the milling tool. The automatic copying and pressure rollers can be removed within seconds, freeing the machine for custom and special manual jobs. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions (approx.): 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Features and Technical Data: Versatile copy router with extremely short setup times, both when switching from manual to automatic operations and when changing between various automatic processes. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying and pressure rollers can be removed within seconds. This allows the machine to be available for single and custom manual fabrication. Bodjy Ih S Dopfx Aknswn Distance between tool spindle and frame: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Motor power template feed: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable revolver depth stops: 6 Dimensions approx.: 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: Bwjdpfx Aoylyhdsknsn • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: excellent (used), workpiece height (max.): 60 mm, edge thickness (max.): 10 mm, height adjustment type: electric, total length: 7,200 mm, overall weight: 3,500 kg, Equipment: CE marking, OTT edge banding machine, model Twister Jointing / cutting, flush trimming, longitudinal milling, corner copying (AKF), scraper blades R2/R1mm, surface scrapers, cloth disc unit. Spare slot for grooving unit. All spray nozzles, separator, lubricants, cleaning agents. Beckhoff control, each frequency inverter individually driven! Setup within the machine gap. Narrow-part shuttle. Demonstration available by arrangement. Bwsdpfx Aey D Sm Roknjn Machine available immediately. Sale in DACH region with warranty.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Bedpfx Ajx Emf Deknjwn Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Year of construction: 2022, condition: excellent (used), Manufacturer / Model Voorwood L115M (H) with return conveyor Machine Type: Edge Foiling / Profiling / Sanding / Grooving Line with Return Conveyor Overview High-production edge finishing machine capable of profiling, sanding, grooving and applying decorative foil to panel edges and drawer side groove in a single pass. Includes return conveyor system for continuous single-operator workflow. Key Features - Single-pass shaping, sanding, and foil application - Up to ~8,000 lineal feet per shift - Return conveyor system for continuous production - Bottom feed chain with non-marking pads - Digital readouts for fast setup - PLC touchscreen controls - Temperature-controlled foil application with auto disengage Conveyor System - Receiving rollers: 5–100 FPM - Transfer belts: 115 FPM - Return rollers: 90 FPM - Adjustable working height: 29”–40” - Handles material up to 2½” thick - Independent motors for receiving and return Machining Stations Shaping: 5 HP motor, adjustable spindle Sanding: precision sanding spindle Bwodpfoyvcw Asx Aknen Foiling: 8” wheel, temperature controlled, auto tension Grooving saw: 8” blade, 3 HP motor Capacity - Feed speed: 2.4 – 10.7 m/min - Thickness: 3 – 51 mm - Minimum part size: 76 × 76 mm Utilities - 3-phase power - Dust extraction: 3 × 127 mm ports - Approx. 400 CFM required Ideal For - Drawer sides - Cabinet manufacturing - MDF edge finishing - High-volume production

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min Bodpfx Aksyr Ugujnjwn • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR Bodstrd T Tepfx Aknewn 48.3mm 120mm CLR

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, cutting width (max.): 920 mm, cutting length (max.): 920 mm, Equipment: documentation/manual, safety light barrier, New oil change for hydraulics and gearbox performed. New color display with software update. Bwsdszbiwyepfx Aknon Cutting counter shows approximately 871,000 cuts. - ED program control - Light barrier - Air table - Folding rear table cover - Operating manual (copy) - Spare blades - Accessories for blade changes The machine is available immediately from stock. Testing and inspection can be arranged in advance.

Condition: ready for operation (used), Year of construction: 2010, overall weight: 250 kg, total height: 1,294 mm, number of axes: 6, This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, it's ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine. • Type: 6-axis industrial robot (supports up to 3 external axes via MultiMove; max 36 axes) • Maximum payload: 30.5 kg (with 1.2 m reach) / 20.5 kg (with 1.45 m reach) • Protection class: IP54 standard; IP67 optional (Foundry Plus) • Mounting options: floor, wall, shelf, tilted, inverted • Controller compatibility: IRC5 (Single, Dual, Compact), OmniCore (C30, C90XT, V250XT, V400XT) • Axis ranges: Bwedpfx Akox D E Tnenjn • Axis 1: ±180° • Axis 2: +136° / –63° (1.2 m) or +150° / –90° (1.45 m) • Axis 3: +55° / –235° (1.2 m) or +65° / –245° (1.45 m) • Axis 4: ±200° (default), max ±190° revolution • Axis 5: ±115° • Axis 6: ±400° (default), max ±288° revolution • Repeatability: • Position repeatability (RP): 0.02 mm (6 kg) / 0.02–0.05 mm (10 kg) • Path repeatability (RT): 0.06–0.19 mm • Maximum joint speeds: • Axis 1: 150–180°/s • Axis 2: 160–180°/s • Axis 3: 170–185°/s • Axis 4: 320–385°/s • Axis 5: 400°/s • Axis 6: 460°/s • Wrist torque: Axis 4 & 5 ≈ 8.58 Nm; Axis 6 ≈ 4.91 Nm • Electrical: 200–600 V, 50/60 Hz; max power consumption 0.58 kW • Dimensions: Base 484 × 648 mm • Height: 1069 mm (1.2 m reach version) / 1294 mm (1.45 m reach version) • Operating temperature: +5 °C to +45 °C

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 Bodpfxsza Ucxo Aknjwn • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Bwedpfx Aohv U Tfsknsn Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2018, controller manufacturer: Mitsubishi, controller model: GOT 2000, _____ Description: Year of manuf. : 2018 Control : Mitsubishi GOT 2000 Grinding length : 1200 mm Grinding width : 600 mm Equipment: Year of manufacture:2018 Control system:Mitsubishi GOT 2000 X-axis:1,600 mm Bwjdpfxozayntj Aknon Z-axis:650 mm Grinding wheel dimensions:400 x 50 x 127 mm Speed range:1,000–2,500 rpm Power:11 kW Magnetic worktable:1.200 x 600 mm Coolant supply:Coolant system with filter Emulsion mist separator:Reven Setup mode:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, spindle motor power: 5,000 W, spindle speed (max.): 24,000 rpm, This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual “0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details. • Condition: not rebuilt, without warranty • CE compliantMachining and axes • Continuous machining, machining from below, automatic return of workpiece to operator • 3 controlled axes: • X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor • Y-axis: drilling head travel • Z-axis: drilling • No workpiece length limitation • Rear workpiece exitReferencing and positioning • Dual “0” reference laser (transmitter/receiver) for start/end detection; compensates for dark-edged materials • Program readjustment for drilling from below for flushness on vertical/horizontal workpieces • Side stops with rollers (fixed and movable), mechanical digital readout, automatic alignment to 0-stop, removal up to 3 mm on the 0-line • Constant side clamping device for precise positioning on the 0-line • Adjustable zero point for 4-sided formattingTooling and heads • Automatic 4-station tool changer • 12 independent vertical spindles • Horizontal spindles: • X-axis: (2+2) • Y-axis: (2+2) • 1 saw (Ø 100 mm) • 5 kW electrospindle, ISO 30 taper, 12,000–24,000 rpm • Spindle speed (additional spec): 3500 rpm • Max vertical tool diameter: 35 mm • Max horizontal tool diameter: 12 mm • Max vertical drilling depth: 45 mm • Max horizontal drilling depth (X/Y): 30 mmCapacities • Max workpiece weight: 80 kg • Max workpiece size: X unlimited, Y 1200 mm, Z 50 mm • Min workpiece size: X 270 mm, Y 185 mm (70°), Z 4 mm • Feed rate: 25 m/minControl and software on machine • 19" 5/4 TFT LCD monitor • Industrial PC • WSC operator interface with Lister, parametric tooling, and parametric setup • CAD TPA EDI32 graphical programming, basic version • USB port • Saving of all files • Macro programming • Import of DXF filesUtilities and extraction interface • Dust extraction air volume: 2000 m³/h • Exhaust speed: 30 m/s • Exhaust ports: 2x Ø 100 mm + 1x Ø 50 mm • Motor: 1.7 kW • Compressed air: 7 bar • Max air consumption: 60 Nl/min Bodoy Hrdzopfx Aknjwn • CE STANDARDS Additional equipment • Office software – License

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool taper: HSK 63 Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Bedpoyrvzmjfx Aknswn Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements Bwedpfxjygia Ej Aknsn - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Bodpfx Aex T Ah Deknown Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: good (used), mileage: 223,014 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,660 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,130 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 2,200 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/Cassette Bsdpfxszaqnwj Aknjwn - Rear-view camera - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2550 kg, Gross vehicle weight: 3500 kg, Cabin type: Double cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, Carplay, GPS navigation, Color: White, Rear-view camera, Lighting type: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 110 kW (148 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Number of seats: 3, Seat arrangement: 2+3, Seat cover: Fabric, Seat adjustment: Manual, L2H2 Double Cab Air Conditioning Mbux10 Cruise Control Camera Navigation Auxiliary Heater Workshop Setup PDC Euro6, Spare wheel, Tire type: Winter tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,550 kg Payload: 950 kg GVW: 3,500 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): Valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €326 per month (van, 72 months); Please inquire for further information and terms.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, controller model: Sinmerik One, workpiece height (max.): 500 mm, workpiece diameter (max.): 675 mm, workpiece weight (max.): 500 kg, total height: 3,610 mm, total length: 3,970 mm, total width: 3,523 mm, table load: 500 kg, rotary table diameter: 600 mm, rotational speed (max.): 14,000 rpm, overall weight: 11,800 kg, spindle speed (max.): 14,000 rpm, coolant supply: 15 bar, distance table to spindle center: 175 mm, distance table center to spindle nose: 400 mm, spindle motor power: 37,000 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, HWACHEON D2-5AX Anniversary Model – The intelligent entry point into 5-axis machining The new HWACHEON D2-5AX was specifically developed to enable companies to make an economical and, at the same time, high-performance entry into modern 5-axis machining. As the official anniversary model from HWACHEON, it combines the highest manufacturing quality, modern control technology, and maximum flexibility for a wide range of applications. Whether it's single-part production, toolmaking, prototype construction, or automated series production – the D2-5AX impresses with its high precision, reliable processes, and a compact design with a generous work area. With travel ranges of 650 x 500 x 500 mm and a powerful rotary table with a 600 mm diameter, complex workpieces can be manufactured in a single setup. This reduces setup times, increases accuracy, and sustainably enhances productivity. The standard equipment includes an automatic BLUM tool measurement system ZX Speed and a BLUM workpiece measurement system. This minimizes setup times and ensures a high level of process reliability. Technical highlights • Travel ranges X/Y/Z: 650 / 500 / 500 mm • Rotary table Ø 600 mm • Powerful 37 kW main spindle drive Bwsdpfezaql Nsx Aknjn • 30-tool magazine • Automatic tool measurement system BLUM ZX Speed • Automatic workpiece measurement system BLUM • Compact and stable machine construction • High dynamics and precision • Suitable for single parts, small series, and series production • Optimized for modern manufacturing requirements Control options The HWACHEON D2-5AX is available with: • Siemens Sinumerik ONE for maximum connectivity and digitalization • Fanuc 31i-B5+ for the highest reliability and ease of operation in 5-axis operation • Optionally also available as an economical Fanuc 4+1-axis version Your advantages ✔ Economical entry into 5-axis machining ✔ Reduced setup times through complete machining in a single setup ✔ High manufacturing quality and process reliability ✔ Future-proof control technology ✔ Ideal for training centers, toolmaking, contract manufacturers, and production companies ✔ New machine with state-of-the-art HWACHEON technology The HWACHEON D2-5AX offers an exceptional combination of precision, performance, and economy, making it the ideal solution for companies looking to take their manufacturing to the next level. Further information, technical data, and individual equipment options are available upon request. Contact: Benjamin Hoffmann – ACROLOC Werkzeugmaschinen GmbH.

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Payment: As is customary for used machines, Bedpfet I T N Ejx Aknjwn net before removal.

Condition: used, device 10 spindle diameter 40 und 50 mm engine 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) mitre saw for the production of windows, elements, and doors. Frame-by-frame, series production, or individual parts production with 2 tenon and slot spindles, including Oertli tool set - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80) mm 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW - Double part package - Re-milling package with re-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw Bodpfsv Ag Tdox Aknown - Rung support strip - Includes extraction pipe system - Includes Oertli tool set - Further technical data and tool drawings available on request.

Condition: ready for operation (used), Konica Minolta Accurio Press C 4080 with a print run of 7 million copies. Equipped with: FS 532 RU 518 m PF 707m IC 609 As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to ensure that our customers receive machines in perfect condition. Bedpfezadfvox Aknjwn We ship copiers that originate from and are maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.