Used Coolant for sale (4,324)

Condition: reconditioned (used), Year of construction: 2012, MAZAK QUICK TURN NEXUS 100-II M Max. machining diameter: 280 mm Max. machining length: 334 mm Max. spindle speed: 6,000 rpm Max. milling spindle speed: 4,500 rpm Max. bar diameter: 51 mm Cjdpfx Aszav Eheirsgu Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - C-axis - Main spindle with bar capacity 51 mm - NC tailstock - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A Cedpfx Ajyifm Deirogu • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Cgodpoy H E Aksfx Aireu Technical Specification Counter Spindle No Driven Tools No

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Cedpfxszaunze Airsgu Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool taper: HSK 63 Cedpfjyrvzmjx Airjgu Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: excellent (used), Year of construction: 2019, Control system: Heidenhain TNC 620 Travel range X/Y/Z: 700/500/500 mm Spindle speed: 12,000 rpm Coolant pressure: 30 bar Chip filtration system Cjdozatnajpfx Airegu Measuring probe Tool magazine for 30 tools, SK 40 Chip conveyor

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 Cedpex Ry Atsfx Airogu 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 Cgedpfx Aex T Ah Dsirsu - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment • Belt-type oil skimmer • Triple light tower Cjdszar Aiepfx Airegu • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828D, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2018. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle, a table size of 1300 × 570 mm, and a tool changer with 30 positions. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm • Tool changer: 30 positions Cgedpfx Aiozarpcereu • Condition: Very good • Maintenance: Regularly maintained Additional equipment • High-pressure coolant • Renishaw probing system • Chip conveyor • Extraction unit Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm Cedpfx Aotq Nlcsiregu y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Cgedpfsgqg Sgjx Airou

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Codpfx Aisgmi Uneregu

Condition: ready for operation (used), Year of construction: 1992, spindle speed (max.): 36,000 rpm, bar diameter (max.): 60 mm, total width: 2,000 mm, total height: 1,900 mm, travel distance X-axis: 510 mm, travel distance Y-axis: 180 mm, overall weight: 4,300 kg, controller manufacturer: MAZATROL, controller model: T32-2, product length (max.): 2,700 mm, number of axes: 2, Multi-spindle turning machine manufactured in 1992. This Mazak Quick Turn 18 NSP features a maximum turning diameter of 260 mm and a turning length of 500 mm. It includes a tool turret with 8-fold / 16 positions and a spindle speed range of 36 - 3,600 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 18 NSP machine we have for sale. Contact us for further details regarding this machine. - Control: MAZATROL T32-2- Max. Turning Diameter: 260 mm- Max. Turning Length: 500 mm- Speed Range Main Spindle: 36 - 3,600 rpm- Speed Range Sub-Spindle: 36 - 3,600 rpm- Travel Z-Axis: 510 mm- Travel X-Axis: 180 mm- Spindle Bore: Ø 70 mm- Bar Loader Length: 3,000 mm- Collet Chuck Holder: For 185 E collets- Collet Chuck Range (Main Spindle): Ø 4 - 60 mm- Sub-Spindle: 3-jaw chuck, Ø 125 mm to Ø 70 mm- Tool Turret: 8-fold / 16 positions- Tool Eye: Measuring probe for tool measurement in working area- Main Spindle Chuck: KITAGAWA 3-jaw chuck Ø 254 mm- Coolant System: Complete coolant equipment- Foot Switch: 2 double foot switches for opening/closing both chucks- Machine Weight: 4,300 kg- Machine Dimensions (L x W x H): 2.7 x 2.0 x 1.9 m Optional - Drip pan (2500 x 2700 mm), IRCO 3000 mm bar loader Technical Specification Counter Spindle Yes Cgsdozarf Ropfx Aireu

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Cedpfx Aijku A A Hjrogu Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Cjdewuqbbepfx Airegu Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,225 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 9, total width: 2,275 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 74852---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Windows: Side windows, 2nd row, fixed, right and left including sliding door right and left * Heated rear window, fixed - Interior mirror - Partition with window * Radio: Ford audio system with 13 inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - 13 inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Limited-slip differential, mechanical * Auxiliary heating (fuel-water heating) with remote control including H7 AGM double battery * MTW conversion: RAUWERS PHOENIX SOLARIS special signal bar - electronic siren city/country - Control unit for the special signal system on the center console - Antenna for digital radio - Third beacon at the rear - Schnierle individual seats OTHER EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area (rear door flaps or rear swing door) * Airbag (passenger side) * Airbag driver side * Anti-lock braking system with electronic brake force distribution * Outside mirror housing in vehicle color * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. B. remaining range) and outside temperature display * Roof console * Double-wing rear door with 180° opening angle (without window) * ESP - hill start assist - safety brake assist - traction control * Electric front windows - with quick-up/down switch for driver and front passenger * Electronic parking brake * Ford Key Free system - including Ford Power start function * FordPass Connect - including live traffic information and WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Floor mats: rubber floor mats at the front * Grab handle, driver and front passenger side * Lockable glove compartment with lid * Interior lighting at the front with delay switch * Automatic air conditioning at the front - with recirculation heating - with R-1234yf coolant * Front headrests * 55 l fuel tank * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED indicators at the front - cornering light, static - high beam assistant * Cargo area lighting (LED) - extra bright * Cargo area floor: vinyl floor covering "Easy Clean" * Steering wheel, Sensico in leather look * Center console, small * Emergency call assistant eCall * Package: Technology package 2 (Limited) - Exterior mirrors with integrated indicators, electrically adjustable, heated and automatically foldable - Audio system 13?? Multifunction display and Ford SYNC - Pre-Collision Assist, camera-based - Fatigue warning - Traffic sign recognition system - Wrong-way driver warning function - Lane assist including lane keeping assist - Parking pilot system front/rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particle filter: Diesel particle filter * Radio accessories: 4 speakers * Tire repair kit Cgodpfxozam Uyj Airju * Tire pressure monitoring system * Wheels: Light alloy wheels 6.5 J x 16, 10-spoke design - with 215/65 R 16 tires * Windscreen wiper with rain sensor * Sliding door right * Mud flap rear * Mud flap front * High side paneling * Power steering * Seat belts - Seat belt tensioner and belt force limiter front - Warning system for driver's seat belt not fastened * Seats: Seat package 46 - driver's seat,

Condition: good (used), Year of construction: 2002, functionality: fully functional, Gildemeister GMC3 5, serial no.: 89000113B, year of manufacture: 2002. Includes: - Chip conveyor - High-pressure coolant unit Cjdpfozampdox Airegu - Bar feeder - Milling unit, cross-drilling unit - Accessories (collets, spare parts, etc.)

Condition: excellent (used), Year of construction: 2010, EUBAMA S6 is a 2010 model machine. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Maximum output (cycle/minute): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Cgjdpev Ef N Ajfx Airsu Number of processing units: 15 PRA 52 P IEMCA drive Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant tank Machine is in working condition

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Cedpfozak Hgjx Airegu Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 18 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 3.0 / 5.5 [kW] - C axis indexing precision : 0,001 [°] - Z stroke : 205 [mm] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 1,5 / 2,5 [kW] - C axis indexing precision : 0,001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - Number of motorized positions : 8 - Live tools speed : 12.000 [rpm] - Live tools power : 1 / 2 [kW] - X/Z stroke : 165 / 550 [mm] - Y stroke : -40 / +25 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 42 [m/min] - B Axis stroke : 100 [°] LOWER TURRET - Number of positions : 7 - Number of motorized positions : 7 - Live tools speed : 12.000 [rpm] - Live tools power : 1.5 / 2.5 [kW] - X/Z stroke : 120 / 250 [mm] - Y stroke : -20 / +40 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 50 [mm/min] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 10.000 [rpm] - Live tools power : 1 / 2 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 24 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.060 x 1.480 [mm] - Machine height : 2.420 [mm] - Machine weight : 4300 [kg] MACHINE HOURS - Number of working hours : 14998 [h] - Number of spindle hours : 11177 [h] EQUIPMENT - CNC : Traub TX 8i-s - Rotating guide bush - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit - Bar loader : IEMCA ELITE 220 / 32 XL - Oil mist extractor : ELBARON RON/A 1500 DH Cgodpfx Aiozbvnljreu - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] Cgsdpfsyacvtox Airsu - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 51458 [h] - Number of spindle hours : 16839 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] Cgjdpfx Aisyacvmsrju - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 51458 [h] - Number of spindle hours : 16839 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE Cgsdpjyacvgsfx Aireu - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 48352 [h] - Number of spindle hours : 12855 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Year of construction: 1977, condition: ready for operation (used), Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible. Cjdpozbuuwofx Airegu