Used Concrete Chain Saw for sale (9,142)

Condition: used, empty load weight: 7,200 kg, maximum load weight: 22,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 03/2010, next inspection (TÜV): 03/2024, wheelbase: 1,800 mm, color: red, mileage: 1,000 km, gearing type: other, driver cabin: other, * German trailer * 1st hand * available in multiple copies * 10 m³ concrete mixer * Stetter mixer-mixer-malaxer type AM 10 FHAC * 300 liter water tank * Dump extension * Access with platform * SAF axles * Disc brakes * Air suspension with lifting/lowering * ABS/EBS * GVW: 30,000 kg. * Payload: 22,800 kg. * Various Mercedes all-wheel tractor units from 2019/2020 available for an additional charge Crjdpsr Il Agefx Aileh If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, empty load weight: 6,610 kg, maximum load weight: 25,390 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2012, next inspection (TÜV): 03/2024, suspension: air, wheelbase: 1,800 mm, color: red, mileage: 1,000 km, gearing type: other, driver cabin: other, * German trailer * 1st hand * available in multiple quantities * 10 m³ concrete mixer * Karrena mixer-mixer-malaxeur type 10/5/F/ZA-1800 * 300 liter water tank * Dump extension * Access with platform * BPW axles * Disc brakes * Air suspension with lifting/lowering * ABS/EBS * GVW: 32,000 kg. * Payload: 25,390 kg. * Various Mercedes all-wheel tractor units from 2019/2020 available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at Credper Il A Djfx Ailsh We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: good (used), Year of construction: 2009, programmable optimization system with slide valve. Credpfxsz Ic Rvo Aileh

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, grinding wheel diameter: 30 mm, rotational speed (max.): 24,000 rpm, grinding spindle speed: 24,000 rpm, input voltage: 400 V, New saw blade grinding machine – chip breaker groove grinding machine (demonstration machine) Grinding range approx. 100-630 mm diameter Tooth pitch of saw blade max. approx. 20 mm Control: Siemens PLC with automatic end shut-off after the grinding process Grinding spindle: High-frequency spindle, 24,000 1/min. Power 800 watts! Cooling: Minimum quantity lubrication Bebeqpdi Rerqbnfboln Saw blade clamping: pneumatic Gearbox: running in an oil bath Adjustment of saw blade thickness: via a pre-tensioned ball screw drive with no play Grinding stroke: via heavy-duty linear roller guide Grinding speed continuously adjustable (minimum to maximum) Accessories: - 1 set of reducing rings 16x22, 25, 32, 40, 50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Cedpfx Aisz Ikp Hjlorh Compressed air connection: required for saw blade clamping and minimum quantity lubrication (very low air consumption)

Condition: good (used), Year of construction: 2009, Multrip saw for grooving foam/plywood/MDF/composite Maximum working width : 2500 mm Crodpfx Asz Ii N Eoileh Maximum cutting hight : 50 mm Infeed conveyer table with adjusteble speed Has been used for cutting tracks in foam, for the inner core in windmill wings ( so the foam can bend in any angle ) Can be used to cut tracks/grooves in plywood/MDF/composite/simillar.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,100 mm, saw blade diameter: 250 mm, height adjustment type: pneumatic, actuation type: pneumatic, total length: 4,100 mm, total height: 2,200 mm, overall weight: 700 kg, Equipment: CE marking, scorer, Available from the last week of August. We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, manufactured in 2022. The machine was installed and put into operation at our facility in May 2023. Credpfx Ajyxv T Roiljh Holzkraft VPS 2241 VR ED – vertical panel saw (commissioned in 2023, excellent condition) The machine is connected and can be tested. Selling my vertical panel saw, Holzkraft VPS 2241 VR ED, purchased and assembled new in 2023, and therefore in very good condition. Selling due to expansion. Features & Highlights: • Scoring device for clean, tear-free cuts • Digital measuring displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Vertical/horizontal switching • Robust, torsion-resistant machine frame • Integrated dust extraction for direct connection to a dust extraction system The machine runs perfectly, no defects. Technical Data: • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg Condition: • Year of manufacture 2022 / Installation: 2023 • Low usage • Ready for immediate use If you have any questions or require more information, please send us a message or call us.

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Cedpfx Aioz Il Evolsrh Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Crsdez H H R Ropfx Ailjh

Condition: good (used), Year of construction: 2010, MASA 2250l/1.5m3 planetary mixer, year of manufacture 2010 Crsdpfx Aijxl R Sloleh

Condition: excellent (used), Year of construction: 2018, HCV sling beams 2.2 tons - length 2m; Beam 6 tons - length 5m; Beam - 6 tons 6m; 6 tons 7m. About 50 pieces available in the offer. Price depends on lifting capacity, quoted price is for 1 piece. Cjdpfxexl Ruto Ailsrh

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Credpfxsud At Ro Ailoh

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cedeufgnzopfx Ailerh Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Csdpsz Ehvxsfx Ailorh

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Parts shown by hand not come. Codpfxjz Egngs Ailsrh

Condition: used, Year of construction: 2018, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 75 mm, MULTI BLADE CROSS CUT SAW MCEL 75 Crjdpfx Asz D Utzoiljh • Max. cutting height: 75 mm • Number of saws: 5 pcs • Power: 5x4 kW

Condition: used, Technical details: dimensions of saw-band: 5750 mm throat: 605 mm workpiece height: 460 mm max. table load: 250 kg table - inclinable: 15 -30 Grad band speed: 27 - 2200 m/min table height: 1125 mm Table dimensions: 740 x 785 mm motor capacity: 5,5 kW machine weight approx.: 1750 kg dimension machine approx.LxWxH: 1,82 x 0,97 x 2,55 m Machine is sold without electrical control cabinet! This machine was integrated into a production system and operated as part of a larger manufacturing process. The Mössner Rekord SSF 630 is a heavy-duty vertical industrial band saw designed for metal and special materials. It belongs to the renowned REKORD series by Mössner (Germany) and is considered an extremely robust and precise machine for workshop and industrial applications. The SSF 630 is suitable for sawing: ·Steel ·Stainless steel ·Aluminum ·Tool steel ·Plastics · Special materials Cjdpfey Rm T Esx Ailorh *

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Csdpjwqplkjfx Ailerh Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units of Behringer HBE 321 A dynamic new machines available for immediate delivery from stock. Attention: You can receive up to 15% funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active cut monitoring (Pos. 22) Cedpfx Aiez Epy Sjlsrh BEHRINGER screw-type chip conveyor (Pos. 105) Automatic bar-end detection (Pos. 535) Lighting (Pos. 941)

Condition: used, Year of construction: 2001, saw-blade dia. 400 mm Crjdpfsz Eux Tsx Aileh Saw blade mounting hole 32 mm Saw blade motor performance 1,5 kW Saw blade motor speed 2.800 1/min cutting speed 59 m/s operating pressure 6÷7 bar Dimensions (LxWxH) 920 x 1.060 x 1.450 mm weight approx. 214 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, saw-blade dia. 500 mm Crodpfxewhf Ips Ailsh Cutting height 120 mm Motor output 5,5/7,5 kW working length 4100 mm

Condition: new, cutting width max 610 mm Cutting height max 200 mm Saw blade diameter 650 mm Motor output 11 kW Credpsyi Hthjfx Ailoh

Condition: new, engine output 5 kW saw-blade dia. 300-350 mm Working speed 0-40 m/min Crsdpowli Nrsfx Aileh weight ca. 1.300 – 1.800 kg kg

Condition: new, 0 4000,5000 mm Crodpfx Aijxmk Amoljh Working height 120 mm 0 ja

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW Cedpfexmk Ebsx Ailsrh - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: new, mm Working height bei 90° = 290 mm 0 45°/90°/45° 0 weight 1800 kg Cutting height at 45° 210 mm Cjdjy I Db Ujpfx Ailorh