Used Chain Trencher for sale (2,479)

Condition: used, Year of construction: 1990, Engine power: 2 hp Itjdjx Edl Sepfx Ah Njb

Condition: used, Used chain cutter older model Itedpfx Aew Nab Eeh Neb stationary version Availability: short term Storage location: NRW

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block. Itodpfswd Tgfsx Ah Nsb

Condition: new, Year of construction: 2025, Pile Driver YCR260 Isdpfx Aoxzukqeh Njtb

Condition: used, Chain conveyor IDC000113 Itodpfxsvlc Ngs Ah Nsb - total length: 30 m - width: 1 m - height: 850 mm - electric motor: 11 kW

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Ijdpsv Eagvefx Ah Nstb

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm Itedpfx Aeufib Rjh Njb - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: Itedpfjtp S E Ejx Ah Neb – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, Length: 7,5 m Electric motor: 1,1 kW each rail Chain conveyor for board packs Itsdpfxsmrzthe Ah Nob - Length: 7,5 m, - Electric motor: 1,1 kW (each rail).

Condition: used, Roller conveyor with chain cross conveyor Iedpoi Sdk Sefx Ah Nstb Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: used, Length: 6 m Itedpfxsmu Tdyo Ah Nsb Chain conveyor for board packs: - Length: 6 m, - Between chains: 1,45 m/1,35 m, - Rails: 3 pcs.

Condition: good (used), Year of construction: 1985, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Steel, electric chain hoist with chassis -Chain hoist: Type T 302 L, load capacity 500 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5 m -Crane chassis: Maximum beam width 135 mm -Dimensions: see photo and technical drawing Itedpsya Aiysfx Ah Njb -Transport dimensions: 600/550/H420 mm -Weight: 49 kg

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition Itjdpfoxcbnljx Ah Neb

Condition: excellent (used), Catalogue number 7860 TECHNICAL DATA - Track width: 370mm - Roller width: 400mm - Saw blade diameter: 225-350mm - Bore diameter: 80mm - Max cutting height: 120mm - Table width with clearance: 670mm - Table length: 1650mm Top section: - Kickback devices - Slip-type steel feed roller - Kickback devices - Slip-type steel feed roller - Saw spindle - 3 pcs slip-type steel pressure rollers Bottom section: - Kickback devices - Track - Central lubrication - 2 feeding speed options + stepless adjustment, 1.5kW - Main motor: 30kW - Extraction port diameter: 170mm - Overall dimensions (L/W/H): 2200x1550x2100mm - Weight approx.: 3000kg ADVANTAGES – Italian-made – Stepless speed adjustment – Upper control panel – With laser – Used multi-blade saw, very good condition Itedpox U Tmmefx Ah Njb Net price: 55,900 PLN Net price: 13,300 EUR (depending on exchange rate 4.2 EUR) (Prices may change with higher exchange rate fluctuations)

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Serial No.: VC 000876 S Year of manufacture: 2010 Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Emergency stop Itodpfjx Urb Nex Ah Njb - Suspension eye on crane top - Without trolley Weight: 65 kg Good condition

Condition: good (used), Chain mortising machine / slotting machine. Could be a Hema or equivalent model. Chain width 40 mm. Mortising depth 175 mm. Slot length approx. 220 mm. Travel in x-axis approx. 120 mm. Table tilting up to 45 degrees. Machine is functional. Lever holder is partially broken—see photos. Height approx. 1800 mm. For details, dimensions and condition, see photos. You will receive an invoice with differential taxation applied according to Section 25a. VAT cannot be shown separately. Iedsya Damspfx Ah Nstb

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available. Iodjt E Nw Tepfx Ah Njtb

Condition: used, Year of construction: 2010, operating hours: 11,300 h, * Caterpillar 319 DL tracked excavator * Year of manufacture: 2010 * 11,300 operating hours Iodpfx Ahoyav N Hs Notb * 22,300 kg * 93 kW CAT C4.2 engine * Oilquick OQ 70/55 SW fully hydraulic quick coupler * Air conditioning * Camera * Transport width: 3 m * Track shoe width: 85 cm * All hydraulic lines

Condition: used, Year of construction: 2019, operating hours: 576 h, Wacker Neuson tracked excavator ET 145, hydraulic quick coupler HS 10, 800 mm digging bucket with teeth, 1000 mm digging bucket with cutting edge, 1800 mm hydraulic ditch cleaning bucket, air conditioning, German vehicle put into operation in March 2020. Iedpfx Aheyavkds Nstb

Year of construction: 2002, condition: excellent (used), We offer a Redler chain conveyor from Haas for sawdust, wood chips, etc. Length: 21.00 m Channel: 100 cm wide, 70 cm deep Outer width: 120 cm in the middle, 155 cm wide at the curves Outer height: 85 cm Double chain Solid, heavy-duty feeder with two curves Inclined section: 7.50 m long, 60° angle Horizontal section (bottom): 6.50 m long Horizontal section (top): 7.50 m long Very good technical condition Iodpfx Ajyarg Ujh Nstb

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations) Itodpfjx Tpudox Ah Nsb

Condition: used, System D8 brand painting chain, 94.50 linear meters, complete with towing, tracks and chain. Itsdpfx Asm D Hcfoh Neb

Condition: excellent (used), Chain chisel KF20 Iedpjuhn Afofx Ah Netb With chain set Chain chisel can also be used as a hand chisel

Condition: good (used), Year of construction: 1991, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist -Type: GM Load capacity 250 kg -Main stroke: 10.0 m/min Itodpfxsx Tdwge Ah Nsb -Fine stroke: 2.5 m/min -Chain length: 3 m -Transport dimensions: 550/340/H350 mm -Weight: 33 kg

Condition: used, - Oilquick- 2 buckets- Particulate filter Itjdpfx Ajyakfcsh Nob