Used Concentricity Test Instrument for sale (11,231)

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C Iedpfjx D Abpjx Ahvjtd - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.H. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Itodpfx Ahoklv H Isvjd Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Itedoyg I Eyopfx Ahvsd Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Modular Environmental Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and cell tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and test environments (subject to customer-specific safety concept/BMS). Description: For sale is a professional environmental test chamber by Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing, making it ideal for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. The chamber is particularly suitable for: - Functional and service life tests - Material and component testing - Pre-aging and climate simulation Itjdpfx Ahoygvw Rsvsd - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with the appropriate customer-side safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General Information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% rH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Power supply: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Environmental test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see picture) (Modifications and errors in technical data and specifications excepted!) For further information please feel free to contact us by phone.

Year of construction: 2018, condition: ready for operation (used), A test station for steering wheel testing is available. Workpiece: steering wheels, operating pressure: 6bar, test processes: ALDW/heating mat resistance/horn contact force measurement/horn contact travel measurement. Machine dimensions X/Y/Z: approx. 1600mm/1800mm/2200mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Itodpfx Ahjyvixhovjd

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel Iedpfx Aevb Hanehvetd - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Iodpfx Asvb E Uqehvotd Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: Iedpfex Anipsx Ahvotd - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Material Testing Machine Type RME 250 kN • Load frame and drive unit by Schenk Trebel, year of manufacture 1985, total height approx. 3.3 m. Traverse stroke approx. 2 m • Modernization around late 2003: Equipped with "testControl" control electronics from ZwickRoell • Retrofit in 2010: Universal extension measurement system MultiXtens from ZwickRoell, with swiveling device and two pairs of gauge arms (see photo), plus a new testControl module • Info: The testControl module operates with the current software "testXpert III" from ZwickRoell (one license for testXpert III version 1.51 is included in the price) • Temperature chamber (see photo) that can be moved into the test area of the machine, built 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable with liquid nitrogen down to approx. –40°C • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN, and 500 N (see photo) • 2 wedge specimen holders (see photo) Accessories (according to the photos or the MultiXtens system) can be sold separately upon request. Condition of the machine The machine has been in use for testing until early 2026. Utilized for testing: The 50 kN load cell and traverse displacement sensor (both sensors last calibrated on 06.05.2024 incl. standard inspection). A fault in the drive servo amplifier (component in the testControl module) has led to frequent connection interruptions to the software and drive stop until the hardware and software are restarted, starting in autumn 2025. The servo amplifier or the entire testControl module will need to be replaced (cost information available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units visible in the machine on the photos will be removed and remain with the seller. Isdeyhb Rlopfx Ahvotd

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Itedpfxjw T Rq Sj Ahvsd

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Itodpoyr R Uhsfx Ahved Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system Itedjx Hf A Ropfx Ahvjd - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Condition: ready for operation (used), SBM Hopper with Vibrating Chute and Grizzly Screening Machine Brand: SBM Austria Dim. Hopper: 6000 x 2500 x 1000 mm Vibrating Chute: Length 3500 mm – width 1200 mm. Driving: 2 pieces vibration motors of each 3,5 kW. Surface Screen: 2200 x 1200 mm. Isdpfjyuk Uajx Ahvetd Driving: E-Motor 11 kW

Year of construction: 2017, condition: good (used), evopro test bench for printed AmbientLight modules P585 Manufacturer: evopro systems engineering AG Description: Test bench for printed AmbientLight modules Project no.: P585 Serial number: 0001 Year of manufacture: 2017 Power supply: 230 V / 50 Hz / 13 A (L+N+PE) Design: Enclosed test bench for printed AmbientLight modules Structure: Aluminium profile frame with complete test cabin Application: Optical and functional testing of lighting and AmbientLight components Location: Schierling Itjdpfx Asyrnazehvjd Inspection possible by appointment.

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Itsdpfx Ajhyly Rohvjd Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Ijdpfx Asyt Idvjhvetd Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting.

Condition: excellent (used), RMS Type: SW 3509 + TGD 6000-000.00 amplifier and fan RMS Electrodynamic Vibration Test System Technical data: Sine: 7.5 kN Random: 6.7 kN Itedpfxjhylyms Ahved Shock: 13 kN Displacement pk-pk: 25.4 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Acceleration: 100 g Cooling: Air-cooled Total weight approx. 4000 kg Condition: used Scope of delivery: (see image) (Changes and errors in technical specifications reserved!) We are happy to answer further questions by phone.

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, Material testing device for tensile and compressive strength testing Itodsytrqyspfx Ahvod Includes various spare parts, workpiece holders, spirit level, and CDs for the software

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Iodpsytn Hkofx Ahvjtd Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Itodpfxeydanhj Ahvod Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: Itsdpfjydazuex Ahvjd - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Itjdpfx Asyc U Rbehved Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2024, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Ijdpfxsd R Dqbo Ahvstd Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PM3, Universal Testing Machine PM3 (2020) Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Itjdpfeyc U Dbjx Ahvjd Load Cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, our basic software provides the capability for control and analysis. This enables the creation of various test sequences and the generation of test reports. Furthermore, you have the option to further process the raw data in your own programs. Optional: – Delivery & Commissioning – DAkkS or factory calibration according to DIN EN ISO 7500-1 – Grips and fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Iodpfxod R Dp Ee Ahvetd Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.