Climatic test chamber -42 to +190°C

Memmert CTC 256 256 Liter

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Lodpfxou Ngrqj Af Sert Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Lrjdpsnxk Ixsfx Af Sst

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed Lredpfx Aotndpzsf Sjt - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: excellent (used), functionality: fully functional, mileage: 170,000 km, first registration: 07/2001, fuel type: diesel, overall weight: 18,000 kg, wheelbase: 3,690 mm, fuel: diesel, brakes: other, emission class: euro3, suspension: other, Year of construction: 2001, Equipment: ABS, air conditioning, airbag, crane, fog lights, Iveco 190E 310 Eurotech Cursor Three-sided tipping body PM Series 12 crane with 4 hydraulic outriggers 4 Stabilizer legs Year: 07/2001 2 axles, 4x2 configuration Euro 3 emission standard Diesel engine ZF 16-speed manual gearbox Engine displacement: 7,790 cc Power: 228 kW (310 hp) Wheelbase: 3,690 mm Tipping body length: 4,300 mm Overall truck length: 7,070 mm Payload capacity: 7,600 kg Gross vehicle weight: 18,000 kg Rear air suspension Differential lock Air conditioning ABS Electric mirrors and windows Radio Mileage: 170,000 km. DESCRIPTION: Iveco 190E 310 Eurotech Cursor Lredeznl Dzopfx Af Sst Three-sided tipping body PM Series 12 crane with 4 hydraulic extensions 4 Stabilizer legs Year: 07/2001 2 axles (4x2) Euro 3 Diesel ZF 16-speed manual transmission Engine displacement: 7,790 cc Power: 228 kW (310 hp) Wheelbase: 3,690 mm Tipping body length: 4,300 mm Overall truck length: 7,070 mm Payload: 7,600 kg Gross Vehicle Weight (GVW): 18,000 kg Rear air suspension Differential lock Air conditioning ABS Electric mirrors and windows Radio Mileage: 170,000 km.

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Ljdpfsyfw H Rex Af Sjrt Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: new, length 1200 mm width 600 mm height over floor 860 mm table load capacity 250 Kg dimensions 1200 x 600 x 400 m weight 49 kg Workbench with 4 drawers and solid wood worktop Dimensions of the large drawer (WxDxH) 940 x 400 x 80 mm Lsdpfxevn U H Nj Af Sort Dimensions of the small drawer (WxDxH) 460 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 465 x 395 x 440 mm Height adjustment max. 30 mm

Condition: new, Year of construction: 2024, Stock items available for immediate delivery consisting of: ᐳ Stop rail, 3 m long ᐳ 2 complete stop units ᐳ 1 measuring scale, right to left ᐳ 1 measuring scale, left to right ᐳ Fastening screws - The wooden base strip, 50 x 45 mm, onto which the stop rail is screwed, is not included in the scope of delivery. Lredefnp Swopfx Af Sot

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Ljdpozlidtsfx Af Ssrt Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time Lsdszizmzjpfx Af Ssrt - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Year of construction: 2007, condition: like new (used), functionality: fully functional, Special Opportunity! Only ONE unit left! We are able to offer you this top-quality Thermo / Heraeus B 6200 incubator, in mint condition, from the inventory of the State of Thuringia. The B 6200 is one of the most reliable units on the market and has become indispensable in laboratories worldwide. Known for its high precision, it is also regarded among professionals as especially robust and durable. This device was purchased new by the State of Thuringia in 2007 and has since only been operated annually for calibration purposes. Its condition is immaculate both visually and technically – see photos. A particular highlight is the enhanced specification, far surpassing the standard model: this B 6200 features additional safety switches, a timer, and microprocessor-controlled temperature regulation. The price refers to one incubator with the described equipment and an internal shelf as shown. Technical Data: Thermo / Heraeus B 6200 incubator Lrjdewcznbepfx Af Set Manufacturer: Thermo / Heraeus, Made in Germany Internal volume: 196 liters. Temperature range up to 70°C. Fresh air and exhaust ports. External dimensions (W x H x D): 895 x 816 x 715 mm Internal dimensions (W x H x D): 554 x 644 x 550 mm Weight: approx. 90 kg 230 V, 50 Hz, 2.6 A, 0.6 kW Features: Digital temperature controller with microprocessor monitoring, over- and under-temperature protection. Timer. Stainless steel inserts. Applications: Microbiological incubation in pharmaceutical, medical, and microbiological laboratories; hygiene testing in pharmaceutical, food, and cosmetics industries; long-term storage tests; and more. This offer is directed exclusively at commercial customers. An invoice with VAT shown will be provided. Private buyers may purchase the unit "on behalf of a customer." Direct commercial sale to private individuals is expressly ruled out. The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims due to gross negligence or intentional misconduct by the seller, or any injury to life, limb, or health. Shipping will be arranged within three working days of payment receipt via freight carrier. Alternatively, you may collect the device from our premises by appointment during business hours. Total shipping weight including accessories and pallet is approx. 110 kg. If you have any questions, please contact us directly using the details provided.