Gear Testing Machine

KLINGELNBERG PFSU 1600

Condition: excellent (used), Herringbone Gear Generator MDV 2000 MDV 2000 Characteristics: Max. wheel diameter: 2000 mm Lajdpfefx Ibnsx Anujc Min. wheel diameter: 50 mm Max. module: 12 Min. module: 3

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm Lajdpfx Anevc Apbjusc without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. Lasdpfx Aextxk Ssnuec You can find further milling machines from well-known manufacturers on our website.

Condition: like new (used), Year of construction: 1998, functionality: not functional, turning height: 1,900 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,630 mm, faceplate diameter: 2,500 mm, total height: 5,000 mm, total width: 4,800 mm, total length: 4,800 mm, rotary table diameter: 2,500 mm, table load: 15,000 kg, table diameter: 2,500 mm, year of last overhaul: 2025, warranty duration: 12 months, overall weight: 38,850 kg, table speed: 2,500 mm/min, SC2700 Vertical Turning Lathe 2700 with 2 Work Heads - Retrofit Completed Specifications: Retrofit status: recently upgraded (mechanical, electrical, hydraulic systems), in course to be put under power. Electric cabinet: new electric equipment, cables, portcables, covers. Main motor: original 55 kW, revised. Condition: mechanically like-new, low working hours. Inspection: available any time. At request, it can be overhightened for a higher workpiece, or receive an CNC upgrade. Price, install and transport on request. More technical specifications on request. Lodpfeygldgex Anusac

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) Lsdsvgmr Ispfx Anueac WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 Ljdjx Aq Egjpfx Anusac max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Lasdpfx Aoruakgsnuoc Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Modular milling cutter Module 8 Lasdpfsdklt Njx Anuec 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Lajdpfx Anjr A Hcbeujc Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: excellent (used), Faceplate: 2500 mm Max. turning diameter: 2800 mm Max. turning height under tool edge: 1500 mm Laodpfx Ansy D Tw Doujc Spindle speed: 110 rpm Workpiece weight: 10 tons Digital readout Jaw boxes