Used Complete for sale (12,947)

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm Gsdpfx Akoz Alfus Ueug • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00578, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: R-30iA Mate, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-10iA manufactured in 2011.08. The robot comes with an R-30iA Mate controller including iPendant.   Gusdpez Anlqefx Ak Ujg Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-10iA Model Number: A05B-1221-B402 Year of Manufacture Robot: 2011.08 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1420 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 130   Controller: R-30iA Mate Year of Manufacture Cabinet: 2011.08 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: ready for operation (used), functionality: fully functional, Complete line for filling and packaging wine bottles. Gedsyn I Tmepfx Ak Ujug For a full description, see the attached PDF file.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Distance between saw blades: 45 mm MACHINE DETAILS Operating voltage: 400 V Gedpezvv Rnsfx Ak Uoug Frequency: 50 / 60 Hz Power: 6.5 kW Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Completely made of corrosion-resistant AISI 304 steel Two parallel saw blades Fully mechanized wheels Adjustable speed of the side blade The machine comes from a business liquidation.

Condition: excellent (used), perfect condition Gsdpfjxnzmxjx Ak Ueug

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Godexw Ubnepfx Ak Usug

Condition: used, Year of construction: 2012, Manufacturer: Wittmann Gujdpfsvyhtmjx Ak Ueg Type: 702 Year of manufacture: 2012

Condition: new, The new log band saw from Hauslhof is suitable for a log diameter of up to 65 cm and has good cutting accuracy. Its ease of use makes it ideal for forest owners who want to start cutting their own wood, regardless of the type of wood. It can be extended indefinitely with extension sections and can be easily assembled and dismantled. Manual feed and cutting height adjustment mean low maintenance. CE tested. Guodpfx Akjvru Ubj Uog Technical data: max. log diameter: 650 mm max. board width: 475 mm motor output power S6: 6.5 kW (5.5 kW S1) 400 V cutting length basic version: 2950 mm saw band length: 3658 mm saw band width: up to 35 mm band speed: 20 m/sec cutting length extension section optional: 1.95 m weight: 335 kg possible optional equipment - extension section extends the cutting length by 1.95 m each

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line - 1 x welder VSM40/26 - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table - 1 x 2 head corner cleaner with drilling head's - 1 x outfeed table Gujdpfsvkdubox Ak Uog adjusted for Rehau Brillant/Euro70, Synego and Geneo the line is still in production, can be inspected in working conditions fully functional, very good conditions

Condition: used, type of input current: three-phase, cutting length (max.): 6,000 mm, cutting height (max.): 650 mm, roll diameter: 700 mm, saw drive: 27,200 W, input voltage: 380 V, conveyor belt speed: 30,000 mm/s, Equipment: documentation/manual, For sale: used but well-maintained automated wood cutting line NG-700L, manufactured in Lithuania. The machine has been lightly used and is still connected; last time it was operated about a year ago and worked without issues. The line is offered complete with: log loading ramp, receiving and sorting table, auxiliary outfeed table (roller conveyor), control cabinet, detailed technical drawing and leg layout scheme for relocation. Technical specifications: Gsdpfx Aow N S S Ajk Ueug Log length capacity: 2.5 – 6 m Max. log diameter: 65 cm Saw wheel diameter: 700 mm Saw linear speed: 30 m/s Productivity: 1.5 – 3.0 m³/h Rated supply voltage: 380 V ±19 Maximum power consumption: 27.2 kW Log clamping and turning: hydraulic Dimension setting: programmable Line operation: operator console Additional information: The equipment is in good condition and ready for further use. Full documentation and drawings are included to facilitate transport and installation.

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Godpoikfmhefx Ak Uoug

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Guodpfxorrxtpo Ak Usg Very well maintained. Infinitely variable from 0 - 12m / min.

Condition: good (used), Year of construction: 2008, I sell the complete set of machines for production of wooden dowels. Year: 1993 - 2008 Brusa di Garboli TA30 L.Loser AA200 Moulders Cutting machines with feeders Cylinder sanding machines Totally 10 machines. Suitable for dowels 6-8-10-12-16mm. Very good condition. Gujdpfjt I U Amjx Ak Uog Available immediately

Condition: reconditioned (used), Complete pump assembly for Demag ET 330. Guedpfxsfwctps Ak Ujg

Year of construction: 1999, condition: good (used), functionality: fully functional, Suite arrêt de production, ligne complète de granulation pour matières plastiques comprenant trémie de chargement, vis de chargement, Extrudeuse monovis diametre 105 avec vis forceuse, doseur, puit de dégazage, pompe à vide, filtre à tiroir avec groupe hydraulique, bac inox de refroidissement, sécheur de joncs, granulateur Buhler, tamis vibrant Avitech, soufflerie, cyclone et porte big bag. Vis et fourreau refait en 2021 (facture). Pupitre de commande refait. armoire électrique complète. La vis a un profil généraliste qui permet de regranuler du PE, PP, PS, ABS et PA principalement. Godpfsu E E Ezox Ak Usug

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs Guodjykr Aqspfx Ak Ujg 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Year of construction: 2011, condition: good (used), Due to repowering, a complete PV system with approximately 2,500 modules rated at 90 watts/module is available. Modules: Sharp NAG 090B5 90 watt, micromorph/tandem Inverters: 2x Kaco XP 100 9x Kaco 02Xi Commissioned in 2011 The modules have already been dismantled. Partial sale at a lower price is also possible. Ideally suited for halls or similar roof surfaces. Collection only. Technical documentation available. Gusdpfx Aoytx Tzsk Usg Sale without warranty!!!

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Ultra-high productivity cutting line comprising: * POLAR 137 X Paper Cutter, year 2005 Usable working width: 137 cm. 2 HSS blades, stainless steel air table 80x100 cm with lateral air tables, connected to the Jogger and Discharge System * POLAR RA 4 Jogger, year 2005 with air-removal roller and safety barriers * Automatic discharge system (palletizer) model Polar TR130ER-4 RIGHT, year 2005 * Pile Lifter Polar LW 1000/4, year 2005 Line installed and ready for any test. Technical and aesthetic condition like new. Ready for immediate delivery. Godpfx Aoyzxlhjk Usug

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Gusdszx Eaqspfx Ak Ujg Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. Gusdpsywkc Rsfx Ak Ujg 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Gedpfx Aow I Tt Sok Ueug Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Guodpfjxyafkjx Ak Uog Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00546, load capacity: 280 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280 manufactured in 2015.08. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280 Model Number: A05B-1335-B205 Year of Manufacture Robot: 2015.08 Warranty term (months): 12 Gedez Ank Tepfx Ak Ujug   Payload (kg): 280 Reach (mm): 2655 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1700   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00580, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Godpfx Aoz Anlkok Uoug Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00464, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Godez Ankyspfx Ak Uoug Model Number: A05B-1125-B205 Year of Manufacture Robot: 2010.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.04 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10